• 대한전자공학회논문지TC
• /
• 제46권3호
• /
• pp.19-25
• /
• 2009

본 논문에서는 이동통신채널에서 발생하는 간섭현상을 제거하기 위한 적응형 채널추정(adaptive channel estimate) 알고리듬을 제안하였다. 기존 LMS 알고리듬은 입출력사이 오차를 줄이기 위해 사용하는 첫 기준신호의 선택에 따라 수렴속도와 오차정확도에 많은 영향을 받는다. 본 논문에서 제안한 적응형 채널추정 알고리듬은 간섭신호와 유사한 기준신호를 정하기 위해 LMS 알고리듬을 수행하기 전에 병렬의 컨볼루션 연산을 수행한다 컨볼루션 연산을 통해 출력된 신호는 채널의 지연시간과 진폭특성을 가지고 있어 간섭신호와 유사한 특성을 가진다. 제안된 알고리듬의 성능평가는 이동통신환경과 유사한 Jake's 모델에 Doppler 주파수는 130 Hz, Random한 5개의 경로가 존재하는 Rayliegh 다중경로 채널환경에서 실험하였다. 모의실험결과 기존 LMS 알고리듬은 데이터 150개를 반복 수행함으로써 약 -40 dB의 제곱오차수렴을 보였고 제안한 적응형 채널추정 알고리듬은 데이터 200개를 반복 수행함으로써 약 -80 dB의 제곱오차수렴을 보였다. 데이터의 반복연산에 따른 수렴속도는 다소 증가하였으나 제곱오차정확도는 약 40 dB의 우수한 개선특성을 보였다.

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.11-17
• /
• 2005

This study was performed to analysis the operation process when fabric pattern design was done by the use of CAD system compared with the manual work in order to determine the operation efficiency with the application of fabric design CAD system. The results of the study were as follows: 1. since 160,000 colors were supported by CAD system, color proposed by consumer was able to match exactly according to the its design. However, exact color matching was not possible by manual work. 2. Woven state of back of pattern design could be identified simultaneously with face of it for CAD system, while face and back of the fabrics should be designed separatedly in case of manual work. 3. Since the combination of warp and filling yarn was compatible with the fabric density in one repeat unit in CAD system, exact size of pattern design to be woven was able to expressed. 4. Only simple graphical expression by manual work was seen, while with the CAD system, texture and shade effect as well as graphical expression could be expressed and so fault could be reduced in advance with the simulation of actual feeling of fabrics in the screen. In conclusion, when CAD system will be introduced to the textile industry, operation time of designing pattern can be reduced. Since the operation is easy and simple, a beginner can operate CAD system easily. Thus, production and wage costs can be saved and this can be related directly with the improvement of productivity which is the main purpose of introducing CAD system.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.21-26
• /
• 2008

A pin bush bearing is one of the most important element in the piston engine which is joined a piston to a connecting rod. A pin bush is suffered by heat and changeable repeat loads, which are come from the explosive gas heat and pressures during a reciprocating stroke. Therefore, a tribological behavior of pin bush bearings is very severe compared to other parts of a piston assembly. To keep a stable operation of pin bush bearings effectively, it would be satisfied with proper oil film strength for severe operating conditions and durability, which are strongly related to the oil film thickness, oil film pressure, and a friction loss power. The computed results show that the viscosity of engine oils slightly affects to the minimum oil film thickness and oil film pressure distribution, but is an influential parameter on a total friction loss power. Thus the low viscosity engine oils for an increased operation condition should select a high level of base oil and add a viscosity index improver as an oil film additive.

• 융합정보논문지
• /
• 제7권2호
• /
• pp.59-65
• /
• 2017

창의적 모듈형 완구의 동작 구현을 위하여 동작을 기록하고 또한 읽어서 반복 동작하는 방식의 움직임이 요구된다. 이 때 완구 동작용 모터 출력축에는 전위차계를 사용하여 절대 회전각을 읽어서 제어를 수행하게 된다. 하지만 전위차계의 감지 영역의 불안정한 부분이 일정 영역에 존재하게 되는데 이로 인한 모터 제어의 불안정을 가져올 수 있다. 본 논문에서는 2개의 전위차계를 한 축에 장착시켜 안정된 영역을 각각 읽어서 1회전 절대각을 찾는 알고리즘을 제안한다. 그리고 다중 회전을 수행 시 필요로 하는 보정 알고리즘에 대해서도 기술하였다. 제안된 방식은 실제 토포보 모듈라 완구에 적용하여 동작을 기록하고 반복 동작을 수행하여 효과적으로 동작됨을 보였다. 아울러 다 회전 동작을 기록하고 동작 시켜 제안된 방식의 유용성을 제시하였다. 향 후 다양한 동작을 통하여 기록과 재생의 기능을 확대해 나갈 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.933-934
• /
• 2007

We fabricated and tested a resistive type superconducting fault current limiter (SFCL) based on BSCCO-2212 bulk coils. Each bulk coils of the SFCL was designed to have the rated voltage of 220 $V_{rms}$ and the critical current($I_C$) of 320$\sim$340 A at 77K. Ten components in series, make the SFCL having the rated voltage of 2.2 $kV_{rms}$ for equal quench test. The fault test was conducted at an input voltage of 2.2 $kV_{rms}$ and fault current of 25 $kA_{rms}$. In addition, we examined the endurance characteristics for all bulk coils through repeat fault test. Test results shows that the SFCL successfully limited the fault current of 25$kA_{rms}$ to below $7{\sim}8kA_{p}$ within minimum 1.1msec after fault occurred. All bulk coils quenched together upon faults and shared the rated voltage evenly. The endurance test results show an equivalent among repeat fault test. During the quench process, average temperature of all bulk coils did not exceed 250 K, and the SFCL was totally safe during the whole operation.

• 산업기술연구
• /
• 제28권A호
• /
• pp.113-117
• /
• 2008

Wireless carrier sense multiple access (CSMA) systems are widely used but show extremely different transmission efficiency according to the operation environment. Simulation or prototype deployment is needed to see the transmission efficiency of a wireless CSMA system with the partial packet retransmission scheme. The lower bound for the transmission efficiency of such a system is found mathematically in this work. This shows how much the partial packet retransmission scheme improves the transmission efficiency quantitatively. It also shows that the maximum throughput is obtained at higher offered load compared to the conventional CSMA system without the partial packet transmission. The result of this work can be applied to IEEE 802.11 networks or wireless mesh networks.

• Journal of Chest Surgery
• /
• 제28권4호
• /
• pp.409-411
• /
• 1995

One patient developing left main coronary stenosis following double valve replacement is reviewed. Angina pectoris developed 5 months postoperatively. Coronary perfusion with a balloon tip perfusion catheter was performed during previous operation and was considered technically satisfactory. Coronary angiography confirmed stenosis of the left main coronary artery. There was no further coronary arterial disease. An anterior approach between the aorta and pulmonary artery to expose the left main coronary artery was used and patch angioplasty was done. Repeat coronary angiography showed a widely patent left main coronary artery with excellent runoff. A careful search for coronary arterial injury should be made in all symptomatic patients following aortic valve replacement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1328-1331
• /
• 2003

As rates of gastric cancer. fatness. and GERD (chronic gastric esophageal reflux disease) patients have been increased in the world, suturing mechanism using endoscope has been focused. which is the medical instrument to apply stitches and suturing inside the body, since it helps the patients lessen pains and reduce operation time. This paper deals with mechanism design, which makes it possible to apply multiple suturing without the repeat of inserting and removing the endoscope. This successive suture mechanism includes gripper, linkage, rotational part, and articulation part. Also, the mechanism is operated through 4mm one-side channel attached to the endoscope by means of pulling wires.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.390-395
• /
• 2000

We present a fingerprint identification algorithm using the wavelet transform and correlation. The wavelet transform is used because of its simple operation to extract fingerprint minutiaes features for fingerprint classification. We perform the rowwise 1-D wavelet transform for a $256\times256$ fingerprint image to get a $1\times256$ column vector using the Haar wavelet and repeat 1-D wavelet transform for a 1$\times$256 column vector to get a $1\times4$ feature vector. Using PNN(Probabilistic Neural Network), we select the possible candidates from the stored feature vectors for fingerprint images. For those candidates, we compute the correlation between the input binary image and the target binary image to find the most similar fingerprint image. The proposed algorithm may be the key to a low cost fingerprint identification system that can be operated on a small computer because it does not need a large memory size and much computation.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.31-36
• /
• 2003

Base and saddle feed drive system in machine tool puts in operation for Improvement of life and endure by high frequency heat treatment. In this time, work requirement of establishment to gets by repeat experimentation. In this paper, using the finite elementary method, we predict and revision processing, and gets minimizing of deformation and reduce the progress of Grinding works. Moreover, having high frequency heat treatment, the maximum deformation genesis m the middle parts without slideway length. Take deformation Into finite element program (ANSYS) of taper process in roughing process, after having high frequency heat treatment, existed quantity of deformation can be reduced down to 80 percents.