• 패션비즈니스
• /
• 제17권1호
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• 대한전자공학회논문지SD
• /
• 제37권10호
• /
• pp.1-10
• /
• 2000

소자의 크기가 딥 서브 마이크론 이하로 작아짐에 따라 극 저 에너지 이온 주입의 정확한 모델링은 중요함을 더하게 되었다. 본 논문에서는 이체 충돌 근사(Binary Collision Approximation)에 기반을 둔 3차원 몬테카를로 이온 주입 시뮬레이터를 개발하였다. 이를 위하여, 저 에너지 이온 주입에 있어 이체 충동 근사 방법의 제한 요소인 전자 에너지 정지력에 대한 모델을 개선하였고, 다중 충돌 계산을 위한 모델을 적용하였다. 계산된 이온 주입 도펀트 분포 및 결함 분포는 실제 실험치와 일치함을 확인하였다. 또한, 3차원 이온 주입 시뮬레이션에 있어 계산 시간의 효율을 극대화 하고자, 본 연구에서는 이온 분포 복사법(Ion Distribution Replica Method)을 개발하였고, 복잡한 토폴로지를 갖는 다층 에이어의 이온 주입 공정에 있어 빠른 수행 시간 및 결과의 정확성을 확인하였다.

• 복식
• /
• 제51권7호
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.304-309
• /
• 2013

Shark skin has functionalities such as self-cleaning and antifouling; it also exhibits excellent drag reduction owing to a hierarchical structure of microgrooves and nanometer-long chain mucus drag reduction interfaces around the shark body. In this study, the wettability of a shark skin surface and its replicas are evaluated. First, a shark skin template is taken from a real shark. Then, shark skin replicas are produced directly from a shark skin template, using a micromolding technique. The quantitative replication precision of the shark skin replicas is evaluated by comparing the geometry of the shark skin template to the replica using 2D surface profiles. Contact angles at the solid-air-water interfaces are evaluated for the shark skin template and its replicas under two conditions: with and without hydrophobic coating. The results show that the microriblets on shark skin improve the hydrophobic feature and play a critical role in self-cleaning.

• 치위생과학회지
• /
• 제12권6호
• /
• pp.566-571
• /
• 2012

제한된 조건 하에서 수행된 본 연구에서는 다음과 같은 결론을 얻었다. 1. 치형과 고정성 보철물을 근 원심 방향의 단면에 8지점을 선정한 후 서로 다른 두 가지 방식으로 적합도를 측정하여 비교한 결과 8지점 모두에서 유의한 차이를 보이지 않았다(p<0.05). 2. 8지점을 변연부, 경사부, 축벽부, 교합면으로 분류하여 비교한 결과에서도 역시 두 측정 방법 간에 유의한 차이를 보이지 않았다(p<0.05). 이와 같은 결과를 바탕으로 실리콘 복제본 기술을 이용하여 적합도를 측정하는 것이 치형과 고정성 보철물을 직접 절단하여 단면을 측정하는 것만큼 정확하다는 결론을 얻었다. 따라서 고정성 보철물의 적합도 측정 시 비 파괴적인 방법인 실리콘 복제본 기술을 이용한다면 치형과 고정성 보철물 모두 파괴하지 않고 측정이 가능할 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• 한국실내디자인학회논문집
• /
• 제18권3호
• /
• pp.66-73
• /
• 2009

In the digital age, as it is ambiguous to distinguish between the original and a replica, the order of reproduction which is more realistic than the reality is becoming a new cultural order. Before the period when digital paradigm dominates, always the reality has been an object to be copied. But, today is an age of Simulacre where code of digital technology dominates. Such a phenomenon is shown in the construction space without exception Gilles Deleuze who was a representative philosopher of the post-structuralism depicted the concept of Simulacre as an instant 'event' passing by without change in an object or substance. As the result of analyzing what kinds of feature for the concept of event is expressed in the digital space, a diagram itself could be a design process, the digital space with correlation was able to be created through the change in the meaning according to the changing image and my body which was the leading part to form primary space. In such a meaning, this study pays attention to Deleuze's 'Event(Simulacre)' concept. At this transitional period when a new concept of digital space is about to take root, the modern philosophers' theories and the discussions about spatial relativity should be continually studied, along with the development of spacial theories for the modem construction.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.44.2-44.2
• /
• 2009

BCP powder was synthesized using microwave hydrothermal process with mixed calcium hydroxide and phosphoric acid. After using replica method, porous BCP scaffold was fabricated. PU (Poly Urethane) was used as the fugitive skeleton to fabricate the porous scaffold. BCP powder was mixed in PVB (Polyvinyl butyral) and ethanol solution and then applied to the PU foam by dip coating. After several times of coating and the subsequent oven drying the coated PU foam was burnt out at $750^{\circ}C$ at air to remove the PU. The resulting networked porous composites were sintered at $1250^{\circ}C$, $1300^{\circ}C$ and $1350^{\circ}C$ in microwave furnace for 30 minutes. Material properties of the porous bodies like compressive strength and porosity were investigated. Detailed microstructure of the BCP porous body was characterized by SEM and XRD and TEM techniques. In our experiments, the relationship between mechanical property and viscosity of powder, sintering temperature was investigated.

• 대한치과기공학회지
• /
• 제41권1호
• /
• pp.9-19
• /
• 2019

Purpose: This study was conducted to comparative evaluate the marginal and internal gap of three-unit metal frameworks(Co-Cr) fabricated by wax milling method and digital light projection method of CAD/CAM systems. Methods: All the specimens were fabricated by three different fabrication methods: conventional wax up with casting(CWC), milled wax block with casting(MWC), digital light projection with casting(DLPC) (n=10 each). The marginal and internal fits of specimens were examined using a replica technique. The light-body silicone thickness was measured at 8 reference points(each abutment: 16 measurements). All measurements were conducted by a stereomicroscope. Digital photo were taken at $150{\times}$ magnification and then analyzed using a measurement software. The Mann-Whitney test was used for analyzing the results. Results: Statistically significant differences were found between the fabrication methods(p<0.001). The mean(SD) is ${\mu}m$ for fabrication methods, the mean marginal fit were recorded respectively, CWC 63(38), MWC group 50(33), DLPC 103(54) and the mean internal fit CWC 96(47), MWC group 116(41), DLPC 138(66). Conclusion : The marginal and internal fit were statistically different according to the fabrication methods(p<0.001). In all fabrication methods, the greatest misfit was found the occlusal area of all specimens.

• 한국의류학회지
• /
• 제43권2호
• /
• pp.204-214
• /
• 2019

A CAD program has recently been introduced that can be directly developed into a three-dimensional human body shape and made into a pattern. It is possible to fabricate a bra that reflects the volume and surface area of the breast; however, it still needs to be verified. This study investigates the average size and shape of 20 big-breasted women and designs a brassiere pattern for women with large breasts using a 3D Flattening function of OptiTex PDS v15.6. In addition, the study verifies the reliability of the proposed method compared to a conventional brassiere pattern. The study results are as follows. First, the three dimensional measurement values were smaller than the direct measurement dimensions when the three dimension measurement dimensions of the subjects were compared with the direct measurement dimensions, the replica measurement dimensions and the three dimensional measurement dimensions. Second, the 3D flattening pattern reflects the actual shape, length, and area of the actual breast when comparing a brassiere pattern using a 3D shape and pattern reflecting the direct measurement.