• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.163-170
• /
• 2014

Lipid membranes composed of phosphatidylcholine (PC) are used in biophysical study to mimic cellular membranes and interactions between the membrane and chemicals, where organics solvents are used in dissolving lipids or chemicals. Later, solvents are removed from the solution under nitrogen gas at room temperature, followed by the further removal of the solvent at vacuum condition for several hours. In this process, some solvents are easily removed under described conditions above and others are required more severe conditions. In this study, $^{31}P$ solid-state nuclear magnetic resonance (SSNMR) techniques and differential scanning calorimetry (DSC) were used to see any changes in the line shapes of $^{31}P$ NMR spectra of multilamellar vesicles (MLVs) samples of POPC and in the phase change temperature of multilamellar vesicles (MLVs) of DPPC in DSC thermogram with or without any residual solvents. The thermodynamic parameters associated with the solvents did exhibit noticeable changes depending on solvent types. Thus, it is concluded that solvents should be carefully chosen and removed completely and experimental results should also be interpreted with caution particularly for the experiments investigating lipid phase changes and related topics.

• The Korean Journal of Zoology
• /
• v.32 no.3
• /
• pp.211-220
• /
• 1989

The fine structure of the aggregate glands-one of the capture thread producing organs-in the orb web spider, Nephila clavata L.Koch, is studied with light and electron microscopes. Gluey capture threads or sticky spirals of the orb web are originated from the silks of two flagelliform glands and four aggregate glands which are connected to the posterior spinnerets, and the arrangement fo their spigots(large spinning tubes) shows a charaterstic form called "triad". The aggregate galnd is composed of large and multilobed secretory portion and thick excretory duct surrounded by large irregular nodules. The excretory duct of the aggregate galnds basically consists of three superposed types of cells which are inner columnar epithelium, nodule-forming cells and outer connestives. The cuticles of the proximal duct near the secretory portion are composed of endocuticle and exocuticle, whereas ghe distal duct near the spinning tubes has a electron lucent subcuticle which had the functions of water removal and orientation of silk fibers. In the cytoplasmic process of the large and irregular nodule-forming cells surrounded by invaginations of the plasma membranes, numerous mitochondria and glycogen particles are contained. The maturational level of the nodule cells is perceived from the appearence of these cell inclusions. The secretory portion of the glands which porduce the secretory silk material shows two layers of the cells which are simple cuboidal epithelium and several connective layers. In the cytoplasm of the glandular epithelial cell, rough endoplasmic reticulums are well developed, and two types of secretory granules are observed. Between the adjacent epithelial cells, specialized septate junctions are formed along the plasma membranes.membranes.

• Korean Journal of Veterinary Research
• /
• v.38 no.2
• /
• pp.280-289
• /
• 1998

Voltage-sensitive ion channels contribute to establishment of the cell excitablity and the generation of the cellular function. At hamster oocytes in the primitive stage during developing process, an inward current elicited by voltage pulses was found to be carried mainly by $Ca^{2+}$. Even at present, $Ca^{2+}$ channels serve as the most probable route to pass this inward current but there is no evidence of the presence of this channels in eggs. To date, both the characteristic properties and the physiological role in the early stage of development remain unclear. Here we examined the characteristic properties of the inward current and changes in this currents at unfertilized oocytes, fertilized zygotes and two-cell embryos using whole-cell voltage clamp technique. The inward current carried reportedly by $Ca^{2+}$ was remained following removing external $Ca^{2+}$ but completely abolished by further replacement of impermeants such as tetramethylammonium ion ($TMA^+$) or $choline^+$ instead of $[Na^+]_0$. Tetrodotoxin did not affect on this inward current remained at $[Ca^{2+}]_0$-free condition. Removal of $Na^+$ ion out of the experimental solution clearly decreased the current. After adding 2mM $Ca^{2+}$ to the $Na^+$-free media, the inward current was restored. Interestingly, this current carried by either $Ca^{2+}$ or $Na^+$ was decreased by the reduction of intracellular $Cl^-$ concentration, or by $Cl^-$ channel blockers such as niflumic acid, DIDS and SITS. When $Cl^-$ concentration was lowered without changes in other ionic components, this inward current was reduced. At fertilized oocytes and two-cell embryos, the inward current carried by $Ca^{2+}$ and $Na^+$ was severely reduced. Also $Cl^-$ component could not be observed. From these results, the inward current is composed of $Ca^{2+}$, $Na^+$ and $Cl^-$ component, suggesting that the channel carrying this inward current is not selective specifically to $Ca^{2+}$. During early stage of development, the voltage-sensitive ion current seems not to contribute essentially to the cell cleavage and differentiation. The loss of $Cl^-$ component after fertilization suggests that $Cl^-$ may play a role in maintaining the viability of unfertilized ova.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.36-45
• /
• 2016

Sand filters are widely used in infiltration systems to manage polluted urban runoff. Clogging, which is mainly caused by the deposition of sediments on the filter media, reduces the filter system's infiltration capacity, which further limits its lifespan and function. The physical, chemical and biological clogging characteristics of sand filter, therefore, need to be known for effective design and maintenance. Physical clogging behavior and variations in the characteristics of sand filters according to different media depths are examined in this paper. The variations were observed from laboratory column infiltration tests conducted in a vertical flow and fluctuating head condition. It can be seen that an increase in filter media depth results in a high sediment removal performance; however, it leads to a shorter lifespan due to clogging. In the choice of filter media depth to be used in field applications, therefore, the purpose of facilities as well as maintenance costs need to be considered. At all filter media depth configurations, premature clogging occurred because sediments of 100~250 μm clogged the top 15% of filter media depth. Thus, scrapping the top 15% of filter media may be suggested as the first operational maintenance process for the infiltration system.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.114-120
• /
• 2005

The purpose of this study is to obtain practical information about membrane coupled $ A_2O$ system for muncipal wastewater treatment. A flat-plate microfiltration (MF) module with a pore size $0.25\;{\mu}m$ was submerged into the aeration basin and treated water was filtrated through the membrane by continuous suction with low pressure. The system was operated with synthetic wastewater to find operational parameters of internal recycle ratio and maximum MLSS showing best water quality and long-term stability. The internal recycle was defined as type 1 for aerobic to anoxic tank and type 2 for anoxic to anaerobic tank, respectively When the flux was maintained at $0.015\;m^3/m^2/hr$ (15 LMH) with 2Q type 1 internal recycle ratio, the optimal operational setting were 10 internal recycle ratio for type 2 and maximum MLSS of 11,000 mg/L among tested conditions. At this condition, removal efficiencies of BOD, CODcr, T-N and T-P showed $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$, respectively.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.708-720
• /
• 2020

Core-wide temperature distribution in sodium-cooled fast reactor plays a key role in its decay heat removal process, however the prediction for temperature distribution is quite complex due to the conjugate heat transfer between the assembly flow and the inter-wrapper flow. Hybrid medium model has been proposed for conjugate heat transfer modeling in the core. The core is modeled with a Realistic modeled inter-wrapper flow and hybrid medium modeled assembly flow. To validate present model, simulations for a three-assembly model were performed with Realistic modeling, traditional porous medium model and hybrid medium model, respectively. The influences of Uniform/Non-Uniform power distribution among assemblies and the Peclet number within the assembly flow have been considered. Compared to traditional porous medium model, present model shows a better agreement with in Realistic modeling prediction of the temperature distribution and the radial heat transfer between the inter-wrapper flow and the assembly flow.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.21-31
• /
• 1998

A study on the acid leaching and precipitation has been conducted to remove arsenic from the closed-mine tailings. HCI and H$_2$SO$_4$were used as the leach liquor of arsenic and the tailing obtained from the Da-Duck Mine, which was already closed several decades ago, was also used as the source of arsenic. The effect of the concentration of acid, leaching time and the slurry density on the leaching efficiency of arsenic has been examined. In addition, pH controls and the addition of sodium sulfide were also attempted to remove the arsenic compound as the precipitation from the leachate. After 1 hr leaching by HCI, 40 to 86% of arsenic was leached out depending on the concentration of acid or the slurry density while 47 to 77% of it was leached out by $H_2$$SO_4$. The leaching of arsenic by both acids was almost accomplished within 10 min. and after that only a slight increase in leaching efficiency was observed with leaching time. When the leach liquor was used repeatedly for the leaching of arsenic, the concentration of arsenic in the leach liquor was found to increase continuously although the leaching efficiency was diminished. As far as the precipitation of arsenic in the leachate was concerned, more than 99% of arsenic could be precipitated through the addition of sodium sulfide as the precipitator while the pH controls resulted in the precipitation of up to 84%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.243-248
• /
• 2011

In this paper, we propose a new method to extract palm lines and read it with simple techniques from one photo. We use morphological information and 8-directional contour tracking algorithm. From the digitalized image, we transform original RGB information to YCbCr color model which is less sensitive to the brightness information. The palm region is extracted by simple threshold as Y:65~255, Cb:25~255, Cr:130~255 of skin color. Noise removal process is then followed with morphological information of the palm such that the palm area has more than quarter of the pixels and the rate of width vs height is more than 2:1 and 8-directional contour tracking algorithm. Then, the stretching algorithm and Sobel mask are applied to extract edges. Another morphological information that the meaningful edges(palm lines) have between 10 and 20 pixels is used to exclude noise edges and boundary lines of the hand from block binarized image. Main palm lines are extracted then by labeling method. This algorithm is quite effective even reading the palm from a photographed by a mobile phone, which suggests that this method could be used in various applications.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.221-230
• /
• 2005

Catalytic wet oxidation of trichloroethylene (TCE) in water has been conducted using $TiO_2-supported$ cobalt oxides at $36^{\circ}C$ with a weight hourly space velocity of $7,500\;h^{-1}.\;5\%\;CoO_x/TiO_2$, prepared by using an incipient wetness technique, might be the most promising catalyst for the wet oxidation although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. XPS spectra of both fresh and used Co surfaces gave different surface spectral features for each $CoO_x,\;Co\;2P_{3/2}$ binding energy for Co species in the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $CO_2TiO_4\;and\;CoTiO_3$. The used catalyst exhibited a 780.3-eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD patterns for $5\%\;CoO_x/TiO_2$ catalyst indicated that the phase structure of Co species in the catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present predominantly on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.