• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.115-123
• /
• 2016

In this study, the effect of energy and protein ratio on the nutrient availability and body weight gain was determined to find the proper nutrient level for the stage of replacement dairy heifers before fertilization at approximately 12~24 months old after birth. Dry matter intake showed that the TDN/CP rate of T1 (5.0:1), T2 (4.5:1) and T3 (4.0:1) resulted in similar values. Among feces, the ash content of T1 was 11.07%, which was significantly (p < 0.05) higher than that of T3 (9.69%). It was also significantly (p < 0.05) higher than that of T2 (10.32%). When the TDN/CP rate was increased, the ash content in the feces was also increased. Regardless of the initial weight, weight gain was increased significantly as the CP rate in the feed was increased on the $30^{th}$ day. On the $60^{th}$ day, T2 showed the highest rate of gain (p < 0.05). As the TDN rate was decreased or the protein rate was increased, weight gain was significantly (p < 0.05) increased. Regarding GPT level in the blood after finishing the test, T1 and T3 (112.6, 88.3 u/l) showed significantly (p < 0.05) higher value than T2 (50.9 u/l). For phosphorus level, T1 (46.3 mg/dl) showed significantly (p < 0.05) higher value than other treatments. For HDL cholesterol level, T2 (145.2 mg/dl) had significantly (p < 0.05) higher level than T1 (121.0 mg/dl) or T3 (132.3 mg/dl). For triglyceride levels, T3 (40.6 mg/dl) had significantly (p < 0.05) higher value than T1 (20.7 mg/dl) and T2 (29.0 mg/dl). For other blood parameters including BUN concentration, there were no significant (p > 0.05) difference among treatments. As a result, although feed intake and weight gain with TDN/CP rate of 4:1 showed best results, considering the excess body fat accumulation possibilities or blood metabolism, it seems 4.5:1 ratio is most appropriate.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.497-503
• /
• 2022

This study was conducted to investigate the horticultural media + decomposed granite + reused rock wool in the following mixing ratio: Control = 100:0, M1 = 80:0:20, M2 = 60:30:10, M3 = 40:30:30, M4 = 30:40:30, M5 = 0:50:50 (reused rockwool : decomposed granite : horticultural media) and develop the physicochemical properties and the growth of 'Sulhyang' strawberry runner plant. In the physical aspect of the horticultural media, statistical differences were recognized that the bulk density and particle density were lower in the control and M1. But the bulk density and particle density were high in the M3, M4, and M5, because it had high mixing ratio between recycled rock wool and decomposed granite. EAW and WBC showed a similar tendency. The air porosity and total porosity were higher in control and M1 than M3, M4, M5. Exchangeable cation (K⁺, Ca²⁺, Na⁺, Mg²⁺) and base replacement capacity (CEC) were higher in control and M1, than M2, M3, M4, and M5. As a result of the cultivation of 'Sulhyang' runner plant, the plant length was long in M2, 32.1 cm and smaller than M5 to 28.4 cm. However, if the crown diameter, which is the growth indicator of the runner plant, all 6 treatments were formed 11.23 mm-12.03 mm, which is considered to be suitable for the growth of the runner plant. There wasn't a statistical difference between the weight and dry weight of the root. As a result, the growth difference of the seedlings by the horticulture media was similar. Therefore, considering the physical properties of the horticultural media, it was judged that the air porosity and total porosity would be improved when the recycled rock wool and the decomposed granite were properly mixed rather than the use of the horticultural media as a single medium, which would be advantageous for irrigation management.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.103-111
• /
• 2012

One of the basic physical properties of the hardened cement paste, the rigidity, is deteriorated during concrete matrix forming, depending on the replacement rate of the crushed stone powder, and due to drying shrinkage. Therefore, the concrete containing crushed stone powder has been limitedly used as non-structural construction material. To improve these disadvantages, a hydrothermal reaction employing method can be considered. High-temperature and high-pressure water is involved in the hydrothermal reaction in the mixing with specific materials. The rigidity improving mechanism is related to the synthesis of calcium silicate. The calcium silicate is produced through reaction between calcium compounds and the silicic acid. Various kinds of calcium silicate can be produced depending on the CaO/$SiO_2$ mole ratio, the temperature of the hydrothermal synthesis, the pressure, and the reaction time. The product of the synthesis mechanism, tobermorite crystal, plays a pivotal role for the rigidity reinforcement. The crushed stone powder, analyzed in this study, contains 50 to 60% of $SiO_2$ and 10 to 20% $Al_2O_3$. The composite rate is appropriate to create the tobermorite crystal through formation of hardened cement matrix under the hydrothermal synthetic conditions and with the CaO in the cement. Moreover, further reinforcement was promoted using the property of material under the identical density through promoting the formation of tobermorite crystal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1642-1649
• /
• 2003

An experiment was conducted to evaluate the effects of phytase supplementation on the growth performance, nutrients utilization and bone mineralization in broiler chickens. Day-old broiler chicks (n=480) were equally devided into eight treatment groups and fed maize or wheat based isocaloric, isonitrogenous and isocalcium diets having two non phytate phosphorus (NPP) concentrations (0.50% and 0.30%) and two phytase levels (0 and 500 phytase units/kg diet) in a 42 days growth trial. Maize based dietary treatments were MC (NPP 0.50%, MN (NPP 0.30%), MNP (MN+500 units of phytase) and MCP (MC+500 units of phytase), whereas wheat based experimental diets were WC (NPP 0.50%), WN (NPP 0.30%), WNP (WN+500 units of phytase) and WCP (WC+500 units of phytase). The NPP levels were maintained by dicalcium phosphate. Reduction in dietary NPP depressed live weight gain and feed intake and increased feed conversion ratio (FCR). Phytase supplementation to low NPP (0.30%) diets significantly (p<0.05) improved the growth performances of broilers. The supplementation to low NPP diets allowed complete, safe and economic replacement of dietary inorganic P (dicalcium phosphate) to reduce feed cost per kg live weight gain of broilers. Reduction in dietary NPP did not affect retention of nutrients except phosphorus (P) but had a significant (p<0.05) depression in tibia ash and minerals (Ca, P) concentration in serum and tibia ash. Phytase supplementation at low NPP level was effective (p<0.05) in improving the retention of dry matter, Ca and P and Ca and P concentration in serum and tibia ash. However, the supplementation was not effective at high level of NPP (0.50%). There were no significant (p>0.05) differences in carcass quality among dietary treatments. The response of phytase was greater in low NPP and maize based diets as compared with high NPP and wheat based diets, respectively. The results show that phytase supplementation to low NPP (0.30%) diets improved the growth performance, relative retention of nutrients (N, Ca and P) and minerals (Ca, P) status of blood and bone in broiler chickens, with a better efficacy in maize based diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.888-898
• /
• 2018

Objective: The study was conducted to investigate the effects of replacing soybean meal (SBM) with different levels of detoxified Jatropha curcas kernel meal (DJM) in growing pig diets on growth performance, nutrients digestibility and meat edibility. Methods: A total of 144 pigs with initial body weight of $20.47{\pm}1.44kg$, were randomly allocated to 6 dietary treatments with 6 replications per treatment and 4 pigs per replication for a period of 79 days. Six diets (DJM0, DJM15, DJM30, DJM45, DJM60, and DJM75) were formulated using DJM to replace 0%, 15%, 30%, 45%, 60%, and 75% of SBM. From d 37 to 42, feces and urine were total collected from six barrows in each treatment. At day 79, thirty-six pigs were slaughtered for sampling. The feed intake and weight gain were recorded, while the intestinal morphology, digestive enzyme activities, nutrient digestibility and the content of residual phorbol esters in muscles were determined. Results: The results showed that increasing the replacement of SBM with DJM decreased the parameters including body weight, average daily gain, average daily feed intake, gain-to-feed ratio, weight and villus heights of duodenum, villus height and villus height/crypt depth of jejunum, digestive enzymes (protease, amylase, lipase, and trypsin) activities, and nutrients digestibility (nitrogen deposition, digestibility of nitrogen, energy digestibility, and total nitrogen utilization) (linear, p<0.05; quadratic, p<0.05) and there was no significant difference among DJM0, DJM15, and DJM30 in all measured indices. The highest diarrhea morbidity was observed in DJM75 (p<0.05). Phorbol esters were not detected in pig muscle tissues. Conclusion: The DJM was a good protein source for pigs, and could be used to replace SBM up to 30% (diet phorbol esters concentration at 5.5 mg/kg) in growing pig diets with no detrimental impacts on growth performance, nutrient utilization, and meat edibility.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.37-44
• /
• 2014

Recently, many efforts related to the utilization of industrial by-products have been made to reduce carbon dioxide emissions in the construction industry. Of these various efforts, concrete incorporating ground granulated blast furnace slag (BFS) provides many advantages compared to conventional concrete, such as high long-term compressive strength, improved durability and economic benefits because of its latent hydraulic property, and low compressive strength at early curing age. This paper investigates the compressive strength of high-activated ground granulated blast furnace slag blended mortar with slag by-product S type(SBP-S). The results of the experiment revealed that incorporating high-activated ground granulated blast furnace slag would affect the compressive strength of mortar. It was found that increasing the Blaine fineness and replacement ratio of slag by-product S type shows high compressive strength of mortar at early curing age because of its high $SiO_2$ and CaO contents in the slag. It is confirmed that an increase of curing age does not affect the compressive strength of mortar made with slag by-product S type at a high curing temperature. Moreover, it is possible to develop and design concrete manufactured with high-activated ground granulated blast furnace slag as binder considering the acceleration curing conditions and mix proportions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2016

In this study, the replacement effects of cementitious materials (fly ash, blast furnace slag, and blended mixtures) were assessed for normal strength concrete with very low shrinkage properties under $350{\mu}{\varepsilon}$ strain using a powder type shrinkage reducing agent. In addition, through mock-up tests of actual size walls restrained with four sides, the shrinkage characteristics using the power type shrinkage reducing agent were measured and the crack reducing ability was assessed. The slump and air contents were measured as the properties of fresh concrete, and the length changes of the prismatic specimens, $100{\times}100{\times}400mm$ in size, were measured for the shrinkage characteristics. To reduce the shrinkage of concrete, the maximum replacing ratio of the fly ash is effective to 20 percent; however, the use of blast furnace slag and ternary mixtures did not reduce the shrinkage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.102-109
• /
• 2011

In this study, in order to develop ultra rapid hardening mortar(URHM) for tunnel repairs using bottom ash of low recycle ratio and Admixture as Eco concept, watertightness and durability properties of URHM on temperature condition of construction field were performed. Test result, seepage quantity and water absorption coefficient regarding watertightness of URHM were as in the following : series II > series I. Seepage quantity for the standard condition were smaller than low temperatures. all specimens were satisfied below 20g as standards of seepage quantity on KS F 4042. Because of the decrease of unit cement content by to replacement of blast furnace slag, the neutrlization resistance for durability properties was reduced. The result of alkali resistance and acide resistance, compressive strengths for specimens soaked in calcium hydroxide solution of seriesI were lower than compressive strengths for specimens not soaked. On the other hand, the case of series II show that the deterioration of compressive strengths for specimens was not almost showed. Compressive strengths of specimens soaked were similar with specimens not soaked except series II-C in $5^{\circ}C$. Therefore, specimens using both blast furnace slag and bottom ash were good in alkali resistance and acide resistance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.370-377
• /
• 2018

Although the frequency of composite resin restoration in children is gradually increasing, there are insufficient researches about the rate of composite resin repair in children. The purpose of this study was to evaluate the repair rate of composite resin restorations in the permanent first molar in children under 12 years old. This study retrospectively analyzed 169 children treated with composite resin restoration in the permanent first molar from May 2014 to April 2015. According to the location of the tooth, the repair rate was higher in the mandible than maxilla and in the left than right. In the classification of restoration, the repair rate was the highest in the class II cavity, and the repair rate was the lowest in the restoration of the occlusal surface only. Repair rate in two years was 14.8%, and repair hazard ratio decreased with age. The most common reason of composite resin restoration replacement was the secondary caries (74.1%). Within the limits of study, the repair rate of children was higher than that of adult due to the characteristics of children. Therefore, dentists should understand these characteristics and try to reduce the repair rate of composite resin composite restorations.