• 한국물환경학회지
• /
• 제16권4호
• /
• pp.533-539
• /
• 2000

A bench-scale reactor using SBR process was experimented with an synthetic wastewater. The main purpose of this investigation was to evaluate applicability in the field and process removal efficiencies in terms of BOD and T-P and its corresponding kinetic parameters. Removal rate of phosphorus was 77% in terms of total phosphorus. Effluent concentrations were $9.8mg/{\ell}$ BOD and $1.1mg/{\ell}$ T-P. Effluent quality was maintained consistently stable by controlling decant volume and operating cycles. The efficiency for phosphorus removal was increased due to decrease in BOD-SS loading value in the range of $0.25{\leq}$aeration time ratio${\leq}0.52$.

• 대한환경공학회지
• /
• 제32권1호
• /
• pp.17-22
• /
• 2010

본 연구의 목적은 대형 석탄 화력 발전소에 DSI (Dry Sorbent Injection)공정을 실제 적용 할 경우에 실현 가능성에 대한 연구로서 N 발전(주)의 S 화력발전본부에서 운용중인 500MW급 석탄화력 발전시설의 보일러 후단에서 전기 집진기 전 단까지를 모델로 삼아 Lab-scale 실험장치를 제작하여 탈황효율을 높이기 위한 실험을 수행하였다. 이를 위하여 Lobedplate와 Step-plate라는 혼합촉진장치를 고안하고 각각 형상을 달리하여 궁극적으로 탈황효율을 높이기 위한 혼합촉진장치의 최적 형상도출을 위한 실험을 수행하였으며 부수적으로 탈황제의 분사구의 개수에 따른 탈황효율 또한 분석하였다. 그 결과 혼합촉진장치가 설치된 경우가 더 높은 탈황 효율을 나타내었고 형상에서는 계단형상일 경우 가장 높은 탈황효율을 보였다. 또한, 탈황제의 분사구의 개수에 따른 탈황효율은 혼합 촉진 장치가 설치되지 않은 경우, 분사구의 개수가 증가할수록 높은 탈황 효율을 보였으나 혼합촉진장치가 설치된 경우는 분사구의 개수가 4개일 경우가 이론적 결과와 같이 가장 높은 탈황효율을 나타내었다.

• 자원환경지질
• /
• 제43권1호
• /
• pp.33-42
• /
• 2010

마을상수도 지하수의 라돈의 자연저감 정도를 파악하기 위하여 6개 지점을 대상으로 지하수공의 제원, 저수조의 크기, 지하수 사용량, 원수로부터 꼭지수까지의 거리를 측정하고 원수와 3개 꼭지수의 라돈함량을 분석하고 비교하였다. 5개 마을상수도 지하수(A-E)에서 2회에 걸친 원수와 꼭지수의 라돈 자연저감은 2006년 11월에는 26.0%, 2006년 12월에는 45.6%로 나타나 계절별 지하수 사용량에 따른 자연저감율에 차이가 있는 것으로 나타났다. 그러나 마을상수도 F에서 2007년 4월 일주일 간격으로 3회 분석된 꼭지수의 라돈함량은 원수의 44.1-49.0%로 나타나 단기간에 걸친 라돈 자연저감에는 큰 변화가 없는 것으로 나타났다. 한편 꼭지수에서의 라돈의 저감은 원수로부터의 거리, 저수조의 크기보다는 지하수의 사용량에 더 영향을 받는 것으로 나타났다.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.383-390
• /
• 2011

In this study, a process combined biofiltration with sulfur-utilizing autotrophic denitrification and membrane separation was proposed to examine the efficiency of nitrogen removal. As an experimental device, hollow-fiber module was installed in the center of reactor to generate the flux forward sulfur layer in the cylinder packed with granular sulfur. In addition, a simple module was installed in activated sludge aeration tank which inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. The experiment for developing new MBR process was carried out for three years totally. As the results of first two-year experiment, successful nitrogen removal performance was revealed with lab-scale test and pliot scale plant using artificial wastewater and actual plating wastewater. In this year, pilot scale test using actual domestic wastewater was performed to prove field applicability. As the results, high-rate nitrogen removal performance was confirmed with about 0.19 kg ${NO_3}^--N/m^3$ day of rate. Also significant fouling and pressure increase were not found during the experiment. And, the production ratio of sulfate and the consumption ratio of alkalinity showed a slightly higher value about 311 mg ${SO_4}^{2-}/L$ and 369 mg $CaCO_3$/L, respectively. In conclusion, the developed MBR process can be utilized as an alternative for retrofiting existing wastewater plants as well as new construction of advanced sewage wastewater treatment plants, with cost-effective merit.

• 한국광물학회지
• /
• 제19권2호
• /
• pp.111-121
• /
• 2006

금속 조합을 이용하여 배관내벽에 형성된 스케일의 제거 및 억제 가능성과 광물학적 특성을 연구하기 위하여 주사전자현미경, 방안실체현미경, 선회절분석, 스케일 제거실험을 실시하였다. 배관내벽에 생성된 스케일은 대부분 철광물로 구성되어있으며 약간의 Si와 Ca 광물을 포함하고 있다. 배관내벽의 스케일을 제거하는 데 내부 금속을 Mg, 외부금속을 황동으로 실험하였을 때 가장 좋은 효과를 나타낸다.

• Membrane and Water Treatment
• /
• 제2권2호
• /
• pp.121-136
• /
• 2011

A bench-scale test has recently been proposed as a predictive tool to minimize the scope of pilot-scale testing or to optimize the operation of full-scale membrane filtration systems. Consequently, a bench-scale testing unit was developed for this purpose and systematically evaluated in this study. This unit was capable of accommodating commercially available, low pressure, hollow fiber (LPHF) membranes with various configurations for testing under conditions comparable to real-world applications. Reproducibility of this unit in assessing membrane fouling and microbial removal efficiency of LPHF membranes was tested and statistically comparable results were obtained. This unit serves as a useful apparatus for academic researchers and utilities to evaluate the performance of LPHF membranes used for water treatment.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.157-162
• /
• 2001

Jet Bubbling Reactors(JBRs) were operated for the removal of SO$_{x}$ in flue gases produced from many electric power plants. However, many JBR flue gas desulfurization (FGD) facility faced a decrease of SO$_{x}$ removal efficiency and an increase of scale problems with continuous operations. We increased alkalinity of the SO$_{2}$ absorbing medium by adding the dibasic acids (DBAs) to solve these problems more effectively. The SO$_{2}$ removal efficiency, the purity of CaCO$_{3}$ and COD of the wastewater was measured to identify the addition effects of DBAs (150, 200, 250, and 400 ppm) for 2hr in a day into the JBR attached to the large-scale power plants (400 MW$\times$3). Addition of the DBAs resulted in the improvement of the SO$_{2}$ removal efficiency from 2 to 5% and the purity of the gypsum from 1 to 2%; these improvement were due to the alkalinity increase of the absorbing medium and the reduction of a proportion of un-reacted CaCO$_{3}$, respectively. Also, the scale problems formed by un-reacted CaCO$_{3}$ inside the reaction zone of the JBR were substantially reduced. Even though the effluent COD of the wastewater slightly increased from 10~15 to 18~36 mg/l and the erosion problems in the injection pump and duct occurred, this method of increasing SO$_{2}$ removal efficiency by adding the DBAs could be considered as a profitable approach.ach.

• 여성건강간호학회지
• /
• 제24권2호
• /
• pp.163-173
• /
• 2018

Purpose: To identify factors influencing psychosocial adjustment in patients with surgical removal of benign breast tumor. Methods: With a survey design, data were collected using the Psychosocial Adjustment to Illness Scale-Self Report (PAIS-SR), Body Image Scale, Physical Discomfort Scale, and Family Support Scale with patients who had had surgical removal of a benign breast tumor from September to November 2017. Data were analysed with descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients, and stepwise multiple regression. Results: The mean scores for physical discomfort, body image, family support, and psychosocial adjustment were $1.57{\pm}0.51$, $0.37{\pm}0.64$, $3.62{\pm}0.67$, and $4.00{\pm}0.45$, respectively. Family support, body image, physical discomfort, number of surgical removal of benign breast tumor (twice), and cancer insurance status (yes) were verified as factors influencing psychosocial adjustment. These factors accounted for 57.4% of psychosocial adjustment. Conclusion: In this study, family support, body image, and physical discomfort were identified as significant predictors of psychosocial adjustment. Therefore, this study can be used as fundamental data to develop nursing intervention strategies in order to increase psychosocial adjustment in patients with surgical removal of a benign breast tumor.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.121-128
• /
• 2006

The interaction between adherent molecules and gas molecules was modeled in the molecular scale and simulated by the molecular dynamics method in order to understand evaporation and removal processes of adherent molecules on metallic surface using high temperature gas flow. Methanol molecules were chosen as adherent molecules to investigate effects of adhesion quantity and gas molecular collisions because the industrial oil has too complex structures of fatty acid. Effects of adherent quantity, gas temperature, surface temperature and adhesion strength for the evaporation rate of adherent molecules and the molecular removal mechanism were investigated and discussed in the present study. Evaporation and removal rates of adherent molecules from metallic surface calculated by the molecular dynamics method showed the similar dependence on the surface temperature shown in the experimental results.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.418-427
• /
• 2015

This study was carried out to evaluate the performance of a lab-scale novel septic tank system for improving the conventional septic tank in the developing countries of water shortages. The lab-scale novel septic tank system consists of sepetic tank, aeration tank with HBC-ring, and sand filter. Optimum HRT was reguired about 1.5days to get a total COD removal efficiency of 90%, COD, BOD and SS removal efficiency was about 70%, 60%, and 85% in sepetic tank only. The structure of sepetic tank with two stages results in the high removal efficiency of organic matter. When sepetic tank, aeration tank, and sand filter were more than HRT 1.5days, 18hrs, and 12hrs, respectively, final effluent was less than 20 mg/L of BOD, 14 mg/L of SS, so that there is a high potential of its use for reusing water in flush toilet. There is no significant effect of HRT change on nutrient removal. Total nitrogen removal efficiency was about 40%, final effluent was 30~40 mg/L of TN, total phosphorus removal efficiency was about 11~25%, final effluent was 9~12 mg/L of TP. Because there is very small amounts of organic nitrogen and phosphorus in effluent, it was possible to reuse water for agricultural use.