• 한국작물학회지
• /
• 제49권3호
• /
• pp.243-250
• /
• 2004

본 시험은 찰벼의 수량제한요인을 알아내기 위하여 찰$.$메근동질유전자 계통인 화청찰벼와 와청벼를 공시하여 공급부위(잎)와 수용부위(영화)의 조절이 등숙에 미치는 영향을 구명함으로써 찰벼의 수량증대를 위한 기초자료를 얻고자 수행하였으며, 그 결과는 다음과 같다. 1. 이삭당 총립중과 편균립중의 감소경향은 두 품종 모두 차엽처리구 ＜ 지엽처리구 ＜ 상위 1, 3엽처리구 ＜ 상위 1,2엽처리구 ＜ 상위 1, 2, 3엽처리구 순이었다. 상위 1, 2, 3엽 제거에 의한 총립중과 평균립중의 감소율은 화청찰벼에 비하여 화청벼에서 컸다. 2. 화청벼와 화청찰벼 모두 전엽처리에 의한 고밀도립비율과 등숙율이 2차지경보다 1차지경에서 높았다. 3. 화청벼와 화청찰벼 모두 영화의 절제처리에 의하여 이삭당 총립수와 총립중이 대조구에 비하여 감소한 반면 평균입중과 등숙율은 증가되었다. 대조구와 비교한 평균입중의 증가율은 1, 2차지경립 및 상$.$하위지경립의 절제구 모두에서 화청찰벼가 화청벼보다 높았다. 4. 영화의 조절의 의하여 두 품종 모두 고밀도립비율과 등숙립비율이 증가되었으며 고밀도립비율은 화청찰벼가 화청벼에 비하여 높았던 반면에, 등숙립비율은 화청벼에서 높은 결과를 보였다.

• 한국습지학회지
• /
• 제23권1호
• /
• pp.60-66
• /
• 2021

도시화와 산업화로 인해 하수처리장으로 유입되는 하수 내 질소 농도가 증가함에 따라 부영양화 발생, 수생태계에 독성을 미치는 등의 악영향의 정도 또한 증가하고 있다. 고농도의 질소가 포함된 하수를 처리하기 위해 생물학적 질소 제거 공정에 대한 연구가 다방면으로 진행되고 있다. 기존의 생물학적 질소 제거 공정에 있어 산소공급과 외부탄소원 보충에 따른 상당한 비용이 요구된다. 이러한 측면에서 경제적인 개선이 이루어진 고도의 질소 제거 공정이 요구됨에 따라 최근 기존의 질산화·탈질 공정 보다 효율적이고 경제적인 혐기성 암모늄 산화 공정(ANaerobic AMMonium OXidation, ANAMMOX)이 제안되었다. 본 연구에서는 수처리공정에서의 ANAMMOX 공정의 안정성을 확인하고, Mainstream ANAMMOX 공정구현을 위한 암모니아성 질소(NH4+) 대비 아질산성 질소(NO2-) 비율을 도출하는데 목적이 있다. 선행연구에서 제시된 기질비율을 바탕으로 산정한 비율을 적용해 실험실 규모의 Mainstream ANAMMOX 반응조를 운전하였다. Initial 구간에서 NH4+ 제거효율은 58~86%, 평균 제거효율은 70%였다. Advanced 구간에서 NH4+ 제거효율은 94~99%, 평균 제거효율은 95%였다. 연구 결과 NH4+/NO2- 비율이 증가함에 따라, Mainstream ANAMMOX 공정의 안정성이 확보되어 NH4+ 제거효율 및 총질소(TN) 제거효율이 증가하는 경향을 확인할 수 있었다. 결과적으로, 본 연구결과는 이후 수처리공정에서의 ANAMMOX 공정 적용과 공정 안정성 확보에 있어 기초자료로 활용될 수 있을 것으로 보인다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.39-43
• /
• 2008

Atmospheric pressure plasma polishing (APPP) is a noncontact precision machining technology that uses low temperature plasma chemical reactions to perform atom-scale material removal. APPP is a complicated process, which is affected by many factors. Through a preliminary theoretical analysis and simulation, we confirmed that some of the key factors are the radio frequency (RF) power, the working distance, and the gas ratio. We studied the influence of the RF power and gas ratio on the removal rate using atomic emission spectroscopy, and determined the removal profiles in actual operation using a commercial form talysurf. The experimental results agreed closely with the theoretical simulations and confirmed the effect of the working distance. Finally, we determined the element compositions of the machined surfaces under different gas ratios using X-ray photoelectron spectroscopy to study the influence of the gas ratio in more detail. We achieved a surface roughness of Ra 0.6 nm on silicon wafers with a peak removal rate of approximately 32 $mm^{3}$/min.

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.215-221
• /
• 2013

Purpose: Opuntia Humifusa has been used in the food and beauty industry after removing spines and glochids clearly. This study compared the methods used in removing spines and analyzed the design factors for developing a spine removal device. Method: This study compared the spine removal ratios in accordance with the length of brush, water spray pressure, the number of water spray, and the size of Opuntia Humifusa in a rotating brush device and a water spray device. In addition, this study compared the reversal ratios according to the inclination angle of a conveyor, the drop height of Opuntia Humifusa, and the speed of the conveyor to analyze the reversal factors. Results: The spines were not removed clearly in the rotating brush method, and the glochids were nailed deeply. The spine removal ratio was 96.9% with the water spray pressure of 20 $kgf/cm^2$ and the conveyor speed of 10 cm/s in the water spray method. The number of water spray was correlated with the spine removal ratio, and the average spine removal ratio was 95.6% with three cycles of water spray. The reversal ratio was 97% with the inclination angle of the conveyor $20^{\circ}$, the drop height of 380 mm, and the conveyor speed of 10 cm/s. Conclusions: In order to develop a Opuntia humifusa spine removing device, this study compared the rotating brush and water spray methods. As a result, each spine removal performance of the rotating brush and water spray methods was 96.9% and 95.6%, respectively. Although the performance of the rotating brush method was slightly higher than that of the water spray method, the water spray method was suitable for removing spines from stem because the epidermis of stem was damaged and the glochids were nail deeply in the rotating brush method. Further studies on appropriate arrangement of spray nozzles, maintaining the optimal water spray pressure, the speed and angle control of the feeding conveyor, and devices for inducing the stem to the center will be needed in combining the water spray device and the reversal device.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.278-281
• /
• 2001

A fixed bed biofilm reactor filled with ceramic media were used to remove nitrogen by selective nitrification (ammonium to nitrite). The effects of experimental conditions (nitrogen load, dissolved oxygen, nitrite ratio, C/N ratio) on denitrification were investigated. The reactor showed more than 80% average T-N removal efficiencies at T-N loading in the range of $1.1{\sim}3.3$ kg $T-N/m^3{\cdot}d$ C/N at the C/N ratio of 1. T-N removal efficiencies increased as nitrite ratio.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.306-309
• /
• 2002

Micellar-enhanced ultrafiltration was investigated to remediate groundwater contaminated with chromate using a cationic surfactant, cetylpyridinium chloride (CPC). Removal of chromate was expressed as a function of molar ratio of CPC to chromate. With 10 molar ratio of CPC, removal efficiency of chromate was reached to over 99%. The rejection of CPC was 90% at 1 molar ratio, gradually increased as the molar ratio increased.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.603-609
• /
• 2004

The objective of this study was to determine the optimal operation conditions in an anoxic oxic process to eliminate both organic and nitrogen matters in swine wastewater. For the purpose of this, the removal efficiency was evaluated with various HRTs and internal recycling ratio. During the whole 580 days of experiment, HRTs had been gradually decreased in an order of 20, 14, 12 and l0days, and the internal recycle ratio was kept at 20Q. So as to determine the effect of the internal recycle ratio on the nitrogen removal, the internal recycle ratio had been gradually increased from 20Q to 50Q while HRT was maintained at 12days. As a result, it was shown that the removal efficiency of organic matter was above 95% regardless of changing of HRTs. The average influent concentration of TCODcr and SCODcr were 24,854 mg/L and 18,920 mg/L, respectively. Average removal efficiency of TKN was shown to be nearly 98% when HRT was kept at 12days; however, the $NH_4{^+}-N$ concentration of effluent was shown to be increased when the loading rate of $NH_4{^+}-N$ was increased to $0.602 kgNH_4{^+}-N/m^3$-day by means of decreasing HRT to 10days. It was concluded that nitrogen loading rates should be more considered rather than organic loading rates in case of determining an optimal HRT. When gradually increasing the internal recycle ratio from 20Q to 50Q, the removal efficiency of organic matters and TKN were 96% and 98%, respectively so that no significant changes in removal efficiency was detected. However, when the internal recycle ratio was kept at 50Q, it was revealed that the $NO_3-N$ concentration of effluent seemed to drop and the average $NO_3-N$ concentration of effluent was around 52 mg/L.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.277-284
• /
• 2012

This study developed a new ceramics in which natural zeolite was mixed and calcined with industrial by-product such as converter slag, red mud, and fly ash and evaluated the feasibility of the ceramics for removal of heavy metals in acid wastewater. The removal rate of heavy metal by ceramics increased in the order of ZS (zeolite and slag) > ZR (zeolite and red mud) > ZF (zeolite and fly ash) ceramics. The alkalinity increment and coherence of ceramics were increased in the order of ZS > ZR > ZF ceramics. The mixing ratio of natural zeolite to industrial by-product for maximum removal efficiency of heavy metal was 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The order of removal efficiency of heavy metal was observed to be ZS > ZR > ZF ceramics under the mixing ratio of 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The removal efficiency of heavy metal by ZS ceramics with 1:1 mixing ratio was Al 100%, Cd 54.6%, Cr 99.9%, Cu 98.7%, Fe 99.9%, Mn 42.2%, Ni 59.9%, Pb 99.8%, Zn 87.6%, respectively. In addition, the removal capacity of heavy metal by ZS ceramics was observed to be Al 2.01 mM/g, Cd 0.27 mM/g, Cr 1.02 mM/g, Cu 0.83 mM/g, Fe 0.95 mM/g, Mn 0.41 mM/g, Ni 0.55 mM/g, Pb 0.25 mM/g, Zn 0.70 mM/g, respectively. The comparative evaluation in the light of removal capacity, alkalinity increment, and coherence of ceramics showed the ZS ceramics had higher feasibility as a media than others for removal of heavy metals in acid wastewater.

• 한국지반공학회논문집
• /
• 제32권5호
• /
• pp.49-55
• /
• 2016

본 연구는 도심지의 도로 환경을 고려하여, 기능성 포장 재료 중 하나인 이산화티타늄($TiO_2$)을 포함한 시멘트 모르타르의 실질적인 일산화질소(NO) 제거 성능을 평가하고자 하였다. 실험은 크게 두 가지로, 유입되는 기체의 습도에 따른 NO 제거율 변화 실험과 시편의 포화도에 따른 NO 제거율 변화 실험으로 구성되었다. 습도 변화 실험에서는 건조 상태의 시편을 대상으로 유입 기체의 습도를 변화시키며 NO 제거율을 관찰하였다. 습도-NO 제거율 곡선은 로그 정규 분포 형상으로, 특정 습도에서 최대 NO 제거율이 나타났다. 포화도 변화 실험은 강우 및 생활 하수로 인하여 불포화 상태인 도로를 반영하고자 습윤 상태인 시편을 대상으로 하였다. 습윤 상태의 시편은 건조 상태보다 낮은 NO 제거 성능을 보였으며 증발이 진행되면서 $TiO_2$가 노출되어 NO 제거 성능이 증가하였다. 그리고 시편의 특정 깊이 아래에 존재하는 $TiO_2$는 NO 제거 성능에 크게 기여하지 않는 것으로 나타났다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.151-154
• /
• 2001

To assess the remediation possibility of groundwater contaminated with MTBE, micellar solubilization by various surfactants was evaluated. Micellar solubilization is basic phenomena to apply micellar enhanced ultrafiltration for groundwater remediation contaminated with MTBE. Sodium dodecyl sulfate (SDS) shows the best removal efficiency among various nonionic, cationic and anionic surfactants. Molar ratio of SDS to MTBE was the most important factor for removal of MTBE using micellar solubilization. With the ratio of more than 13, the removal efficiency was saturated to 55%.