• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.515-520
• /
• 2003

Characteristics of an amplifier with repetition rate of a few KHz is investigated. The continuous flash lamp pumped Nd:YAG laser head is used as an amplifier. The thermally induced birefringence of the laser medium is compensated and the depolarization is reduced to 5% in a double-pass amplifier. The amplification factor of a four pass amplifier reaches to about 3.2 at the repetition rate 5-10 KHz and the pulse width is lengthened from 40 ns to 48 ns.

• MALSORI
• /
• no.67
• /
• pp.61-77
• /
• 2008

The purpose of this study is to blow the characteristics of disfluency in childhood. The subjects were 144 normal children at the age of between 3 to 8 years who lived in Seoul. All the subjects provided spontaneous conversational speech samples during free-play interactions with their friends. We investigated the patterns and the frequency of disfluency and its relevance with subject's age, speaking rate and MLU(mean length of utterance). The results of this study can be summarized as follows. (1) There was no difference in the frequency of disfluency with the speaker's age or speaking rate. (2) Interjection was the most frequently occurring pattern of disfluency. (3) Prolongation, revision, interjection increased with age while part-word repetition, single-syllable word repetition, multi-syllable word repetition decreased gradually. (4) A significant effect of MLU on the frequency of disfluencies were demonstrated. The regression analysis has shown that more disfluencies occurred in utterances of children whose MLU is longer.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1696-1698
• /
• 1998

Pulsed Nd:YAG laser using Nd:YAG crystal operates stably in the thermal conductivity, mechanical, optical condition. That is used broadly in material processings because of easy reaction to the materials, and the maintenance is very easy because of lamp excitation. In these material processings, power dinsity control is very important to improve processing technology. Power density is controled by inductance and capacitance or repetition rate. Therefore we are going to control laser power density as One-Chip Microprocessor(PIC16C55) and 8051. We have been experimented at the pulse repetition rate range of 10pps to 60pps(pulse per second).

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.611-615
• /
• 2014

We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1055-1059
• /
• 1998

The correlation between the propagation of electrical tree and distributions of partial discharge(PD) pulses accompanying with electrical tree of bush type in low density polyethylene were discussed. We measured the growth of electrical tree by using optical microscope and PD data simultaneously. The PD data detected and analyzed were PD magnitude, repetition rate, average discharge power, average phase angle, and $\psi$-q-n distribution pattern. The average discharge power and repetition rate of PD had good linear relation with area of tree. Repetition rate and peak discharge magnitude and width of discharge phase angle increased with the tree.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.12 no.1
• /
• pp.55-60
• /
• 2001

Background and Objectives : Syllable Maximum Repetition Rate(MRR) is ability to repeat rapidly the articulators and is assessed for oromechanism function as one of the MPT. MRR is measured by rate(counts/sec), also simultaneously considered accuracy and consistency. The objective of the present was to examine stimuli effects and age and sex differences for MRR. Materials and Method : This study was participated 60 normal males and females(1 : 1) who were divided into two groups young(<40 years old) and old($\geq$40 years old). Stimuli were $/{P^=}a/,/{t^=}a/,/{k^=}a/,/{P^h}a/,/{t^h}a/,/{k^h}a/,/{P^=}{at^=}{ak^=}a/$ for, manner(tense and aspirated) of articulation, $/{p^h}{at^h}{ak^h}a/,/{t^h}{ap^h}{ak^h}a/$ for the effect of the order of syllable, glide /u-i/ for coordination of lip and tongue, interrupted vowel /i/ for laryngeal function. Results : There were little differences in two age groups and sex and manner of articulation for MRR tasks. The fastest average MRR of the single syllable included in this study was $/{t^=}a/$. significant differences existed between MRR for ${p^h}{at^h}{ak^h}a/ and /{t^h}{ap^h}{ak^h}a/$, which suggested that MRR was affected by the order of the syllables. MRR for interrupted vowel /i/ was about 2 counts/sec slower than average rate of 1 syllables. Conclusion : From these results, the order of the syllables was a crucial variable in MRR. rather than age or sex. There were no difference age, sex and manner of rate. The interrupted vowel repetition rate was slightly slow used and can provide basic information to assess the speech mechanism and can be useful to develop effective stimuli to differentiate the disordered group from normal.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.32-44
• /
• 2001

The purpose of this study was to investigate the effects of Er : YAG laser on cutting efficacy and temperature changes of dentin. We used the dentin specimens of human premolars and molars which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er : YAG laser with non-contact handpiece type delivery system under different treatment condition of irradiation energy, pulse repetition rate, and exposure time. Two procedures were conducted by the presence of water flow during lasing. The specimens were grouped by thickness of dentin. We investigated the cavity pattern, volume, and temperature change of dentin specimen to determine the cutting efficacy and temperature rise of Er : YAG laser, and obtained following results. 1. Cutting volume of dentin was increased by increasing the irradiation energy, pulse repetition rate, and exposure time(P<0.05). 2. Margins of abulated cavities were sharp and clean and floors of cavities were conical in shape and showing smooth surfaces. Upper diameter of abulated cavities were increasing as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased. A few cracks were observed on abulated surfaces under treatment condition of laser parameter with 150mJ, 5Hz, and 5sec. 3. Temperature was increased as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased, and temperature rise was decreased as dentin thickness was increased(P<0.05). 4. Temperature rise was decreased under water flow compared with no water flow during laser exposure(P<0.05). From these results, we think that the method of using a Er:YAG laser would be effective and safe in cutting dentin for clinical application.

• Laser Solutions
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2013

Picosecond lasers are a very effective tool for micromachining metals, especially when high accuracy, high surface roughness and no heat affected zone are required. However, low productivity has been a limit to broadening the spectrum of their industrial applications. Recently it was reported that in the micromachining of copper with a 1064nm picosecond laser, there exist the optimal pulse energy and repetition rate to achieve the maximum volume ablation rate. In this paper, we used a 515nm picosecond laser, which is more efficient for micromachining copper in terms of laser energy absorption, to obtain its optimal pulse energy and repetition rate. Theoretical analysis based on the experimental data on copper ablation showed that using a 515nm picosecond laser instead of a 1064nm picosecond laser is more favorable in that the calculated threshold fluence is 75% lower and optical penetration depth is 50% deeper.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.415-416
• /
• 2008

We demonstrate a simple method to multiply the repetition rate of an optical pulse train by a fiber Fabry-Parot interferometer (FFPI) spectral filtering. A stable 40 GHz pulse train at 1550 nm is successfully generated by removing unwanted spectral components of a 10 GHz actively mode-locked laser source by passing a high finesse FFPI.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.19-26
• /
• 2008

We propose a selective detection scheme based on pulse repetition considering the BER (Bit Error Rate) performance and complexity of coherent IR-UWB (Impulse Radio-Ultra Wide Band) systems. To take system complexity into account, the proposed scheme transmits the UWB signals by pulse repetition at the transmitter, like conventional PRC (Pulse Repetition Coding). However, to effectively improve BER performance of the system, the proposed scheme performs selective detection by estimating the SNR (Signal-to-Noise Ratio) of the received pulse-repeated signal at the UWB receiver. Hence, the proposed scheme effectively improves BER performance of the coherent IR-UWB systems without increasing system complexity, as compared to the conventional PRC algorithm.