• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.15-16
• /
• 2015

Natural stone causes environmental pollution when it is collected and processed. Also, it is hard to make consistent products. Therefore, this study focuses on the artificial stone with waste porcelain to replace natural stone. The flexural strength and compressive strength are lower according to the replacement ratio of blast furnace slag in the result of experiment.

• Architectural research
• /
• 제12권1호
• /
• pp.49-55
• /
• 2010

Stone powder sludge is a by-product of the manufacturing process of crushed sand. Most of it is dumped with soil in landfills, and the disposal of stone powder sludge causes a major environmental problem. This paper investigates the applicability of stone powder sludge in fly ashbased geopolymer. For this, stone powder sludge was used to replace fly ash at a replacement ratio of 50% and 100% by weight. The compressive strength of the samples was measured and scanning electron microscopy/ energy dispersive spectroscopy (SEM/EDS) analysis and X-ray diffraction (XRD) were performed. The test results indicated that the optimum level of the alkali activator ratio ($Na_2SiO_3$/NaOH) for fly ash-based geopolymer using stone powder sludge was 1.5. The strength development is closely related to the NaOH solution concentration. In addition, the compressive strength of the sample cured at $25^{\circ}C$ was significantly improved between 7 days and 28 days, even though the strength of the sample showed the lowest value at 7 days. Microscopy results indicated that a higher proportion of unreacted fly ash spheres remained in the sample with 5M NaOH, and some pores on the surface of the sample were observed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.115-118
• /
• 2006

Nowadays the using of concrete is generalized, and construction material is demanded to be lightweight according to increasing the height and capacity of buildings. Therefore, it needs to develop the products having the great quality and various performance. Extruding concrete panel made of cement, silica source, and fiber, and it is a good lightweight concrete material in durability and thermostable. The silica of important ingredient is natural material with hish SiO2 contents and difficult in supply because of conservation of environment. On the other hand, the stone powder sludge discharged about 20-30% at making process of crushed fine aggregate and it is wasted. The stone powder sludge is valuable instead of silica ole because the stone powder sludge includes water of about 20-60%, SiO2 of about 64% and it has fine particles. This experiment is on the properties of extruding concrete panel using the stone powder sludge use instead of silica. From this experiment, we find that it is possible to replace the silica as stone power sludge up to 50%,

• Korean Journal of Radiology
• /
• 제2권1호
• /
• pp.14-20
• /
• 2001

Objective: To compare the usefulness of unenhanced spiral CT (UCT) with that of excretory urography (EU) in patients with acute flank pain. Materials and Methods: Thirty patients presenting with acute flank pain underwent both UCT and EU. Both techniques were used to determine the presence, size, and location of urinary stone, and the presence or absence of secondary signs was also evaluated. The existence of ureteral stone was confirmed by its removal or spontaneous passage during follow-up. The absence of a stone was determined on the basis of the clinical and radiological evidence. Results: Twenty-one of the 30 patients had one or more ureteral stones and nine had no stone. CT depicted 22 of 23 calculi in the 21 patients with a stone, and no calculus in all nine without a stone. The sensitivity and specificity of UCT were 96% and 100%, respectively. EU disclosed 14 calculi in the 21 patients with a stone and no calculus in eight of the nine without a stone. UCT and EU demonstrated secondary signs of ureterolithiasis in 15 and 17 patients, respectively. Conclusion: For the evaluation of patients with acute flank pain, UCT is an excellent modality with high sensitivity and specificity. In near future it may replace EU.

• 보존과학회지
• /
• 제27권2호
• /
• pp.211-222
• /
• 2011

익산 미륵사지 석탑은 백제 무왕대(639년)에 기초부가 조성되면서 창건된 것으로 알려져 왔다. 석탑의 주요 부재는 중생대 쥐라기에 생성된 미륵산의 중조립질 회백색 흑운모화강암으로서 조암광물은 석영, 장석, 흑운모, 백운모와 인회석 및 갈염석 등으로 구성되어 있다. 대부분의 부재는 비교적 강한 물성을 가지고 있으나 장기간 풍화를 거치면서 전체적인 내구성은 중간풍화(MW: $883kgf/cm^3$ 정도까지 약화되었다. 이 과정에서 부재의 강도에 영향을 주는 휨, 전단 및 압축력의 저하에 따라 절단(31%), 결실(57%), 균열(44%) 등의 손상이 발생하였다. 원부재는 보존처리를 통해 재사용율을 약 74%까지 높일 수 있으며, 일부 결실과 절단된 부재를 신석재로 성형할 부재가 약 55개 정도이다. 재사용이 거의 불가능한 26%의 외면석과 적심석 일부는 탑의 구조적 안정성을 유지하기 위해 신석재로의 대체가 불가피하다. 따라서 익산지역의 채석장을 중심으로 석탑과 동일한 암석을 탐색한 결과, 황등지역의 석재가 미륵사지 석탑의 원부재와 가장 유사하고 안정적인 물성을 보였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.126-127
• /
• 2020

Recently, as interest in environmental issues increases, minimizing carbon dioxide generated during cement manufacturing is a problem to be solved. In order to solve such a problem, it is required to use an industrial by-product of recycled aggregate, blast furnace slag, and circulating fluidized bed boiler fly ash to replace it on the basis of geopolymer(=cementless). This study examines the characteristics of eco-friendly artificial stone according to the mixing ratio of geopolymer-based recycled aggregate. As a result of the experiment, when the addition rate of the alkali stimulant was 15% and the mixing ratio of the circulating aggregate was 70%, the flexural strength and compressive strength were the highest. Density and water absorption decreased as density of circulating aggregates increased and water absorption increased. However, when the mixing ratio of the circulating aggregate exceeded 70%, the flexural strength and compressive strength decreased. Therefore, in order to obtain strengths meeting the KS standards, the mixing ratio of recycled aggregate was set to 70%, and artificial stone was manufactured using industrial by-products.

• 한국지반환경공학회 논문집
• /
• 제17권3호
• /
• pp.5-12
• /
• 2016

쇄석말뚝공법은 비교적 강성이 크고 압축성이 작은 쇄석을 연약한 점성토 지반 및 느슨한 사질토 지반에 치환 후 다져 시공함으로써 연약한 지반의 지지력 증가와 침하량 감소, 압밀배수에 의한 지반개량 효과에 더불어 사질토 지반에서는 지진 발생시 액상화 방지에 효과적인 공법이다. 쇄석말뚝공법은 여러 토목분야에서 활용되고 국제적으로 상당히 많은 시공실적을 보이고 있으나, 아직까지 정형화된 침하량 산정방법은 없다. 따라서 본 연구에서는 쇄석말뚝공법의 합리적인 침하량을 예측하기 위하여 기존에 제안되어 사용되고 있는 침하량 이론식들을 비교 분석하여 적용성을 평가하였다. 그 결과 Hook's law 식이 수치해석과 가장 근접하는 것으로 확인되었다.

• 농업과학연구
• /
• 제47권3호
• /
• pp.485-496
• /
• 2020

Recent changes in the disaster environment have greatly increased the possibility of internal erosion in deteriorated reservoirs; thus, countermeasure methods are required to enhance the drainage performance of embankments. Sand filters have been mainly used to prevent internal erosion; however, due to the sand depletion and environmental problems, new alternative materials are required to replace the sand in the filter zone. In this study, crushed stone was used instead of sand as a material that could satisfy permeability, material supply, demanding conditions, and economic efficiency. Although crushed stone has excellent drainage performance, it has a clogging phenomenon due to its high permeability. Accordingly, the materials need to be separated with a geotextile wrapping method. Additionally, the 3D numerical analysis and a large model experiment were conducted to evaluate the seepage characteristics and in-site application of the crushed stone filter. As a result, the crushed stone filter showed an excellent dispersion effect by reducing the pore water pressure by about 9.5 times that of the sand filter. In addition, it was shown that the safety factor for piping increased significantly by reducing internal erosion. When comparing the economics and supply and demand conditions of the material, crushed stone was evaluated as an effective method to reduce the internal erosion of embankments at deteriorated reservoirs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.81.1-81
• /
• 2002

$\textbullet$ This paper presents a study on the development of a walking robot for an armor-stone work of the breakwater construction. The armor-stone work is putting stones about 0.3 ∼ 2m3 on the surface of the breakwater to prevent it from waving. $\textbullet$ This work has been done manually, and its process plan is uncertain by effects of the weather, wave and tide of sea. Therefore the constructional cost is considered to be wasteful $\textbullet$ Working in underwater as well as on land for human workers causes the accident and caisson disease, so it is necessary to replace the process to be mechanized. $\textbullet$ The basic requirements of the robot for mechanizing are as follows : 1) To have a large...

• 한국콘텐츠학회논문지
• /
• 제12권10호
• /
• pp.357-364
• /
• 2012

치과용 스캐너를 기반으로 하는 디지털 모형은 기존의 전통적인 석고모형을 대체할 만큼 발전되고 있다. 본 연구의 목적은 디지털모형의 정확도와 신뢰도를 평가하고자 하였다. 상악의 전악모형을 주 모형으로 설정하여 주 모형으로부터 석고모형을 제작하였고(N=10), 치과용 백색광 스캐너를 이용하여 10개의 디지털모형 데이터를 채득하였다. 제작된 두 실험군(석고모형, 디지털모형)을 1명의 검사자가 2회에 걸쳐서 6곳의 계측지점을 측정하였다. 짝 표본 t-검정과 급내 상관계수을 이용하여 통계적인 분석을 하였다. 실험결과 측정값의 검사자 내 신뢰도는 급내 상관계수 결과 두 실험군 0.75에서 0.87의 범위를 보였다. 석고모형과 디지털 모형의 평균 오차값은 0.11mm에서 0.23mm의 범위를 나타내었고, 모든 계측지점에서 통계적으로 유의한 차이를 보였다(P<0.05). 본 실험결과 모든 계측지점에서 적정수준의 정확성은 확보되지 않았으나, 선행연구에 비추어 볼 때 임상적인 효용성은 검증되었다. 추가적으로 임상적인 사례를 통해 평가되어야 할 것으로 사료된다.