Journal of the Korean Institute of Traditional Landscape Architecture
/
v.41
no.1
/
pp.21-34
/
2023
This study identified the materials and construction methods of 'Old Wall' in 13 villages which were designated as National Registered Cultural Heritage at the time of designation and examined the their structural changes based on field survey. The results are as follows: First, the 'Old Wall' consisted of 10 Soil-Stone Wall and 5 Stone Wall. At the time of designation, Stone Wall, which was built irregularly by dry-construction of natural stones, is similar in shape, but Soil-Stone Wall showed difference by the construction method of making used stones, joints, and faces. Second, the study extracted the changes of 'Old Wall' by repair and examined the changes of construction methods as well as the substitution and addition of materials of structure. The wall-roof was built with cement roof-tile and asbestos slate which have the advantage improve durability and cost-effectiveness. In addition, tile-mouth soil was added to korean traditional roof-tile to prevent rainwater from flowing in. Besides, to improve constructional convenience, the natural stone of the wall-body was replaced with blast stone, float stone and cut stone. Cement block, cement brick and cement mortar were frequently used to repair as well. As Soil-Stone Wall was transformed from irregular pattern-construction to comb pattern-construction and wet-construction was changed to dry-construction, it caused landscape and structural problems. Also, the layer of cement mortar applied to wall-foundation blocked the flow of rainwater that was induced by dry-construction of natural stones. Third, the study regarded that the problem with the repair of 'Old Wall' may occur as it is located in living space, because the owner of the wall could repair for the minor damages without technical knowledge. In addition, it is difficult for repair companies in charge of maintenance of Cultural Heritage to supply local materials, and it is differential construction specifications are not applied.
Journal of the Korean Society of Clothing and Textiles
/
v.17
no.1
/
pp.3-10
/
1993
This study intends to provide a beneficial foundation which can aid our understanding of how a clothing consumer group can be classified according to the clothing buying motives, and what differences are there about the importances store image attribute among them and how consumer's preferences to the store image are shown differently among them and ultimately, some concrete data which can be useful in establishing efficient store image strategies for clothing stores. 484 subjects were gathered through convenience sampling method and, for data analysis, cronbach' ${\alpha}$, frequency, percentage, mean, ${\chi}^2$-text, t-test, ANOVA, Duncan Multiple Range Test, Factor Analysis, Cluster Analysis were conducted. the results are as follows; 1. three kind of factors in the clothing buying motives were determined for analysis of consumers group and by which it was revealed as to be significant for us to classify them three subdivisions; those of fashion pursuit group, self display group, financial utilitarian group. 2. Importance on store image attribute was revealed that Ewha students regarded quality, price, more important factors than others. 3. Store image preferences show significantly when concerned with quality, price, fashion, impression and age of store personnel, convenience for exchanging and returning goods, credit, delivery and repair, mailing of catalogue and discount coupon, bightness of store among consumer groups.
The Journal of the Korea institute of electronic communication sciences
/
v.7
no.5
/
pp.1153-1164
/
2012
In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.
Proceedings of the Korean Society For Composite Materials Conference
/
2001.05a
/
pp.135-140
/
2001
A post-tensioned reinforced concrete slab bridge is analyzed by specially orthotropic laminate theory. Symmetrically reinforced slab with tension and compression steel is considered for convenience of analysis. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of the rule of mixture. This bridge is under uniformly distributed vertical loads, and axial loads and end moments due to post-tensioning. In this paper, finite difference method is used for numerical analysis of this bridge. Theory and analysis method of specially orthotropic laminate plates used in this paper can be used for design of new bridges, and maintenance and repair of old bridges.
Proceedings of the Korea Concrete Institute Conference
/
2000.10a
/
pp.253-258
/
2000
Recently, the area of design optimization, especially structural optimization, has been and to be a continuous active area of research. And the design optimizations of port facilities have been achieved by many other civil engineers. But the design optimization of port facilities were limited to the design optimization of the breasting dolphin. This paper invested the design optimization of mooring pier and the foundations of mooring pier was suggested considering the convenience of repair and reinforcement work. The mooring pier devised with prestressed precast concrete panel and rigid frame welded wide flange beam to steel pipe pile. To accomplish the design optimization of mooring pier, the Augmented Lagrangian Multiplier Method(ALM) of ADS(Garret N. Vanderplaats) optimization routine, BFGS method as optimizer and Golden Section Method as one dimensional search were utilized. As a result, thirty percent of material cost for construction was reduced by design optimization. The tensile stress of concrete panel and bottom flage was critical constraints under service load. So, using high strength concrete and steel will be economical. And lots of initial values must be invested to accomplish the design optimization in design procedures.
The reference model for UNI (User Network Interface) of B-ISDN is consisted of three function groups (B-NTI, B-NT2 and B-TE). In this study, we constructed passive B-NT1 module which can be utilized for optical link management and repair, one of main functions of B-NT1. For the convenience of installation and management, this module is only consisted of passive optical devices. And at a local exchange center linked with the module, the broken zone of optic link is able to be monitored without interrupting services. In addition, we performed the power burget analysis for the design of efficient optic link including this module.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.19
no.4
/
pp.570-575
/
2010
This study is regarding development of an index table for antomation of welding process in impeller fabrication. A PLC, which is widely used for automation in industry, was also adopted as a controller for the index table because of it effectiveness, easy maintenance and repair. The index table consists of centering jig, blade jig, workbench, driving system and a controller. A touch screen was also prepaired as a man-machine interface to provide convenience for workers. Water jacket was installed inside the workbench to reduce thermal stress come from the welding. Temperature of the water jacket was kept constant to cool an impeller main plate effectively. The index table developed in this study convinces that it reduces the total welding time by 50% compared with the conventional process without the table.
This study intended to find out how the handicapped use medical aid, their satisfaction at using it and so on. First a preliminary survey(Apr. 20$\sim$24, 2002) was made for the handicapped who had been cured for rehabilitation by wearing medical aid at hospitals and welfare center in Jeonbuk region. Then total 120 subjects were asked to fill out a standardized questionnaire from May 15$\sim$22, 2002. Out of total 95 questionnaires collected, 84 questionnaires were analyzed except for 11 cases unsuitable for the intention of this study. The results can be outlined as follows: 1. In general characteristic, it was found that the causes of disability included disease(35 respondents; 41.7%), traffic accident(23 respondents, 27.4%) and so on. In addition, 1st handicap comprised the majority(32 respondents; 58.2%) in handicap grade and ankle foot orthosis(or b-k orthosis) was most often used as medical aid(28 respondents: 33.3%) 2. In particular, it was also shown that the 1st handicap mainly resulted from traffic accident(15 respondents, 27.3%) and post-disease disability (11 respondents, 20.0%). They wore medical aid for 1 year or less on the average, because they were hospitalized for cure, which showed statistically significant level(P<0.05). 3. It was found that total 69 respondents(82.1%) were more or less satisfied with their medical aids depending on the causes of disability, and total 46 respondents(83.6%) were satisfied with their aids according to their handicap grade, but there were no statistical significance. 4. Total 56(66.7%) respondents answered that they would purchase medical aid on their own expenses, when they became handicapped. And the price of medical aid ranged from $\300,000{\sim}400,000$(25 respondents: 29.8%) to \ 500,000 or more(24 respondents: 28.6%). It means that they purchased more or less expensive medical aid on their own expenses, which showed statistical significance(P<0.05). 5. If there was any failure of medical aid, 9 respondents(37.5%) answered that they would be serviced from medical companies, and 7 respondents(29.2%) would be serviced from medical aid manufacturers. Most respondents were serviced for their medical aids from related companies. For the question about the causes of dissatisfaction upon repair service, 11 respondents(45.8%) answered that existing service company provided unskilled repair services and other respondents answered that there was no spare part or higher service expenses than they thought. These answers had the statistical significance(P<0.05). However, 20 respondents(79.2%) answered that they were satisfied with the repair service, which means that most respondents are satisfied with the service. In view of the results as described above, it can be concluded that their handicap or disability results from disease or sequelae after traffic accident and most of the affected wear their own medical aid. In the future, it is required that the medical insurance should cover those medical aids, and the service for failed medical aids should be commissioned by technical serviceman to realize customized manufacture and repair service according to different causes so that the handicapped can enjoy more or less comfort and convenience in their daily lives without any extreme difficulty.
After the SI system of units was adopted as an international system of units, Korea made a lot of efforts such as administrative and educational guidance on the traditional units that had been used so far. In addition, from July 1, 2007, the government has cracked down on the denotation of non-statutory units of measurement as standard units or auxiliary units in commercial transactions. However, non-statutory weighing units are still used in other forms. It is believed that this is because non-statutory units (= our traditional units) are permeated in our lives and are convenient to use. The general public still finds it difficult to use and mark the SI system of units correctly. This is not a problem unique to Korea. However, if you look at the books that are currently used as university physics textbooks, the SI system of units and the non-legal units of other countries are marked in such a way that they can be accurately converted. Only the traditional units of our country are disappearing under the pretext of unit unification. Accordingly, we propose that our units should not be neglected in university education, but should be labeled together. The purpose of this study is to raise the necessity of reorganizing the unit conversion between the SI unit system and the traditional life improvement unit, which continues to be the convenience of life, and applying it in university physics education to enable the conversion with our traditional unit, and to educate the importance of the meaning and function of our traditional unit.
Journal of the Korean Society of Clothing and Textiles
/
v.14
no.4
s.36
/
pp.252-261
/
1990
This study intends to provide a beneficial foundation which can aid our understanding of how a clothing consumer group can be classified according to the clothing buying motives, and what differences are there about the importances of stroe image attribute among them and how consumer's preferences to the store image are shown differently among them and ultimately, some concrete data which can be useful in establishing efficient store image strategies for clothing stores. 413 subjects were gathered through convenience sampling method and, for data analysis, cronbach'$\alpha$, frequency, percentage, mean, $x^{2}-text$, 1-test, ANOVA, Duncan Multiple Range Test, Factor Analysis, Cluster Analysis were conducted. The results are as follows; 1. Three kind of factors in the clothing buying motives were determined for analysis of consumers group and by which it was revealed as to be significant for us to classify them four subdivisions; those of fashion pursuit group, self display group, financial utilitarian group, individual group. 2. Importance on store image attribute was revealed then the middle aged women regarded quality, price, service in order as more important factors than others. 3. Store image preferences show significantly when concerned with quality, price, fashion, impression and age of store personnel, convenience for exchanging and returning goods, credit, delivery and repair, mailing of catalogue and discount coupon, exit from, brightness of store among consumer groups. From these findings, concretely store image strategies are proposed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.