• Clean Technology
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2020

Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.318-323
• /
• 1995

To improve wastewater treatment in a confectionery factory and to optimize chemical coagulation process, this study was performed. $COD_{Mn}$ and total solid of untreated wastewater were $200{\sim}820ppm\;and\;860{\sim}1350ppm$, respectively. Composition of total solid was sugar 40%, protein 10%, hexane-soluble 20%, and ash 30%. Turbidity at 650 nm and the amount of suspended solid (SS) showed correlation, thus turbidity could be used for the on-line measurement of SS. The most effective combination of coagulants for the removal of $COD_{Mn}$ and SS was that of $Al_2(SO_4)_3\;and\;Ca(OH)_2$. The optimal concentration of $Al_2(SO_4)_3\;and\;Ca(OH)_2$ was 480 ppm and 200 ppm, respectively. Optimal retention time of wastewater for $Al_2(SO_4)_3$ addition $Ca(OH)_2$ addition : flocculation was 2 : 2 : 10 min. Multiple treatment of $Al_2(SO_4)_3:Ca(OH)_2$ overcame coagulation inhibition by gelatin and detergent, and addition of microbial sludge reduced it.

• Applied Biological Chemistry
• /
• v.42 no.1
• /
• pp.73-78
• /
• 1999

Acid mine drainage (AMD) results from sulfuric acid produced by the oxidation of pyrite, and contains large amounts of toxic elements. In the neutralization of AMD, iron and aluminum hydroxides are the major precipitates and those two can be separated with two-phase neutralization. In this study, removal of toxic elements by the two phases of neutralization was investigated using an AMD collected from the abandoned antimony mine in Gachang, Taegu. Contents of As, Cd, Cu, Mn, Pb and Zn in the AMD were higher than the criteria of river water quality or permissible waste water discharge. In the first phase, the AMD was neutralized to several % (25, 50, 75, 100, and 125) of $Fe(OH)_3$ equivalence point with solid $Ca(OH)_2$. In the second phase, the supernatant of the first phase neutralization was titrated to pH 7.5. After neutralization of the AMD to 100% of the $Fe(OH)_3$, equivalence point, most of Fe and Pb were removed but levels of As, Cd, Cu, Ni, Mn, and Zn were not reduced in the supernatant solution. In the second phase neutralization, levels of those toxic elements in the supernatants dropped below the wastewater discharge or river water quality criteria. This result suggests that the precipitate formed in the first phase of the neutralization process may be disposed without any special cares. Thus the two-phase neutralization scheme can reduce the cost of disposing precipitates containing toxic metals in comparison with the monophase neutralization scheme.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.448-454
• /
• 2010

This study investigated the effect of PCE and TCE as electron acceptors on the bacterial composition of dechlorinating communities. The enrichment cultures reductively dechlorinating PCE and TCE were developed from three environment samples using acetate as electron donor. The cultures were prepared by sequential enrichment, which was seeded with sediment and dredged soil. Denatured gradient gel electrophresis (DGGE) of 16S rRNA gene fragment was used to compare the microbial communities of these three enrichment cultures. After incubation for 4 weeks, the removal efficiencies of PCE and TCE were highest from Yeocheon site (87.37% and 84.46%, respectively). PCE and TCE as electron acceptors affected the bacterial diversity and community profiles in the enrichment cultures. DGGE analysis showed that the dominant bacteria in PCE and TCE enrichment were belonged to Clostridium sp., Desulfotomaculum sp., and uncultured bacteria.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1851-1861
• /
• 2014

This study aims to calculate reliable sectional travel speeds with the consideration of the characteristics of the probe data collected in the interrupted traffic flow. First, in order to analysis the characteristics of the probe data, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle collected by DSRC. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. However, The comparison results show that the sectional travel speeds from the DSRC probe vehicles are not significantly different. Finally, based on the distribution characteristics of the sectional travel speeds of each probe vehicle and the representative values counted during a collection period, we drew the optimal outlier removal procedure and evaluated the estimation errors. The evaluation results showed that the DSRC sectional travel speeds were found to be similar to the observed values from actually running vehicles. On the contrary, in the case of the sectional travel speeds of intra-city bus, it was analyzed that they were less accurate than the DSRC sectional travel speeds. In the future, it will be necessary to improve BIS process and make use of the travel information on intra-city buses collected in real time to find various ways of applying it as traffic information.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.396-413
• /
• 1996

Current acceptable methods for promoting periodontal regeneration are based on removal of diseased soft tissue. root treatment, guided tissue regeneration, introduction of new graft materials and biological mediators. Insulin-like growth factor-I(IGF-I) and Platelet-derived growth factor-BB(PDGF-BB), the members of the polypeptuyde growth factor family have been reported as the biological mediators which regulate a variety cellular matrix biologic activities of wound healing process including the cell proliferation, migration and extracellular matrix synthesis.The purposes of this study is to evaluate the combination effects of IGF-I and PDGF-BB on the cellular activity of the periodontal ligament cells to act as a regeneration promoting agent of periodontal tissue. Human periodontal ligament cells were prepared from the first premolar tooth extracted for the orthodontic treatment and were cultured in DMEM containing 10% FBS at the $37^{\circ}C$, 5% CO2 incubator. Author measured the DNA synthetic activity, and total protein, collagen and noncollagenous protein synthetic activities according to the concentration of 10,100ng/ml IGF-I and1,10 ng/ml PDGF-BB in combination. The results were as follows: Significantly increased in the 1 ng/ml PDGF-BB alone compared to the 10 ng/ml PDGF-BB alone(P<0.01) and in the 1 ng/ml PDGF-BB and 10, 100ng/ml IGF-I in combination compared to the 1 ng/ml PDGF-BB alone(P<0.05, P<0.0l). The synthetic activity of the total protein and collagen is significantly increased like to the synthetic activity of the DNA(P<0.05). The synthetic activity of the noncollagenous protein is increased according to the concentration of IGF_I, but not statistically statistically significant(P>0.05). The percent of the collagen is significantly in the 1ng/ml PDGF-BB and 10ng/ml IGF-I in combination compared to the 1ng/ml PDGF-BB alone(P<0.05) and in the 10ng/ml IGF-I in combination compared to the 10ng/ml PDGF-BB alone(P<0.05). The synthetic activity of the DNA is In conclusions, the percent study shows that PDGF-BB and IGF-I in combination have a potentiality to enhance the DNA synthesis and the total protein and collagen synthesis of The periodontal ligament cells, especially it is more significant in the low concentration of PDGF-BB compared to the high one. Thus, the PDGF-BB and IGF-I in combination may have important roles in promotion of periodontal litgment healing, and consequently, may useful for clinical application in periodontal regenerative procedures.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.59-66
• /
• 2008

Purpose: It has been shown that the inorganic polyphosphate is effective for the regeneration of bones through the preliminary animal test of rabbits. The most effective concentration of the polyphosphate, however, is not known yet. Moreover, the effectiveness of carriers inside human body is not confirmed.. Materials and Methods: In this study, we examined the effect of the concentration of the inorganic polyphosphate on the process of the bone regeneration using the 6 weeks old rabbits with the weight of 2.0 kg in average. We performed the experiment using TR-ePTFE membrane(membrane) filled with collagen immersed in 4%, 8% of inorganic polyphosphate, respectively, following removal of the proper sized cortical bones from the rabbit calvaria. The experimental results were compared with the one of the following four groups: The negative control group for membrane only, the positive control group for membrane filled with collagen, the first experimental group for membrane filled with collagen immersed in 4% of inorganic polyphosphate, and the second experimental group for membrane filled with collagen immerse in 8% of inorganic polyphosphate. The fragments of the tissue with membrane obtained from each group of the sacrificed rabbits for 8 or 16 weeks sustained after surgery were then prestained by the Hematoxylin-Eosin stain and coated by resin to form non-decalcified specimens for the histologic examination and analysis. New bone formation was assessed by histomorphometric and statistical analysis. Results: 1. All groups have shown better bone regeneration at 16weeks than 8weeks. 2. Negative control group has shown more bone regeneration relative to the other groups at 8 and 16 weeks. 3. All experimental groups have shown better bone regeneration relative to positive control group. 4. At 16 weeks, the first experimental group has shown more bone regeneration compared to the second experimental group. Exophytic bone formation is not good at the first and the second experimental groups compared with negative control group. But, the use of 4% inorganic polyphosphate was more effective to bone formation than the use of 8% inorganic polyphosphate. Conclusion: With above results, it is suggested the use of inorganic polyphosphate with vehicle under TR-ePTFE membrane.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.162-169
• /
• 2008

This study was designed to investigate the effect on treatments of garlic and the improvement of lipids in dietary-induced hyperlipidemic rats. Rats were administrated 1% cholesterol to induce hyperlipidemia and were fed diets containing fresh garlic powder (FGP), steamed garlic powder (SGP) and black garlic powder (BGP) by 3% (w/w) for 4 weeks. Body weight gain and food efficiency was not significantly different between control and garlic powder fed groups. Liver weight was significantly higher in control and SGP fed groups. Blood glucose was decreased in FGP and BGP fed groups than control group. The concentration of total lipid was significantly decreased in BGP group. Total cholesterol and triglyceride of serum were significantly lower in garlic powder fed groups than control group. HDL-cholesterol was significantly higher, LDL-, and VLDL-cholesterol were significantly lower in the garlic powder fed groups than the control group. Activities of serum GOT was lower in SGP fed group than control group. Total hepatic lipid and cholesterol concentration were conspicuously decreased by garlic powder fed groups. TBARS concentration of liver was significant different for the added garlic powder administration. Antioxidant activity of liver tended to increase in garlic powder fed groups compared with control group. In this result, we suggest the preventive effect of black garlic against the atherosclerotic process and the improvement of hyperlipidemia through the removal of cholesterol.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.