• 제목/요약/키워드: Repetition Cycle

검색결과 49건 처리시간 0.024초

레이저를 이용한 하지정맥류 치료의 정량화 연구 (Quantitative Evaluation on Laser Performance for Endovenous Photocoagulation)

  • 안민우;;오정환;강현욱
    • 대한의용생체공학회:의공학회지
    • /
    • 제35권3호
    • /
    • pp.62-67
    • /
    • 2014
  • The purpose of the study was to identify the effect of laser parameters on photocoagulation to maximize safety and efficacy during varicose vein treatment. CW and pulsed modes at 1470 nm were initially compared as a function of power on bovine liver tissue. In the pulsed mode, various parameters including repetition rate, duty cycle, and irradiation time were compared to evaluate tissue response during thermal treatment. The results demonstrated that CW and pulsed modes yielded almost similar coagulation development possibly due to shorter irradiation time of 5 sec. Regardless of laser mode, both repetition rate and duty cycle presented constant coagulation rate whereas longer irradiation time facilitated coagulation process.

TV 유리의 반복 성형공정에서 3차원 금형 열사이클 해석 (Three Dimensional Thermal Cycle Analysis of Mold in Repeated Forming Process of TV Glass)

  • 황정해;최주호;김준범
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.192-198
    • /
    • 2000
  • Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.

  • PDF

SBR공정의 무산소-호기 구간반복에 따른 영양염류 제거 특성 (Characteristics of Nutrient Removal with Variation of the Anoxic-Oxic Phase Repetition in Sequencing Batch Reactor Process)

  • 이재근;임수빈
    • 한국지반환경공학회 논문집
    • /
    • 제10권1호
    • /
    • pp.43-48
    • /
    • 2009
  • 본 연구에서는 소규모 처리공법으로서 질소와 인을 효율적으로 제거할 수 있으며, 관리 및 운전이 용이한 연속회분식반응조(SBR)공정의 영양염류 제거특성에 대하여 연구하였다. 특히, 질소의 탈질 및 인의 과잉섭취에 영향을 미치는, 무산소구간의 반복횟수에 따라 변화하는 용존산소, COD, 질소 및 인의 반응특성을 파악하여 SBR공정의 무산소-호기 구간반복에 따른 운전특성을 파악하고자 하였다. 이에 호기-무산소구간을 1~4회 반복하여 Run 1~4의 실험을 수행한 결과, 무산소구간의 반복횟수가 많아질수록 탈질을 위한 낮은 용존산소 유지가 어려운 것으로 나타났다. COD 제거율의 경우 운전에 상관없이 모두 91% 이상의 양호한 결과를 나타냈으나, 추가적인 무산소구간이 없을 때 효율이 약간 더 우수하였다. 질소제거에 있어서는 무산소구간이 2회 및 3회 반복되었을 때 약 68%의 높은 제거율을 나타냈으며, 배출되는 질소의 구성은 99% 이상이 $NOX^--N$ 이었다. 인 제거에 있어서는 무산소구간이 1회~3회 반복되었을 때 약 40%의 양호한 제거효율을 나타냈다.

  • PDF

유방향그래프에서의 순환 검출 알고리즘 (A Cycle Detection Algorithm in Directed Graphs)

  • 이우기;이정훈;박상언;김능회
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
    • /
    • pp.172-178
    • /
    • 2005
  • 순환탐색 알고리즘 및 스택기반 알고리즘 등은 유방향그래프에서 순환과 순환경로를 발견하는 특정 정점으로부터 출발하여 연결된 그래프에서 순환을 탐색하는 것이다. 기존 연구의 단점은 모든 순환을 다 찾아내지지 못하는 경우라든지, 동일한 순환을 중복해서 찾아내는 문제가 있었다. 본 연구에서 제시하는 정점제거 순환탐색 알고리즘은 특정 정점의 순환을 발견한 뒤 그 정점을 삭제하므로 중복된 순환을 발견하지 않고 모든 순환을 찾을 수 있다. 또한 순환을 발견했을 때, 순환경로를 출력하는데 있어서 스택의 인덱스를 이용해, 저장경로를 탐색하지 않고 출력하는 방법을 제안하였다. 실험에서는 임의의 정점과 간선을 생성하여 그래프로 만들고, 각 알고리즘에 따른 모든 정점을 찾을 수 있는지, 그래프 상황에 따라 어떠한 장단점이 있는지, 간선이 많아질수록 인덱스 순환탐색 알고리즘보다 탐색시간이 얼마나 차이를 보이는지를 확인하였다. 웹 구조처럼 일정한 크기의 웹페이지와 많은 수의 링크가 존재하는 그래프에서 정점제거 순환탐색 알고리즘이 순환을 찾는데 적합하다는 것을 입증했다.

  • PDF

Illumination Control of LEDs in Visible Light Communication Using Manchester Code Transmission

  • Lee, Seong-Ho
    • 센서학회지
    • /
    • 제25권5호
    • /
    • pp.303-309
    • /
    • 2016
  • In this paper, we introduce a new method for controlling the illumination of LEDs in visible light communication (VLC) by changing the duty cycle of Manchester code. When VLC data were transmitted in Manchester code, the average optical power of the LEDs was proportional to the duty cycle. In experiments, we controlled the illumination of a $3{\times}3$ LED array from 10% to 90% of its peak value by changing the duty cycle of the Manchester code. The synchronizing clocks required for encoding and decoding the Manchester code were supplied by pulse generators that were connected to a 220 V power line. All pulse generators made the same pulses with a repetition frequency of 120 Hz, and they were synchronized with the full-wave rectified voltage of the power line. This scheme is a very simple and useful method for constructing indoor wireless sensor networks using LED light.

Bluetooth Low Energy 환경에서 에너지 효율을 위한 Nack 기반 Broadcast 전송 기법 연구 (An Energy-Efficient Broadcast Method based on Nack Mechanism for Bluetooth Low Energy Environment)

  • 정연성;손봉기;이재호
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2015년도 추계학술발표대회
    • /
    • pp.457-459
    • /
    • 2015
  • Bluetooth Low Energy 기술은 IoT 환경의 개인 영역 통신 시스템의 발달과 함께 저전력 근거리 통신 기술의 대표되는 기술로써 현재까지 에너지 효율을 우선시하여 개발되어 왔다. 하지만 홈 네트워크 환경이나 공공지역에서 서비스되는 음성안내 등의 환경에서 Bluetooth Low Energy 기술이 적용될 경우 Broadcast 형태의 음성 데이터 전달이 요구될 수 있으며, 이 경우 Bluetooth Low Energy를 포함한 대부분의 저전력 근거리 통신 기술에서는 Duty Cycle 등의 에너지 고효율 정책으로 인하여 Broadcast 데이터 수신에 대한 신뢰성이 보장되기 힘들기 때문에, 보편적으로 n-repetition 방식의 데이터 전달 방식을 적용하고 있다. 본 고에서는 이러한 n-repetition 방식의 데이터 전달에 대한 중복 송신에서 발생되는 에너지 소모를 개선시키고자 Nack 기반의 선택적 재전송 형태의 새로운 Broadcast 기법을 제안하며, 실험을 통하여 이에 대한 효율성을 검증하였다.

LOW CYCLE THERMAL FATIGUE OF THE ENGINE EXHAUST MANIFOLD

  • Choi, B.L.;Chang, H.;Park, K.H.
    • International Journal of Automotive Technology
    • /
    • 제5권4호
    • /
    • pp.297-302
    • /
    • 2004
  • This paper presents the low cycle thermal fatigue of the engine exhaust manifold subject to thermo-mechanical cyclic loading. As a failure of the exhaust manifold is mainly caused by geometric constraints of the less expanded inlet flange and cylinder head, the analysis is based on the exhaust system model with three-dimensional temperature distribution and temperature dependent material properties. The result show that large compressive plastic deformations are generated at an elevated temperature of the exhaust manifold and tensile stresses are remained in several critical zones at a cold condition. From the repetition of these thermal shock cycles, maximum plastic strain range (0.454%) could be estimated by the stabilized stress-strain hysteresis loops. It is used to predict the low cycle thermal fatigue life of the exhaust manifold for the thermal shock test.

실내동결시험을 통한 열류량 분석에 따른 동결-융해 조건 분석 및 한랭지역의 분류 (Classification of cold regions and analysis of the freeze-thaw repetition cycle based on heat transfer quantity by freezing test)

  • 안재욱;서정은;정민형;성주현
    • 한국터널지하공간학회 논문집
    • /
    • 제20권6호
    • /
    • pp.957-972
    • /
    • 2018
  • 한랭지역에 건설된 터널은 내 외부의 온도변화에 의해 갱구부 또는 환기구와 같이 특정한 구간에서 외부 온도변화의 영향으로 균열, 누수 등을 비롯한 심각한 결함이 발생할 수 있다. 이러한 동결-융해로 인한 터널의 결함을 방지하기 위해서는 동결 피해가 우려되는 구간에 대해서 적절한 동결 피해 방지 대책을 적용하여야 하지만 동결-융해 조건을 판단하는 구체적인 기준은 제시되어 있지 않다. 본 연구에서는 국내 터널의 정밀안전진단 결과를 통해 강원지역의 동결피해 현황을 분석하였으며 향후 한랭지역 터널의 동결피해 저감을 위한 설계 및 유지관리에 활용할 수 있도록 동결-융해 반복일수(F) 조건에 따른 국내 동결피해 가능지역을 분류하고자 한다. 따라서 한랭지역 터널의 동결피해 사례분석과 국내 외 동해환경 평가기준을 바탕으로 콘크리트 시험체의 온도변화에 대한 실내실험을 실시하였으며 실험적 검토결과를 기반으로 시간 및 온도변화에 따른 열류량(W) 분석을 실시하였다. 최종적으로 열류량(W) 분석결과와 국내의 기후특성을 고려하여 동결-융해 반복일(F)에 대한 조건을 제안하였으며, 동절기 동결피해에 대비하여 효율적인 설계 및 유지관리에 활용할 수 있도록 국내 한랭지역을 분류하였다.

한국 노인의 허약 경험: Colaizzi의 현상학적 방법으로 (Experience of Frailty in Korean Elderly: A Phenomenological Study Utilizing the Colaizzi Method)

  • 박진경
    • 대한간호학회지
    • /
    • 제47권4호
    • /
    • pp.562-574
    • /
    • 2017
  • Purpose: This study attempts to explore the subjective experience of frailty among elderly individuals in Korea. Methods: From June to August in 2014, 11 elderly persons who had experienced frailty in a community were interviewed. For data analysis, the method suggested by Colaizzi was applied as a phenomenological method. Results: According to the analysis, the study participants' frailty process was structured in seven categories: (a) 'natural phenomenon with ageing,' (b) 'life force comes to an end,' (c) 'the light in my heart turns off,' (d) 'unavoidable situation,' (e) 'continuous and connected vicious cycle,' (f) 'the limit of recovery energy already passes,' and (g) 'life is supported by someone's help.' Conclusion: The frailty experience in the participants is a natural process of aging, which cause vicious cycle acting with each other among physical, psychological, and social health. It is said that the cycle of frailty was started from weight loss and insufficient sleep, and boostered by pain. The participants from repetition of the vicious cycle become exhausted and pass the threshold of their recovery energy at some points. If they meet with sudden accidents such as falling, traffic accident and so on, they become to live a dependent life supported by someone's help in a moment. To prevent frailty and worsening conditions in Korean elderly individuals, it is recommended to provide a interventional programs using this study's results.