• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.173-182
• /
• 2002

We investigated the effects of operating variables, such as electrical. reactor and gas parameters on toluene removal and discharge property in the dielectric barrier discharge (DBD) process. The toluene removal was initiated with the energy transfer to the reactor by loading of voltages higher than the discharge onset value. The energy transfer and toluene removal increased with the applied voltage. Higher removal rate was observed with smooth surface electrode despite of lower energy transfer compared with the coarse electrode, because more uniform discharge can be obtained on smooth surface state. The decrease of dielectric material thickness enhanced the removal efficiency by increasing the discharge potential. The toluene removal efficiency decreased with the increase of the inlet concentration. The increase of gas retention time enhanced the removal efficiency by the increase of energy density. The oxygen and humidity contents seem to exert significant influences on the toluene removal by dominating the generation of electrons, ions, and radicals which are key factors in the removal mechanism.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.413-416
• /
• 2003

Micellar enhanced ultrafiltration(MEUF) is a surfactant-based separtaion technique which can remove dissolved organics or multivalent ions from water. In this study, trichloroethylene(TCE) and chromate were simultaneouly removed using MEUF and cetyltrimethylammoniun chloride (CPC) was used as a surfactant. The removal efficiency of chromate was 99% and that of TCE was more than 80%. The presence of TCE or chromate did not affect removal efficiency of each pollutants because the predominat mechanism of TCE and chromate are different.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.151-157
• /
• 2002

갈색부후균 Tyromyces palustris를 이용하여 CCA, CCFZ처리 목재에서 구리를 제거하였다. 균에 의한 구리의 제거효율을 높이기 위한 전처리 방법으로서 증기압처리와 수산처리를 검토하였으며, 적정 배양 방법을 찾기 위하여 진탕배양, 고체배양, 정치배양에서 구리 제거율을 비교하였다. 전처리 방법에서, 증기압 처리만으로는 효과적인 구리제거가 불가능하였으며, 수산처리는 구리제거율은 낮았으나 수산처리 후 균처리를 하면 제거율이 향상되었다. 배양 방법에서는 정치 배양의 구리 제거효율이 높게 나타났다. 대량 배양을 위한 공기부양식 생물반응기에 의한 구리의 제거율은 7일 배양 이후 61%의 제거율을 보였다. T. palustris에 의한 구리제거기작을 탐색하기 위하여 배양액 중에 생성된 물질을 LC/Mass 분석 결과 T. palustris에서 분비되어진 수산과 방부처리 목재 중의 구리가 결합된 수산구리 착염체의 형성이 배양액 중에 존재함이 확인됨으로 균체 외 수산의 작용이 처리재의 구리제거에 크게 관여함이 밝혀졌다.

• 대한환경공학회지
• /
• 제32권8호
• /
• pp.774-779
• /
• 2010

염기도에 따라 제조된 PACl 응집제에 함유된 Al 가수분해종의 분석결과, 염기도 증가에 따라 단분자성 Al종이 감소하고 고분자성 Al종은 증가하였으며, 염기도 2.2에서 가장 많은 고분자성 Al종을 함유하고 있었다. 단분자성 또는 저분자성 Al 가수분해종을 주로 함유하고 있는 alum과 r=0인 PACl에서 인의 제거효율이 가장 높은 것으로 나타나, 효율적인 인의 제거를 위해서는 단분자성이나 저분자성 Al 종을 많이 함유한 응집제가 더 효과적이라고 판단된다.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.29-33
• /
• 2008

Rapid increase of integrity for recent semiconductor industry highly demands the development of removal technology of contaminated particles in the scale of a few microns or even smaller. It is known that the surface cleaning technology using $CO_2$ snow has its own merits of high efficiency. However, the detailed removal mechanism of particles using this technology is not yet fully understood due to the lack of sophisticated research endeavors. The detachment mechanism of particles from the substrates is known to be belonged in four types; rebounding, sliding, rolling and lifting. In this study, a modeling effort is performed to explain the detachment mechanism of a contaminant particle due to the rebounding caused by the vertical collision of the $CO_2$ snow. The Hertz and Johnson-Kendall-Roberts(JKR) theories are employed to describe the contact, adhesion and deformation mechanisms of the particles on a substrate. Numerical simulations are followed for several representative cases, which provide the perspective views on the dynamic characteristics of the particles as functions of the material properties and the initial inter-particle collision velocity.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.649-665
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.691-707
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.

• 공업화학
• /
• 제22권3호
• /
• pp.308-311
• /
• 2011

하수슬러지 촤에 MnOx를 담지한 촉매를 사용하여 $NH_3$를 환원제로 하는 선택적 촉매 환원반응의 반응 메커니즘 분석을 수행하였다. XRD 분석 결과 활성 Mn phase는 $Mn_3O_4$인 것으로 여겨졌다. 또한 $150^{\circ}C$ 이하에서는 흡착반응이 주요한 질소산화물 저감 메커니즘으로 작동하였으나, $100{\sim}150^{\circ}C$에서는 환원반응도 질소산화물 저감에 관여하는 것으로 보여졌다. 실험결과에 기초하여 활성 촤와 여기에 MnOx를 담지한 촤에서의 반응속도상수를 비교하였다. MnOx 담지촤는 높은 충돌계수와 낮은 활성화 에너지에 기인하여 높은 반응속도 상수와 높은 NOx 제거 효율을 나타내었다. 두 가지 촤 모두 본 실험 조건하에서 활성화 에너지는 상대적으로 낮았다(10~12 kJ/mol).

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.361-366
• /
• 2002

Several effects on Pb$^{2+}$ removal by crab shell from aqueous solution were investigated. As the increase of initial Pb$^{2+}$ concentration and decrease of initial crab shell concentration, the time required to reach an equilibrium state and the residual Pb$^{2+}$ concentration increased. In our experimental ranges, the optimum initial Pb$^{2+}$ concentration and crab shell concentration were below 103 mg/$\ell$ and over 0.5 mg/$\ell$, respectively. Also, in order to investigate the mechanism of Pb$^{2+}$ removal by crab shell in aqueous solution, the crab shell was compared with chitosan and chitin on aspects of Pb$^{2+}$ removal capacity and Pb$^{2+}$ removal rate. The Pb$^{2+}$ removal by crab shell was greater than that by chitin and chitosan. The role of chitin was not so great in Pb$^{2+}$ removal by crab shell. The Pb$^{2+}$ removal by chitosan was not exactly correlated to the molecular weight of chitosan. weight of chitosan.

• Tribology and Lubricants
• /
• 제28권6호
• /
• pp.272-277
• /
• 2012

Finite element analysis was carried out using wafer-scale and particle-scale models to understand the mechanism of the fast removal rate(edge effect) at wafer edges in the chemical-mechanical polishing process. This is the first to report that a particle-scale model can explain the edge effect well in terms of stress distribution and magnitude. The results also revealed that the mechanism could not be fully understood by using the wafer-scale model, which has been used in many previous studies. The wafer-scale model neither gives the stress magnitude that is sufficient to remove material nor indicates the coincidence between the stress distribution and the removal rate along a wafer surface.