• 한국건설관리학회논문집
• /
• 제6권3호
• /
• pp.72-80
• /
• 2005

최근 재건축에 대한 규제가 강화됨에 따라 리모델링에 대한 관심이 높아지고 있는 추세이며, 기존 아파트의 경우에도 발코니 확장 등을 목적으로 내력벽을 철거하는 등 아파트 평면에 대한 변경사례가 증가하고 있다. 그러나 이와 같은 평면변경에는 구조안전에 대한 검토가 반드시 수반되어야 함에도 불구하고 이에 대한 인식은 크게 부족하며, 리모델링과 관련한 기존의 연구도 대부분 경제성 향상 측면에 초점을 맞추고 있어 구조적 안전성 측면에서의 연구는 부족한 실정이다. 이에 본 연구에서는 최근 진행되고 있는 리모델링 사례 및 국내 대형 건설사들의 아파트 평면분석을 통해 아파트 평면변경에 수반되는 평면변경요소를 추출하고 이의 적용에 따른 구조요소별 응력변화 영향을 분석하였다. 분석 결과, 벽체축력은 독립 벽체를 제거하였을 때, 슬래브 모멘트는 ㄱ자형 벽체를 맞닿은 수직벽체와 함께 제거하였을 때 가장 불리한 결과를 초래하는 것으로 나타났다. 본 연구의 결과는 리모델링이나 발코니 확장 등 평면변경을 목적으로 벽체를 제거함으로 인해 유발되는 벽체와 슬래브의 응력변화를 예측하고 평가하는데 활용할 수 있을 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.401-402
• /
• 2023

The shear connection of the vertical construction joint of a slurry wall by the concrete shear key has excellent structural performance and is economical and eco-friendly. However, technology for forming concrete shear keys in the underground is still underdeveloped. This paper proposes the development of the construction technology required to form a concrete shear key at the vertical construction joint of the slurry wall.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.451-460
• /
• 2010

리모델링에는 여러 형태가 있을 수 있다. 그 중 건축주나 리모델링 수행자가 선호하는 방법이 두 개의 주거 공간을 하나로 만들어 평면 확장을 목표로 하는 세대 병합형 리모델링이다. 그러나 이러한 방법을 현재 국내에서 리모델링 대상이 되고 있는 벽식 구조의 아파트에 적용할 경우 주요 횡력 저항 요소인 전단벽에 큰 손상을 가하게 될 수 있다. 그러나 아직 이러한 주요 구조 부재인 철근콘크리트 전단벽에 개구부가 발생할 경우의 명확한 손상 정도를 정의 해주는 연구는 진행되고 있지 않은 실정이다. 현행 ACI 기준은 이러한 철근콘크리트 전단벽 내의 개구부에 대한 명확한 고려 방안을 제시하지 않고 있다. 반면 AIJ 기준은 철근콘크리트 전단벽 내부의 벽체에 대한 고려 방안으로 강도 저감률 $\gamma$를 제시하고 있다. 그러나 이 강도 저감률은 탄성 판 이론으로부터 제시된 것으로 철근콘크리트 부재에 있어서의 강도 저감률을 제대로 표현하지 못하고 있는 실정이다. 그러므로 이 연구에서는 AIJ에서 제시하고 있는 강도 저감률 $\gamma$에 대하여 현재까지 진행되었던 실험 결과에 대한 통계적 분석과 유한요소해석을 통한 변수 분석을 통해 개구부에 의한 강도 저감률에 대한 연구를 수행하였다. 통계적 분석 결과 현재 제시되어 있는 강도 저감률은 개구부의 벽체 면적에 대한 비율만을 변수로 설정하여 그 저감률이 실험 결과보다 크게 나타나고 있었다. 또한 개구부의 형상비를 면적과 통합적으로 고려하며 철근비에 대한 고려를 하지 못하는 것으로 나타났다. 이에, 기존의 실험 결과와 이를 토대로한 유한요소해석을 통한 변수분석을 수행하여 새로운 강도 저감률을 제안하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.105-109
• /
• 1998

1. Introduction : In microfiltration the transport, deposition and removal of particles control cake formation on a filter. In this connection a new model on cake formation, based on the wall shear stress, was tested here in comparison with experiments of fine particle slurry under Taylor-vortex flow. The model expresses the deposition process for particles as two first-order steps in series of mass transfer and adhesion, and their removal process as a linear relation to the wall shear stress. This embraces characteristics of both dead-end and crossflow filtration. The correlation resulting from fitting to experimental data represented the experimental data reasonably well. This study will be helpful in analyzing fouling in heat exchangers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.241-242
• /
• 2013

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.109-123
• /
• 2021

This research endeavor intends to use the implicit finite element method to investigate the structural response of steel shear walls with partial plate-column connection. To this end, comprehensive verification studies are initially performed by comparing the numerical predictions with several reported experimental results in order to demonstrate the reliability and accuracy of the implicit analysis method. Comparison is made between the hysteresis curves, failure modes, and base shear capacities predicted numerically using ABAQUS software and obtained/observed experimentally. Following the validation of the finite element analysis approach, the effects of partial plate-column connection on the strength and stiffness performances of steel shear wall systems with different web-plate slenderness and aspect ratios under monotonic loading are investigated through a parametric study. While removal of the connection between the web-plate and columns can be beneficial by decreasing the overall system demand on the vertical boundary members, based on the results and findings of this study such detachment can lower the stiffness and strength capacities of steel shear walls by about 25%, on average.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.23-26
• /
• 2001

Batch test and column test were performed to develop the design factors for PRBs against the contaminated groundwater by ammonium and lead. Clinoptilolite, one of the natural zeolites having excellent cation exchange capacity(CEC), was chosen as the reactive material through the ion-exchange mechanism. In the batch test, the reactivity of Clinoptilolite to ammonium and lead was examined with varying the particle size of Clinoptilolite. The nit weight of Clinoptilolite showed removal efficiencies of 65 % against the ammonium and 98% against lead. The effect of particle size of Clinoptilolite was not noticeable. In the column test, the permeability was examined using flexible-wall permeameters with varying the particle size of Clinoptilolite. When the washed Clinoptilolite having the diameter of 0.42-0.85 nm was mixed with Jumunjin sands in 20:80 ratio (w/w), the highest permeability of 2$\times$10$^{-3}$ -7 x 10$^{-4}$ cm/s was achieved. The reactivity and the strength property of the mixed material were investigated using fixed wall column having 8 sampling ports on the wall and the direct shear test, respectively. Clinoptilolite was found to be a suitable material for PRBs against the contaminated groundwater with ammonium and/or heavy metals.

• 한국농촌건축학회논문집
• /
• 제24권2호
• /
• pp.13-20
• /
• 2022

In this study, a general low-rise building was selected to compare the new shear wall reinforcement method, which is a general method among the existing reinforcement methods, and the reinforcement method using sinusoidal corrugated web reinforcement. And it was confirmed that the following effects can be expected. Sinusoidal corrugated web members can be carried out in a short period of time as it does not require the removal of the masonry filling wall, the reinforcement of reinforcing bars, and the curing period of the concrete. It is effective in preventing damage that may occur when masonry filling wall is overturned in the out-of-plane direction, and the burden of the foundation is also reduced, and thus the construction period and cost required for reinforcement can greatly be reduced. By adjusting the number of sinusoidal corrugated web member, details of joints, and reinforcement positions, the flow of load can be induced to have an advantageous effect on the building. It can be considered as the most suitable reinforcement plan in terms of life safety. Unlike the shear wall that fills between the columns, the sinusoidal corrugated web members, which has a width of 1.5m, can install openings between two columns depending on the purpose of use, and can be expected to have a great effect in terms of usability due to its free installation location. As mentioned above, the seismic reinforcement using a sinusoidal corrugated web members, can expect great effect compared to conventional reinforcement methods in terms of usability, economic feasibility, and stability.

• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.41-46
• /
• 2007

Dynamic behavior of immiscible gas bubble attached to the wall in channel flow plays very important role in many engineering applications. Special attention has been paid to micro direct methanol fuel cell(${\mu}$DMFC) where surface tension becomes dominant factor with minor gravitational effect due to its reduced size. Therefore, displacement of $CO_2$ bubble generating on a cathode side in ${\mu}$DMFC can be very difficult and efficient removal of $CO_2$ bubbles will affect the overall machine performance considerably. We have focused our efforts on studying the dynamic behavior of immiscible bubble attached to the one side of the wall on 2D rectangular channel subject to external shear flow. We used Level Contour Reconstruction Method(LCRM) which is the simplified version of front tracking method to track the bubble interface motion. Effects of Reynolds number, Weber number, advancing/receding contact angle and property ratio on bubble detachment characteristic has been numerically identified.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.12-18
• /
• 2019

Fluid jet polishing is a method of jetting a fluid to polish a concave or free-form surface. However, the fluid jet method is difficult to form a stable polishing spot because of the lack of concentration. In order to solve this problem, MR fluid jet polishing system using an abrasive mixed with an MR fluid whose viscosity changes according to the intensity of a magnetic field is under study. MR fluid jet polishing is not easy to formulate for precise optimal conditions and material removal due to numerous fluid compositions and process conditions. Therefore, in this paper, quantitative data on the factors that have significant influence on the machining conditions are presented using various simulations and the correlation studies are conducted. In order to verify applicability of the fabricated MR fluid jet polishing system by nozzle diameter, the flow pattern and velocity distribution of MR fluid and polishing slurry of MR fluid jet polishing were analyzed by flow analysis and shear stress due to magnetic field changes was analyzed. The MR fluid of the MR fluid jet polishing and the flow pattern and velocity distribution of the polishing slurry were analyzed according to the nozzle diameter and the effects of nozzle diameter on the polishing effect were discussed. The analysis showed that the maximum shear stress was 0.45 mm at the diameter of 0.5 mm, 0.73 mm at 1.0 mm, and 1.24 mm at 1.5 mm. The cross-sectional shape is symmetrical and smooth W-shape is generated, which is consistent with typical fluid spray polishing result. Therefore, it was confirmed that the high-quality surface polishing process can be stably performed using the developed system.