• 대한교통학회지
• /
• 제20권1호
• /
• pp.111-119
• /
• 2002

SP 방법의 장점중 하나는 개인의 응답자로부터 다수의 응답(Repeated observations)을 받을 수 있는 점이다. 그러나 이렇게 얻은 개인의 다중응답을 각각의 응답이 독립적이라는 것을 가정하고 있는 단순한 모델링방법을 이용해서 분석하면 t값이 상향되는 문제를 가져올 수 있다. 이러한 문제를 다중응답의 문제(Reapeated Measurement Problem)라고 한다 본 연구는 다양한 접근을 통해서 이러한 다중응답의 문제(Reapeated Measurement Problem)를 다루고, 단순한 모델링방법을 통한 모델추정치가 신뢰할 만한가를 검증하도록 한다. 다양한 접근중에서 본 연구에서는 Jackknife와 Kocurs 방법을 적용하였다. Jackknife 방법은 JACKKNIFE란 소프트웨어를 사용해서 분석하였다. Jackknife 추정치와 Kocurs 추정치를 단순한 모델링기법을 적용한 모델추정치와 비교하여서 다중응답의 문제(Repeated Measurement Problem)의 발생여부와 모델추정치에 어느정도 영향을 미치는 지를 분석하였다. 단순모델링의 추정치와 Jackknife 추정치의 표준오차도 비교하였다. 결과를 요약하면. Kocurs방법의 추정치의 t값은 단순한 모델링기법과 Jackknife 추정치의 t값보다 매우 낮게 나타났으며, 이는 Kocurs방법은 파라미터의 유의성을 지나치게 하향추정하는 것을 의미한다. Jackknife 방법의 추정치는 단순한 모델링기법의 추정치와 계수값은 거의 유사하나 t값이 다소 적은 것으로 나타났다. 이러한 결과들은 단순한 모델링기법의 계수값은 정확하나 유의정도가 다소 과장되는 것을 의미한다. 결론적으로 본 연구에서 사용한 데이터에는 다중응답의 문제가 존재하나 모델추정 티에 유의하게 영향을 미치지 않는 것으로 나타났다 SP 방법을 사용한 데이터를 분석할 경우 다중응답의 문제(Repeated Measurement Problem)를 분석하는 절차를 반드시 수행하여야 한다. 만약 단순한 모델링기법의 추정치가 다중응답의 문제로 인해서 영향을 받았다면 반드시 모델링 추정치를 보정하여야 한다.

• 응용통계연구
• /
• 제19권3호
• /
• pp.565-578
• /
• 2006

의약학 분야에서는 두 집단에서 하나의 반복요인을 가지는 반복측정 자료가 많이 사용된다. 이 논문에서는 반복측정된 자료에서 두 군의 시간에 따른 반응값의 선형추세를 비교하여 두 집단간의 차이를 검정하는 방법을 제안한다. 각 개체에서 회귀계수를 추정하고 추정된 회귀계수들에 의해 생성된 표본을 가지고 이표본 t검정(unpaired t-test), 윌콕슨 순위합 검정(Wilcoxon rank sum test), 위치검정(placement test)으로 두 집단간 기울기의 차이를 검정한다. 모의실험(Monte Carlo Simulation)을 통해 실험유의수준(experimental significance level)과 검정력 (power)을 비교하였다.

• Corrosion Science and Technology
• /
• 제12권3호
• /
• pp.142-148
• /
• 2013

Safety is a major concern in Nuclear Power Plants (NPPs). Piping systems in NPPs are very complex and composed of many components such as tees, elbows, expanders and straight pipes. The high pressure and high temperature water flows inside piping components. As high speed water flows inside piping, the pipe wall thinning occurs in various reasons such as FAC (Flow Accelerated Corrosion), LDIE (Liquid Droplet Impingement Erosion) and Flashing. To inspect the wall thinning phenomenon and protect the piping from damages, piping components are checked by UT measurement in every overhaul. During every overhaul, approximately 200~300 components (40,000~60,000 UT data) are examined in NPPs. There are some methods from EPRI for evaluating wear rate of components. However, only few studies have been conducted to find out the raw data reliability for the wear rate evaluation. Securing the reliable raw data is the key factor for a reasonable evaluation. This paper suggests the reliability analysis method for the repeatedly measured data for wear rate evaluation.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.945-957
• /
• 2009

의약학 분야에서는 여러 집단에서 하나의 반복요인을 가지는 반복측정 자료가 많이 사용된다. 이 논문에서는 대조군과 처리군들의 시간에 따른 반응값의 선형추세를 비교하기 위하여 각 개체의 기울기를 추정하고 추정된 기울기들에 의해 생생된 표본으로 F-test, Jonckheere-Terpstra test, updated control group procedure를 이용하여 대조문과 처리군들의 차이를 검정하는 방법을 제안하였다. 모의실험 (Monte Carlo Simulation)을 통해 실험유의수준(experimental significance level)과 검정력(power)을 비교하였다.

• 동의생리병리학회지
• /
• 제36권5호
• /
• pp.193-208
• /
• 2022

In this study, we proposed a mathematical model that can explain the source of the observed variability of repeated measurement data collected in Korean medicine clinical practice, and conducted a pilot analysis to infer the source of these variability based on our model. Mathematical model was constructed by dividing the observed variations into three components: common time-dependent variations, signal shift, and measurement error. To show the applicability of our model in real data, we analyzed 20 repeated measurement data of Korean clinical indicators in graduate students of Pusan National University Graduate School of Korean Medicine. We showed how to infer each source of variations based on our model and also showed the limitation of inference given the acquired the dataset. On the basis of objective recognition of these source of the variability, we hope that quantitative investigations on these sources for each Korean medicine clinical indicator are made in the future, so that they can be used in the clinical and educational areas of Korean medicine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.331-334
• /
• 2004

A new measurement scheme is proposed to generate an optimized boost table for video rate LCD response time compensation. This method, which closely follows basic theory, enables up to a 90% reduction in the lookup table creation time compared to conventional methods. Furthermore, while conventional approaches require all measurements to be repeated in order to load the entire LUT whenever key parameters such as refresh rate or boost intensity are modified, the method proposed in this paper allows the new table to be calculated by utilizing saved waveform data without the need for any repeated measurements.

• 응용통계연구
• /
• 제31권1호
• /
• pp.29-40
• /
• 2018

데이터를 수집함에 있어 여러 가지 이유로 결측이 발생하게 된다. 결측치는 분석 및 결과에 적지 않은 영향을 미치므로, 이를 해결하기 위해 결측치를 처리하는 다양한 방법들이 연구되었다. 반복 측정 자료에서 초기 시점의 측정값이 어떠한지에 따라서 뒤의 시점 측정값이 어느 정도 영향을 받을 수도 있을 것으로 생각된다. 하지만 기존 방법에서는 이러한 개념을 이용한 결측치 대체가 없었으므로 본 연구에서는 반복 측정 자료에서 초기 시점을 이용한 군집화 및 Kim과 Kim (2017)이 제안한 특성도를 이용하여 새로운 결측치 대체 방법을 제안하였다. 또한 여러 반복 측정 자료를 이용하여 Monte Carlo 모의실험을 통하여 기존 결측 대체 방법과 제안 방법의 여러 대체 성능을 비교해 보았다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.589-597
• /
• 2017

This study aims to verify experimentally the specifications of the data acquisition system required for the precise measurement of signals in an underwater explosion (UNDEX) experiment. The three data acquisition systems with different specifications are applied to compare their precision relatively on maximum shock pressures from UNDEX. In addition, a method of assessing the acquired signals is suggested by introducing the concept of measurement uncertainty. The underwater explosion experiments are repeated five times under same conditions, and assessment is conducted on maximum quantities acquired from underwater pressure sensors. It is confirmed that the concept of measurement uncertainty is very useful method in accrediting the measurement results of UNDEX experiments.

• 대한정형도수물리치료학회지
• /
• 제24권2호
• /
• pp.1-7
• /
• 2018

Background: This study was carried out to investigate the effect of mulligan taping group and repeated measurement group on muscle activity and grip strength of adult with forward head posture. Methods: Thirty adults with forward head posture were randomly assigned to each of 15 mulligan taping and repeat measurement groups. The mulligan taping group measured the pre-test and post-test muscle activity and the grip strength three times and compared the mean values. The repeat group was repeatedly measured and measured before and after the experiment, The collected data were analyzed using SPSS statistical program. Results: There was no significant difference between mulligan taping group and repeated measurement group in changes of muscle activity. There was a significant difference between mulligan taping group and repeated measurement group in changes of grip strength. Conclusions: Mulligan taping was applied to an adult with forward head posture, there was no significant change in muscle activity of flexor carpi radialis and palmaris longus, but it seems to improve hand function by re-aligned of nearby muscles by maintaining scapular stability.

• 대한한의학회지
• /
• 제38권4호
• /
• pp.55-61
• /
• 2017

Objectives: In order to accurately measure skin moisture and accumulate normal skin moisture data, analyzing the uncertainty of the skin moisture measurement and establishing standard reference data is essential. It helps to evaluate the skin's condition and has great significance in diagnosis and treatment. In this study, the traceability of the equipment and the uncertainty of the results were analyzed for their potential use in the field of Korean medicine. The data was collected measuring skin moisture on the sole of the foot. Methods: One professional measured the moisture of the adult male's foot 10 times following a determined protocol. The standard uncertainty of repeated measurements was calculated from the mean value of 10 repeated measurements. Ten trainee participants also measured the adult male's foot following a determined protocol. The standard uncertainty by tester was calculated from the value of repeated measurements. Results: As a result of analyzing the difference between the mean and standard uncertainties in both the expert and trainees, it was confirmed that the variance in this study did not satisfy the normal distribution. In addition, the Mann-Whitney U-test was carried out, and it was found that there was no significant difference in the measured values of the two groups. The authorized uncertainty of measurements and traceability of all the equipment was not confirmed. Conclusions: This paper establishes the basis for later measurement-equipment research to provide the objective indicators to approach the dryness of plantar skin from dehydration, the Korean medicine perspective.