• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.3
• /
• pp.63-72
• /
• 1991

To investigate the status of repeated use of irrigation water observations of irrigation water were made on dry days during the irrigation periods in 1986 and 1987 crop year. The total area of studied site is 1,441 ha. The site is a major portion of Jedaecheon basin which is located in Bubuk-myeon, Miryang-gun, Gyeongnam Province. The studied area was subdivided into six small blocks. The inflow and outflow of daily irrigation water for these subdivided blocks were checked. Obtained results are as follows : 1. The over all possible ratio of the repeated use of irrigation water in studied area was 48.3%, which means that approximately one half of the surface flow was possible to be repeatedly used as irrigation water in this area. 2. The ratio of repeated use of irrigation water in sloppy paddy area was 4.29%, whereas, the ratio was 21.97% in the plain area. The average figure of this ratio over studied area was estimated as 17.43%.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.206-224
• /
• 2013

The purpose of this study was to examine the formation of customer's repeated use that is real long-term commitment in franchise/chain coffee shops. 457 effective samples were analyzed using PASW 18.0 and AMOS 18.0. The results of the analysis of the relationships between user experience, customer satisfaction, customer commitment and repeated use are as follows. First, it was presented that atmosphere, price fairness and coffee product quality had a positive impact on customer satisfaction. Second, customer satisfaction had a positive impact on customer commitment and repeated use. Finally, there was the mediating effect of continuous commitment between customer satisfaction and repeated use. Based on the results of the above analysis, the managerial implications for increasing repeated use of coffee shops are as follows. First, the strategy for enhancing performance of user experience is to try to improve atmosphere(facilities, ambient/lighting), price fairness, coffee product quality(taste, flavor, temperature). Second, the strategy for forming repeated use is to enhance customer commitment(affective commitment, continuous/normative commitment).

• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.136-143
• /
• 2021

Purpose. This study aimed to evaluate the effect of repeated use of an implant handpiece under an implant placement torque (35 Ncm) and overloading torque condition (50 Ncm) on an output torque. Materials and Methods. Two types of implant handpiece systems (Surgicpro/X-DSG20L [NSK, Kanuma, Japan] and SIP20/CRB46LN [SAESHIN, Daegu, South Korea]) were used. The output torque was measured using a digital torque gauge. The height and angle (x, y, and z axes) of the digital torque gauge and implant handpiece were adjusted through a jig for passive connection. The experiment was conducted under the setting torque value of 35 Ncm (implant placement torque) and 50 Ncm (overloading torque condition) and 30 times per set; a total of 5 sets were performed (N = 150). For statistical analysis, the difference between the groups was analyzed using the Mann-Whitney U test and the Friedman test was used to confirm the change in output torque (α=.05). Results. NSK and SAESHIN implant handpieces showed significant differences in output torque results at the setting torques of 35 Ncm and 50 Ncm (P<.001). The type of implant handpiece and repeated use influenced the output torque (P<.001). Conclusion. There may be a difference between the setting torque and actual output torque due to repeated use, and the implant handpiece should be managed and repaired during long-term use. In addition, for successful implant results in dental clinics, the output torque of the implant handpiece system should be checked before implant placement.

• Journal of the Korean Statistical Society
• /
• v.36 no.3
• /
• pp.411-421
• /
• 2007

The recent work by the authors (see, Withers, 1999; Withers and McGavin, 2006; Withers and Nadarajah, 2006) provided new expressions for repeated upper tail integrals of the univariate normal density and so also for the general Hermite function. Here we derive new expressions for repeated lower tail integrals of the same. The calculations involve the use of Moran's L-function and the Airy function. In particular, the Hermite functions are expressed in terms of Moran's L-function and vice versa.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.8-13
• /
• 2016

Purpose: The aim of this study was to compare the accuracy of two different styles of mechanical implant torque wrenches before and after sterilization and repeated use. Materials and methods: Thirty new spring-style and friction-style mechanical implant torque wrenches from five different manufacturers were selected as subjects of study and assessed in terms of accuracy. Three manufacturers produced, spring-style (Dio, Neobiotech, Osstem) torque wrenches, and other three manufactures produced friction-style (Dentium, Osstem, Shinhung) torque wrenches. The procedure of target torque measurement was performed 10 times for each device and a digital torque gauge (MGT-12, Mark-10 Corp, USA) was used to record the measurements. All torque wrenches were used repeatedly for 20 times and then sterilized. This whole procedure was repeated 100 times and all torque wrenches were retested. The collected data was analyzed using a SPSS Statistics Analysis program to evaluate the accuracy of the torque wrenches and Mann-Whitney-U test was used for a comparative analysis. Results: After sterilization and repeated use procedure, results did not show any significant difference between error values in the spring-style torque wrench group. However, the results demonstrated an increase in error values within the friction-style torque wrench group (P<.05). Conclusion: There was no difference between the accuracy of new spring-style torque wrenches before and after 100 cycles of sterilization and repeated use (P>.05). There was significant difference between the accuracy of new friction-style torque wrenches before and after 100 cycles of sterilization and repeated use (P<.05). Within the limitation of this study, spring-style torque wrenches were more accurate than friction-style torque wrenches in delivering target torque values.

• Journal of Chest Surgery
• /
• v.40 no.12
• /
• pp.817-824
• /
• 2007

Background: There are two choices for heart valve replacement-the use of a tissue valve and the use of a mechanical valve. Using a tissue valve, additional surgery will be problematic due to valve degeneration. If the risk of additional surgery could be reduced, the tissue valve could be more widely used. Therefore, we analyzed the risk factors and mortality of patients undergoing repeated heart valve replacement and primary replacement. Material and Method: We analyzed 25 consecutive patients who underwent repeated heart valve replacement and 158 patients who underwent primary heart valve replacement among 239 patients that underwent heart vale replacement in out hospital from January 1995 to December 2004. Result: There were no differences in age, sex, and preoperative ejection fraction between the repeated valve replacement group of patients and the primary valve replacement group of patients. In the repeated valve replacement group, the previously used artificial valves were 3 mechanical valves and 23 tissue valves. One of these cases had simultaneous replacement of the tricuspid and aortic valve with tissue valves. The mean duration after a previous operation was 92 months for the use of a mechanical valve and 160 months for the use of a tissue valve. The mean cardiopulmonary bypass time and aortic cross clamp time were 152 minutes and 108 minutes, respectively, for the repeated valve replacement group of patients and 130 minutes and 89 minutes, respectively, for the primary valve replacement group of patients. These results were statistically significant. The use of an intra aortic balloon pump (IABP) was required for 2 cases (8%) in the repeated valve replacement group of patients and 6 cases (3.8%) in the primary valve replacement group of patients. An operative death occurred in one case (4%) in the repeated valve replacement group of patients and occurred in nine cases (5.1%) in the primary valve replacement group of patients. Among postoperative complications, the need for mechanical ventilation over 48 hours was different between the two groups. The mean follow up period after surgery was $6.5{\pm}3.2$ years. The 5-year survival of patients in the repeated valve replacement group was 74% and the 5-year survival of patients in the primary valve replacement group was 95%. Conclusion: The risk was slightly increased, but there was little difference in mortality between the repeated and primary heart valve replacement group of patients. Therefore, it is necessary to reconsider the issue of avoiding the use of a tissue valve due to the risk of additional surgery, and it is encouraged to use the tissue valve selectively, which has several advantages over the use of a mechanical valve. In the case of a repeated replacement, however, the mortality rate was high for a patient whose preoperative status was not poor. A proper as sessment of cardiac function and patient status is required after the primary valve replacement. Subsequently, a secondary replacement could then be considered.

• Korean System Dynamics Review
• /
• v.8 no.1
• /
• pp.151-171
• /
• 2007

Without exception, diverse LULU(Locally Unwanted Land Use) facilities have been under the location conflict, especially between the public government units and local residents. In spite of repeated trials-and-errors, literally, the location conflict has shown no sign of improvement over time in Korea. As practical means to tackle these issues, this study focuses on divulging explicit and implicit relationships among key factors derived from the location conflict on the LULU facilities. Here, major research variables cover residents' agreement, residents' perception, compensation expectation, and public opinion. As the location conflict on the LULU facilities could be strengthened or resolved by the dynamic feedback system, it applies basic tools geared toward causal loop diagramming. After repeated experiments, the study highlights the fact that the residents' perception, compensation expectation, and public opinion, individually and collectively, exert significant impact on the residents' agreement ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.71-75
• /
• 2021

Despite the development of computational resources, the need to analyze models is increasing. The size of model has been increased to analyze the entire structure more accurately and precisely. As the analysis model becomes larger and more complex, the computation time increases exponentially. Various industries use many structures that have repeated patterns. We focus on these structures with repeated patterns and propose a dynamic analysis method to efficiently calculate these repeated structures. To devise an efficient method for repeated structures, the substructuring scheme and the degree of freedom-based reduction method are used in this study. We modify the existing reduction method in consideration of the characteristics of the repeating structure. In the proposed method, the entire structure was expressed as a combination of substructures, where each substructure was represented as an unit cell of repeated structures. The substructures were condensed and assembled using the substructuring scheme and the modified condensation method. Finally, numerical examples were demonstrated to verify the efficiency and accuracy of proposed method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.156-170
• /
• 2023

Objectives: This study conducted practical training to improve the proper usage of personal protective equipment(PPE), which greatly impacts workplace safety and health management. Personal protective equipment education was conducted through active participation, without theoretical modules, and aimed to identify the effects of repeated practical education and determine ways to increase participant satisfaction. Methods: Study data were analyzed using the IBM SPSS Statistics ver.29 software. First, participants' general characteristics were analyzed with frequency analysis. Second, the normality and equality of variances (Leven's test) were tested for the dependent variables prior to statistical analyses to determine the use of parametric tests. In general, normality is assumed when the sample size is 30 or more per the central limit theorem (Park et al., 2014). As our sample size of health management workers was 43, normality can be assumed. However, to ensure rigor of the study, we examined skewness and kurtosis. The results confirmed that the data were normally distributed. Third, the effects of repeated PPE training were analyzed using paired t-tests. Fourth, differences in satisfaction with PPE training according to the safety and health job position and safety and health certification were analyzed with t-test and Welch's t-test. For parameters that did not meet the assumption of equal variances, the Welch's t-test was performed. Results: Repeated PPE training improved the educational outcomes, and the improvements were significant in the 1st and 2nd respiratory PPE and safety and hygiene PPE training evaluations (p<.001). In terms of safety and health job position, repeated training led to improvements in educational outcomes, with significant improvements observed among supervisors and specialized health management institution workers in the 1st and 2nd training evaluations (p<.005). In terms of safety certification, repeated training led to improvements in educational outcomes, with significant improvements observed among both certified and non-certified individuals (p<.005). Regarding satisfaction with PPE training according to safety and health job positions, specialized health management institution workers showed greater satisfaction than supervisors, with significant differences in the satisfaction for expertise of lecture, work relevance, and lecturer's attitude (p<.001). Regarding satisfaction with PPE training according to safety and health certification, satisfaction was higher among certified individuals, with significant differences in satisfaction for work relevance and lecture attitude (p<.05) Conclusions: PPE education should be recommended to be provided as practical training. Repeated training can enhance educational outcomes for individuals with inadequate knowledge and understanding of PPE prior to education. For individuals with high levels of pre-existing knowledge and understanding of PPE, the results show that various training experiences should be provided to enhance their satisfaction. Therefore, it suggests that the workplace should actively seek educational media and methods to acquire expertise and skills in wearing personal protective equipment and improve the ability to use

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.3
• /
• pp.239-244
• /
• 2000

Effects of acetic acid, malic acid and citric acid on copper dissolution from new and used copper saucepans at different concentrations (0, 0.02. 0.04, 0.1 0.2, 0.4, 1.0, 2.0, 4.0%), different boiling times (0,10, 20. 30, 40, 50, 60mins.), and different temperatures (5, 20, 40, 60, 80, 10$0^{\circ}C$ ) were investigated. As acetic acid concentration increases, copper content increases. Copper dissolution concentration from copper saucepans at boiling in malic acid increases more than in acetic acid or citric acid. At above 6$0^{\circ}C$, as the temperature increases, the concentration of copper dissolved from copper saucepans also increases. As boiling time increases, the concentration of copper dissolved from copper saucepans also increases. In addition, through repeated use, the concentration of copper increases as well. And copper concentration dissolves in large amounts from used saucepans rather than new saucepans. The dissolution of copper with distilled water by repeated use does not dissolve at all. 1% acetic acid dissolves in large quantities.