• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.1-6
• /
• 1998

It is important in the durable water and oil repellent finishing for wool fabric what kinds of water-repellent agents will be used. Water repellent agents and its concentration were aleady chosen in the previous paper, one of the crosslinking agents which has less damages(harsh handle or yellowing) to the treated fabrics was a low molecular weight urethane-based resins(eg. Elastron BN-11). In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and crosslinking agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency and durability to dry-cleaning was as follows ： Fabrics are padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $1g/\ell$ of crosslinking agents, and 40g/s of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 1 minute. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings were observed. For enhancing the durability to dry-cleaning, the role of crosslinking agents was important for they bonds water-repellent agents and fibers to 3-dimensional net structure. Therefore, the most suitable drying and curing conditions should be selected according to the kinds of crosslinking agents.

• 공업화학
• /
• 제26권5호
• /
• pp.549-556
• /
• 2015

한약재에서 추출한 해충기피용액과 실리카를 혼합하여 해충기피 실리카 졸을 제조하고, 분무건조법을 이용하여 마이크로 단위의 해충기피용액이 포함된 다공성 구형 분말을 제조하였다. 분무건조법을 통해 제조된 해충기피 분말의 특성분석을 위해 해충기피 졸의 농도(해충기피용액, 실리카) 및 분무 건조 장비의 조건에 따라 분말 모폴로지, 입자크기별 입경분포, 열적 안정성 분석을 실시하였다. 해충기피 졸의 농도가 4, 7 wt% 및 10 wt%일 때 각각 평균 입자 크기가 8.3, $9.5{\mu}m$ 및 $11.7{\mu}m$ 순으로 농도가 증가할수록 분말의 직경이 커졌다. 반면에 빠른 가스 주입속도 상태에서 노즐입구온도 및 용액주입속도 증가에 의한 분말 입경의 증가는 미미하였다. 또한, 열중량 분석법을 통하여, 구형의 다공성 분말 안에 해충기피 용액이 담지 되어있고, 이들은 $200^{\circ}C$까지 열적 안정성이 확보됨을 확인하였다. 분무건조를 통한 해충기피 분말은 평균 $9{\sim}10{\mu}m$이고, 열적 안정성을 가지므로 컴파운딩 및 필름제조공정에 응용이 가능할 것으로 기대된다.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.55-61
• /
• 2017

A non-fluorinated polystearyl methacrylate water repellent was synthesized by emulsion polymerization. The number and weight averaged molecular weights were obtained at around 137,277 and 237,754g/mole. The melting point was observed at $32^{\circ}C$. The contact angle of water droplet on fabrics treated with the water repellent was $140{\sim}145^{\circ}$ for cotton and polyester, and $125{\sim}130^{\circ}$ for wool and nylon. Since the critical surface tension was estimated at 20.7mN/m, even though relatively not so strong as fluorinated water repellent, it is considered to be used as a good water repellent practically.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.96-97
• /
• 2020

In this study, the compressive strength and porosity characteristics of cement mortar mixed with liquid and powder composite water repellent were evaluated. When the liquid water repellent was mixed, the compressive strength at 28 days of age was 42% compared to OPC, and the compressive strength was greatly reduced. However, the 28-day compressive strength of the powder water repellent mixture and P5L1, P6L1 liquid and powder composite water repellent was about 97% compared to OPC, and there was little decrease in compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.88-89
• /
• 2020

Research is underway to incorporate water-repellent agents inside mortars to improve the durability of concrete. Therefore, in this study, the mechanical properties and absorption rate were evaluated by adding a hybrid water repellent in which a liquid and a solid were mixed at a constant ratio.As a result of the experiment, the compressive strength of the mortar added with the hybrid water repellent showed a strength reduction of about 5% than the compressive strength of the OPC, and the overall water absorption was lower than that of the water repellent used alone.

• 한국포장학회지
• /
• 제27권1호
• /
• pp.9-16
• /
• 2021

The present study was conducted to accomplish management efficiency by preparing preemptive measures for consumer dissatisfaction and overcome risks caused by Global Warming through studies of model cases in packaging. Through this study, we made it possible to find a way for companies to prepare for Global warming and consumer dissatisfaction. By contributing to eco-friendly packaging, we are trying to preemptively respond to recent major issues through packaging. Through this experiment, we tried to measure the degree of penetration of Plodia interpunctella H. larva into the insect repellent film produced by printing Ink containing a natural repellent. The control experiment was conducted with an untreated LDPE film to which no insect repellent was applied. The numbers decreased from 17 to 7 when the film was processed with repellent to show experimental results verifying effects of repellent by decrease in 10 (58.8% Decrease). Such results show that it is safe when the film is unfolded but in the case where the film is folded, the Plodia interpunctella H. punches through the film to lead to consumer dissatisfaction and it suggests that this can bring on risks to corporate management. Considering that most of the film is folded in the case of PE bag packaging, the direction which the corporations should take in terms of preparing for climate change countermeasures and consumer dissatisfaction has been clarified. Due to it receiving satisfactory results in safety rest results for printing film applied with pest repellent as well as the Quality analysis to test repellent contents of repellent film, it is certain that the importance of repellent method in packaging will increase in preparing for consumer dissatisfaction and actions against climate change henceforth.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.115-124
• /
• 1997

In this study, Water Repellent Finish was carried out before dyeing on cotton fabrics. It was aimed to improve on dyeing properties of cotton fabrics with direct dye. The results obtained were summerized as follows: 1. The K/S value of water repellent finished cotton fabrics increased. This phenomena in water repellent finished cotton fabrics were much more noticiable than unfinished cotton fabrics. 2. The color fastness(light, washing, and rubbing) of water repellent finished cotton-dyed were worse than those of unfinished cotton-dyed with direct dye. △E of water repellent finished cotton fabrics wasn't showed significant difference as compared with that of unfinished cotton fabrics. 3. The water repellency of finished cotton after dyeing got down from 100 to 70. That of finished-cotton before dyeing was 100. 4. Moisture regain, stiffness and weight of finished cotton fabrics were not almost differenciated with unfinished cotton fabrics. Moreover, the tensile strength of finished cotton fabrics was increased compared to that of unfinished cotton fabrics. As conclusion, according to the above results when the cotton fabrics were dyed with direct dye, it was much more effective that water repellent finished cotton fabrics were dyed rather than trational process, that is pre-dyeing after-finishing even if, by low liquor ratio. The physical properties of fabrics were maintained or increased.

• 한국동물위생학회지
• /
• 제32권1호
• /
• pp.87-92
• /
• 2009

The avoidance of the allergen of the house dust mite is one of the challenges to reduce and treat the symptoms of allergic diseases. Accordingly, various acaricidal agents are being used to kill the mite, but just killing it leaves the remains of it, which still act as the allergen. Therefore expelling the mite is thought as best policy to avoid the mite allergen. For this, some materials have been applied to repellent agents against the mite. Among them, a material with natural origin, known as the phytoncide, is being used for its repellent activity, as well as for its benefits for health. In this experiment, essential oils extracted from Korean white pine (Pinus koreaiensis S. et Z.) and hinoki cypress (Chamaecyparis obtusa), which are widely used as the source of phytoncide products, are studied for demonstration of the repellent effect against the house dust mites, Dermatophagoides farinae and D. pteronyssinus. Direct contact method was used to evaluate the repellent effect (%). And the results suggest the oils have a significant effect enough to be used as a source of repellent agent. For the repellent effect, the most effective concentration was $0.5{\mu}l/cm^2$ at 45 minutes both in the white pine and the hinoki oil.

• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.182-187
• /
• 2024

Currently, the most developed new energy source is solar energy. Because solar power is installed outside, it is exposed to many pollutants. Pollutants are causing the characteristics of solar energy to deteriorate. Therefore, this study aims to develop a water-repellent coating to prevent contamination of solar modules. Silica and Titania materials are mainly used as water-repellent coating materials. In this study, it was based on silica and the contact angle characteristics were measured according to the change in the amount of silica and ammonia water added and the number of coatings. As a result of the measurement, it was confirmed that the contact angle was more than 60 degrees when 0.5 mol of TEOS was added to 50 mL and 0.15 M when 1 mL of ammonia water was added to 296.47 ml of distilled water. And it was confirmed that the contact angle improved when the number of coatings was applied twice. A water-repellent coating material was applied to low iron tempered glass used to protect dye-sensitized solar cell modules. The characteristics of the module were measured after spraying DI-Water on low-emission tempered glass with a water-repellent coating. As a result of the measurement, the efficiency of the module without application, the efficiency of the module coated once, and the module coated twice were 4.87%, 4.90%, and 4.91%, respectively. It was confirmed that the efficiency of the module increased by applying water-repellent coating. As a result of this study, it is determined that the water-repellent coating material will help improve solar power generation efficiency and lifespan by being self-cleaning and non-reflective.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.102-108
• /
• 2015

Agricultural cultivation papers treated with water repellent were investigated in order to analyse mechanical properties and durability. The water repellency was optimal when papers are treated with Wb and Sa water repellents. Also, WCPs with 5% water repellent were more effective than those of 3 and 10%. In addition, water repellency of WCPs with Wb and Sa water repellents were kept constant in correlation with aging time. Finally, WCP with Wb water repellent possesses efficiency in terms of mechanical properties and durability.