• KSBB Journal
• /
• v.15 no.3
• /
• pp.247-253
• /
• 2000

This study was aimed to enhance polycyclic aromatic hydrocarbon(PAHS) biodegradation rate by repeated-batch treatment using immobilized cells of Phanerochaete chrysosporium. In the repeated-batch operations with 30 mg/L of pyrene the maximum degradation rate was 6.58 mg/L day. As the number of batches increased the concentration of immobilized cells significantly decreased and the degradation rate and specific acitivity gradually increased to a maximum value and then decreased. To have PAH degradation activity and cell mass recovered one batch of cultivation using the growth medium instead of the PAH-degrading medium was carried in the course of repeated-batch operations. This maximum degradation rates of pyrene and anthracene were 4.29 and 4.46 mg/L$.$day respectively. Overall the rate of PAH degradation could be enhanced 2.5-30 folds by using immobilized cells compared to the case of using suspended cells.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Knowledge Management Research
• /
• v.17 no.2
• /
• pp.187-204
• /
• 2016

In this study, we investigated the repeated vist of the e-village shopping mall as an online agricultural business platform. We applied Pine and Gilmore (1998) theory for the e-village website information systems. We hypothesized that 4 dimensions such as entertainment experience, educational experience, esthetic experience, and escapist experience toward satisfaction and, moreover, we investigated the moderating trust effect of satisfaction and repeated visit website. We set those independent variables (entertainment experience, educational experience, esthetic experience, and escapist experience) and dependent variable as experience satisfaction. The results indicated that the 4 experiences factors had a positive effect on the experiential satisfaction, and the trust moderating effect has a negative effection between the experiential satisfaction and the repeated visit. The experiential satisfaction had a positive effect on the repeated visit of e-village websites.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.4
• /
• pp.289-298
• /
• 1992

Fouling is "a major unsolved" area in heat transfer research. Currently, fouling researches are performed in every directions-fundamental aspects, modeling and cumulating experimental data. In this study, an attempt was made to extend the knowledge in enhanced tube fouling. The Kern-Seaton fouling model which was originally proposed for smooth tube fouling was extended to repeated rib tubes. Key parameters-mass transfer coefficient and wall shear stress-were modeled for repeated rib tubes. Some critical points related with the enhanced tube fouling-uncertainties in the mass transfer rate, wall shear stress modeling, deformation of roughness shape during fouling-were discussed, and some quantitative evaluations were made.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.71-78
• /
• 1997

Wear is affected by numerous factors-contact load, sliding velocity and distance, friction coefficient, material properties and environmental conditions. Among these wear factors, surface hardness is one of very important factors to determine wear. But surface hardness is varied by work hardening during repeated sliding contact. In this reason wear rate is increased or decreased with varying surface hardness, and transition of wear mechanism is happened. In this study, the surface hardening by accumulating residual stress was analyzed by considering the repeated sliding Hertzian contact model. The results showed that surface hardness was increased with increasing contact load, friction coefficient and contact number. And the depth of hardening layer, plastic layer and elastic layer depended upon contact load and number, but they didn't depend upon friction coefficient. The predicted surface hardness was about 1.5-1.8 times as hard as the material.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.435-442
• /
• 2001

A new technique to grow a manganese-doped zinc-sulfide(ZnS：Mn) has been proposed using the repeated deposition of the Hot Wall method. The optical characteristics and crystallinity for the ZnS and ZnS：Mn thin films deposited on a quartz glass substrate by the method were investigated. Also, The ZnS：Mn thin film elcetroluminescent devices were fabricated by the method to study luminescence characteristics. All films showed (111)-oriented cubic structure. By the repeated deposition, the deposition rates were decreased, and the optical characteristics and crystalline properties were improved, which clarifies that the method is effective to deposit the thin films with good crystallinity Futhermore, the crystallinity was more improved by the doping of Mn. Only one peak emission at around 585nm originating from Mn luminescent center is observed In the photoluminescent and electroluminescent spectra of ZnS：Mn films and the luminance of the ZnS：Mn-based thin film electroluminescent devices was obtained below 60cd/$m^2$ . The optical and crystalline properties, luminescence characteristics are discussed in terms of the effects of the repeated deposition and Mn-doping.

• Toxicological Research
• /
• v.18 no.2
• /
• pp.149-157
• /
• 2002

Though the bamboo salt, called as "JUKYUM" has been widely used in Korea as panacea, it's toxicity was not screened completely. To investigate the toxicity of bamboo salt, we compared with the toxicity of crude salt and reagent-grade NaCl by performing repeated dose (3 month's) oral toxicity test in SD rats. Crude salt, natural sun-dried salt (crude salt) production, was purchased from the western seashore of Korean peninsular and reagent-grade NaCl was purchased from Sigma company. Results of repeated dose oral toxicity tests for 3 months (bamboo salt; 750, 1500, 3000 mg/kg/day, crude salt : 3000 mg/kg/day, reagent-grade NaCl; 3000 mg/kg/day) suggested that the bamboo salt treated group show no significant toxicological findings with body weights and organ weighs changes, and hematological, serum bio-chemical and histopathological findings compared with other groups.er groups.

• ETRI Journal
• /
• v.20 no.4
• /
• pp.327-345
• /
• 1998

This paper deals with the problem of one-to-one mapping of 2$^n$ task modules of a parallel program to an n-dimensional hypercube multicomputer so as to minimize the total communication cost during the execution of the task. The problem of finding an optimal mapping has been proven to be NP-complete. First we show that the mapping problem in a hypercube multicomputer can be transformed into the problem of finding a set of maximum cutsets on a given task graph using a graph modification technique. Then we propose a repeated mapping scheme, using an existing graph bipartitioning algorithm, for the effective mapping of task modules onto the processors of a hypercube multicomputer. The repeated mapping scheme is shown to be highly effective on a number of test task graphs; it increasingly outperforms the greedy and recursive mapping algorithms as the number of processors increases. Our repeated mapping scheme is shown to be very effective for regular graphs, such as hypercube-isomorphic or 'almost' isomorphic graphs and meshes; it finds optimal mappings on almost all the regular task graphs considered.

• The Korean Journal of Applied Statistics
• /
• v.21 no.4
• /
• pp.621-630
• /
• 2008

This paper discusses how to construct a generalized marginal logit model for analyzing repeated polytomous response data when some factors are applied to larger experimental units as treatments and time to a smaller experimental unit as a repeated measures factor. So, two different experimental sizes are considered. Weighted least squares(WLS) methods are used for estimating fixed effects in the suggested model.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.6
• /
• pp.1409-1419
• /
• 2013

We analyzed the data from KYPS using the latent growth model which has been widely studied as an analysis method of longitudinal data. In this study, we applied repeated measures ANOVA to unconditional model in order for faster decision of the unconditional model of the latent growth model. Also, we compared the six-type models, the quadratic model and the model of which repeated measures ANOVA is applied.