• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.248-257
• /
• 2019

On this study, we have observed the change of the gel nail morphology as the time elapse and measured the surface roughness/volume, moisture content/purcutaneous moisture vaporizing amount of the nail surface before gel nail treatment and after gel nail removing of the 100%acetone remover, 5%acetone remover and 0%acetone remover and the avocado non acetone remover for the comparison of the effect on the nail surface and the degree of the removing of the gel nail of the removers as the acetone contents. The removing ability were the order of 100%acetone remover, avocado non acetone remover, 5%acetone remover and the 0%acetone remover. There were no statistical significance difference in the nail surface roughness comparision before and after gel nail removing in 5%acetone, 0%acetone and avocado non acetone, and there was no statistical significance difference in the nail surface volume comparision before and after gel nail removing in 0%acetone. We measured the moisture content of the nail surface and the purcutaneous moisture vaporizing amount before gel nail treatment and after gel nail removing, resulted that, the decrease of the moisture content of the nail surface after removing the gel nail is the minimun and the increase of the purcutaneous moisture vaporizing amount of the nail surface after removing the gel nail is the minimun at the case of 0%acetone. In conclusion, 5%acetone remover and 0%acetone remover is possible to use as the gel nail remover and they had revealed that there was the least harmful effect on the nail. We hope that this study is utilized to the development of the non acetone remover and the basic research of the nail beauty industry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.79-84
• /
• 2012

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor's assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30~85cm length. The bobbin's diameter was 190mm and it's stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.775-779
• /
• 1999

This paper presents design of AGC(Automatic Gain Control) and DC offset remover suitable for cable modem which makes use of QAM(Quadrature Amplitude Modulation) scheme. Since QAM has multi-level signal characteristic, for high-order QAM, the constellation is dense and the distance of decision boundary between adjacent symbols is short. So AGC and DC offset remover must be designed optionally for preventing performance degradation. AGC is designed into feedback type and is related to the STR(Symbol Timing Recovery)and Paff interpolation algorithm. Whereas AGC need to perform average power detection during many symbols by comparison with the reference power, DC offset remover uses only the instant polarity decision such that simple implementation can be achieved with good performance. Though the AGC and DC offset remover are simulated here only for 256 QAM scheme for convenience'sake, it can be applied to other multi-level QAM or PSK modulation scheme.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.215-220
• /
• 2005

It is common for clinicians to encounter endodontically tl·treated teeth that contain posts within their roots. If endodontic treatment is failed, these posts must be removed to facilitate successful nonsurgical retreatment. There have been many techniques such as ultrasonic instrument, Ruddle post removal system, Eggler post remover and Masserann kit developed to facilitate removal of posts from the root canal space. But these methods may be disadvantageous because long length of time required for post removal and fracture of post or teeth. In now days new post removal technique using ATD automatic bridge remover was introduced. Advantages of this method are simple and short time consuming compare to others. This article served as a successful case report of post removal using ATD automatic bridge remover.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.95-97
• /
• 2008

In this study eco-friendly wax remover for printing table of flat screen was investigated. Seven organic solvents, diethylene glycol monomethyl ester, triethylene glycol monomethyl ester, triethylene glycol monobutyl ester, tripropylene glycol monomethyl ester, dimethyl sulfoxide(DMSO), trichloro ethylene(TCE), tolune, were used as resin wax remover. The resin wax solubility with solvents was investigated. DMSO was found to be the most suitable eco-friendly resin wax remover.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.82-82
• /
• 2014

마감 도장이 완료된 면이 장기간 노출된 상태에서 후속 작업으로 인해 금속 분진 등의 오염물이 쌓이면 수분 및 염분 등과의 반응으로 도장 표면에 녹 등의 2차 오염이 발생하여 광택이나 표면 미려함 등을 잃어버리게 된다. 이럴 경우 소요되는 시간과 경비를 줄이기 위해 재도장 작업 대신 도장 표면의 오염 막을 제거하기 위한 방법으로 rust remover가 사용되고 있으나, 현재 rust remover 사용에 따른 도막 열화에 관한 객관적인 자료가 없는 실정이다. 본 연구에서는 당에서 사용되고 있는 선박용 마감 도료를 대상으로 rust remover가 도막 표면 열화에 미치는 영향에 대하여 조사 검토하다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.113-118
• /
• 2012

Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.997-998
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.375-376
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.533-534
• /
• 2012