• 대한환경공학회지
• /
• 제28권7호
• /
• pp.738-745
• /
• 2006

본 연구에서는 염색폐수의 색도제거 기전을 미생물 floc에의 물리 화학적 흡착과 미생물의 대사에 의한 생물학적 제거의 두 가지로 분류하였다. 색도제거의 반응 조건, 즉 혐기/호기 조건, cosubstrate의 종류와 주입량 등을 회분식 실험에 의해 규명하고, 활성슬러지와 비활성슬러지의 biosorption 실험을 통하여 색도제거 기전을 확인하였다. 염색폐수의 색도는 호기조건과 혐기조건에서 각각 102 ${\Delta}$unit/g MLSS, 123 ${\Delta}$unit/g MLSS가 제거되어 혐기조건에서의 제거율이 높았으며, 유기물은 호기조건에서 82 $mg{\Delta}$COD/gMLSS, 혐기조건에서 75 $mg{\Delta}$COD/gMLSS 제거되어 호기조건에서 제거율이 더 높게 나타났다. Cosubstrate로서 실폐수인 가정하수와 acetate를 이용하여 주입량에 따른 염색폐수의 제거능을 분석한 결과, cosubsrate의 주입에 따라 색도 및 유기물 제거량이 증가함을 확인하였으며 가정하수보다는 acetate가 색도제거에 있어서 더 효율적인 cosubstrate임을 알 수 있었다. 활성슬러지와 멸균된 비활성슬러지를 이용한 색도제거 실험 결과. 비활성슬러지의 색도제거량은 가정하수의 주입에 따라 $20.3{\sim}37.3$ ${\Delta}$unit/g MLSS, 활성슬러지는 $102.0{\sim}159.0$ ${\Delta}$unit/g MLSS로 나타났다. 또한 반응 초기에는 물리 화학적 흡착이 우세하였으나 시간이 지나면서 생물대사 작용에 의한 제거가 증가하는 경향을 보였으며, cosubstrate의 주입에 따른 미생물의 대사에 의한 제거분율이 증가하는 것으로 분석되었고, 이는 호흡율 측정결과와도 그 경향이 일치하였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.13-16
• /
• 2002

A comparison of the functional components underlying photoperiodism and circadian rhythmicity in the same species is an interesting issue in the context of unravelling clock mechanisms. In the present study, covering or surgical removal of the compound eyes was performed to localize photoreceptors for photoperiodism to control reproductive diapause and for entrainment of circadian locomotor rhythms in the blow fly Protophormia terraenovae. Intact flies showed a long-day photoperiodic response. When the compound eyes were covered by silver paint, diapause incidence increased under diapause-averting conditions of a long-day photoperiod and constant light, as if flies were kept under constant darkness. Covering of a medial region of the head capsule or solvent painting of the compound eyes gave no significant effects. When the compound eyes were removed, flies did not distinguish the photoperiod, whereas removal of antennal lobes or ocelli did not affect the photoperiodism. Intact flies showed a freerunning rhythm under constant darkness. The rhythm entrained to light-dark (LD) cycles with light of high and low intensity. When the compound eyes and ocelli were surgically removed, the rhythm entrained to LD cycles with light of high intensity but freeran under LD cycles with light of low intensity. The results suggest the retinal pathways are involved in photoperiodism and that flies use both retinal and extraretinal pathways for rhythm entrainment. Under dim light-LD cycles, the retinal pathways mainly mediate rhythm entrainment. Retinal photoreceptors seem to be used both for photoperiodism and entrainment of the rhythm.

• 한국수정란이식학회지
• /
• 제26권4호
• /
• pp.287-296
• /
• 2011

Mammalian fertilization is a complex cascade process consisting of sperm migration through the female reproductive tract, physiological changes to sperm such as sperm capacitation and acrosome reaction, and sperm-egg interaction in the oviduct in vivo. On the other hand, in vitro fertilization (IVF) is a process by which egg cells are fertilized by sperm outside the body: in vitro. IVF has been used for a variety of purposes in reproductive biotechnology for human and animals. The discovery of sperm capacitation in 1951 promoted the development of IVF technology. In the initial stage of IVF, sperm capacitation in preincubation medium was shown to be essential to fuse with eggs. Besides, sperms should detour some of the in vivo regulations for IVF. This review introduces a general mammalian fertilization process, including sperm capacitation, removal of cumulus matrix, acrosome reaction, and sperm-egg fusion and focuses on the roles of key biochemical molecules, signal mechanisms, and genes involved during IVF and novel results of sperm-oocyte interaction elucidated in various gene-knockout mice models.

• 한국토양비료학회지
• /
• 제45권4호
• /
• pp.593-601
• /
• 2012

Heavy metals and metalloids removal can be considered as one of the most important world challenges because of their toxicity and direct impact on human health. Many processes have been introduced but biological processes of remediation seem to offer the most suitable solution in terms of efficiency and low cost. Actinobacteria constitute one of the major microbial populations in soil, and this can be attributed to their adaptive morphological structure as well as their exceptional metabolic power. Among microbes, actinobacteria are morphologic intermediate between fungi and bacteria. Studies on microbial diversities in metal contaminated lands have shown that actinobacteria may constitute a dominantly active microbiota in addition to ${\alpha}$ Proteobacteria. Furthermore, isolation studies have shown metal removal mechanisms which are reminiscent of notable multiresistant strains, such as Cupriavidus metallidurans. Apart from members of genus Streptomyces, which produce more than 90% of commercialized antibiotics, and the nitrogen fixing Frankia, little attention has been given to other members of this phylum. This is because of difficult culture condition requirements and maintenance. In this review, we focused on specific isolation of actinobacteria and their potential applications in metal bioremediation and plant growth promotion.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.

• 상하수도학회지
• /
• 제11권2호
• /
• pp.76-93
• /
• 1997

Activated carbon is widely used for the treatment of water, wastewater and other liquid wastes. Biological activated carbon (BAC) process is water and wastewater treatment process developed in the 1970's. In addition to activated carbon adsorption, biodegradation organic pollutants occurs in the BAC bed where a large amount of aerobic biomass grows. This results in a long operation time of the carbon before having to be regenerated and thus a low treatment cost. Although the BAC process has been widely used, its mechanisms have not been well understood, especially the relationship between biodegradation and carbon adsorption, whether these two reactions can promote each other or whether they just simultaneously exist in the BAC bed. Also, the phenomenon of bioregeneration has been confused that previously occupied adsorption sites appear to be made available through the actions of microorganisms. And that, because biological process is influenced by low temperature, the mechanism of the BAC process is also effected by temperature variation in our country of winter temperature near the freezing point. Therefore, the objective of this study examines closely the mechanism of the BAC process by temperature variation using phenol as substrate. From this study, biological activated carbon is good substrate removal better than non adsorbing materials (charcoal, sand) as temperature variation, especially low temperature(near $5^{\circ}C$).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.310-313
• /
• 2002

Structures obtained with a direct boning of two FZ silicon wafers joined in such a way that a smooth surface of one wafer was attached to the grooved surface of the other were studied. A square net of grooves was made with a conventional photo lithography process. After high temperature annealing the appearance of voids and the rearrangement of structural defects were observed with X-ray diffraction topography techniques. It was shown that the formation of void free grooved boundaries was feasible. In the cases when particulate contamination was prevented, the voids appeared in the grooved structures could be eliminated with annealing. Since it was found that the flattening was accompanied with plastic deformation, this deformation was suggested to be intensively involved in the process of void removal. A model was proposed explaining the interaction between the structural defects resulted in "a dissolution" of cavities. The described processes may occur in grooved as well as in smooth structures, but there are the former that allow to manage air traps and undesirable excess of dislocation density. Grooves can be paths for air leave. According to the established mechanisms, if not outdone, the dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.495-505
• /
• 2016

Mesoporous MCM-41 was deposited on an inexpensive disk shaped ceramic support through hydrothermal technique for ultrafiltration of $Fe^{3+}$ from aqueous solution. The ceramic support was fabricated using uni-axial compaction technique followed by sintering at $950^{\circ}C$. The characteristics of MCM-41 powder as well as the composite membrane were examined by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), porosity and pure water permeation test. The XRD result revealed the good crystallinity and well-resolved hexagonally arranged pore geometry of MCM-41. TGA profile of synthesized MCM-41 zeolite displayed the three different stepwise mechanisms for the removal of organic template. The formation of MCM-41 on the porous support was verified by FESEM analysis. The characterization results clearly indicated that the accumulation of MCM-41 by repeated coating on the ceramic disk directs to reduce the porosity and pore size from 47% to 23% and 1.0 to $0.173{\mu}m$, respectively. Moreover, the potential of the fabricated MCM-41 membrane was investigated by ultrafiltration of $Fe^{3+}$ from aqueous stream at various influencing parameters such as applied pressure, initial feed concentration and pH of solution. The maximum rejection 85% was obtained at applied pressure of 276 kPa and the initial feed concentration of 250 ppm at pH 2.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.57-62
• /
• 1998

In this research, the removal or uptake of heavy metals such as coppers by using oxalic acid metabolism of wood rot fungi, Tyromyces palustris were endeavored. As results, the addition of oxalic acid to copper containing culture did not cause the mycelium growth, but Tyromyces palustris was able to grow in this culture without inhibition. Tyromyces palustris grew with the cicular halo type in copper containing culture, and this type was formed as collectives after examining by microscope, and considered as copper oxalates by analyzing FT-IR comparison experiment with standards. According to this result, Tyromyces palustris has secreted oxalic acid during incubation, this secreted oxalic acid was combined with coppers, and formed copper oxalates by chelating reactions. In other words, the oxalic acid was might be as non-toxifying agent of coppers in medium. By using this copper removal mechanisms, Tyromyces palustris immobilized sawdust was used in bench scale air lift system for removing coppers. The added coppers were almost removed from the system within 72hrs. Therefore, this nonenzymatic wood degradation mechanism may give a possibility for removing coppers from copper containing waste water.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.216-219
• /
• 2023

This study employs molecular dynamics simulations to investigate the material behavior of workpieces in waterjet machining processes. To gain fundamental insights into waterjet machining, simulations were conducted using pure water, excluding abrasive particles. The simulation model comprised thousands of water molecules interacting with a single crystal metal workpiece. Water molecule clusters were imparted with various velocities to initiate collisions with the metal workpiece. The material behavior of the metal surface was analyzed with respect to the applied velocity conditions, considering the intricate interplay between water molecules and the workpiece at the atomic scale. The results demonstrated that the machining of the metal workpiece occurred only when water molecules were endowed with velocities above a certain threshold. In cases where energy was insufficient, the metal workpiece exhibited a slight increase in surface roughness due to mild plastic deformation, without undergoing substantial material removal. When machining occurred, the ejection of material revealed a 3-fold symmetric pattern, confirming that material removal in waterjet machining of the metal workpiece is primarily driven by plastic deformation-induced material ejection. This research provides crucial insights into the mechanisms underlying waterjet machining and enhances our understanding of material behavior during the process. The findings can be valuable in optimizing waterjet machining techniques.