• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.19-24
• /
• 1998

This paper aims to clarify the effects of grinding conditions on the ground surface and bending strength in surface grinding of various ferrites with diamond wheel. The main conclusions obtained were as follows. The surface roughness becomes better at lower wheel speed in the case of v/V=1$\times$10-3, and the condition of v/V=1$\times$10-4shows the best performance for the finish grinding. When the relative contact temperature becomes lower at a constant value of v/V, the ground surface exhibits lower roughness. The ground surface shows that the fracture process during grinding becomes more brittle at the higher value of v/V. The damage depth which affect the bending strength is below 10$\mu$m in the grinding condition of S=10㎣/mm.s with the diamond tool after dressing & truing, however, the depth increases with increasing removal rate(S). When the strength degradation due to grinding is larger, the removal depth for the recovery of strength requires a larger size.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.679-690
• /
• 1997

Oil spill over the sea and the river become a serious problem in these days. Two different approaches are used to clean up the spilled oil by means of chemical dispersion and mechanical devices. If it is possible, removing spilled oil using mechanical devices are highly desirable in order not to worry about the secondary contamination from chemical treatment. One of the major unsolved problems using mechanical devices has been the recovery of highly viscous oil spill. So, the systematic experimental data for treating very viscous oil are still wanting. In the present study a series of experiments were carried out to study the effect of the rotational direction of the belt skimmer on the rate of oil recovery using Bunker C oil. Three different situations, namely, upward, downward and up-and-downward pickup rate have been investigated for variable belt speed. The results showed that the rate of oil recovery for downward pickup was much higher than that for upward pickup. The major mechanism to recover the oil using a belt skimmer has been confirmed that oil sticks to the belt surface while moving to the water rather than moving upward. For the removal of spilled oil the optimal belt speed under the present experimental conditions was found to be about 200 ~ 270 mm/s just before the starvation started. The present experimental results would provide the basis for understanding the performance characteristics and physics of various types of skimmers.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.991-995
• /
• 2006

The layered double hydroxide with the insertion of chloride ions (LDH-Cl), which was synthesized by the co-precipitation method, was applied to investigate the fundamental aspects of the absorptive agent for phosphate removal from wastewater. The adsorption capacity was best described by the Langmuir-FreundIich isotherm, and the estimated isotherm parameters indicate that the LDH-CI capacity for the phosphate removal is much higher than that observed using a natural adsorbent material such iron oxide tailing. The kinetic experiment also showed that the LDH-Cl adsorption reaction rapidly at the adsorptive rate of 0.55 mg-P/g-LDH/min, implying that this adsorbent can be of use in the full-scale applications. The pH had a minimal effect on the LDH adsorption capacity in the range of 5 to 11, although the capacity dropped at the low pHs because of the change in LDH surface properties. Furthermore, other anions such as $Cl^-$ and $NO_3{^-}$ commonly found in the wastewater streams insignificantly affected the phosphate removal efficiencies, while $HCO_3{^-}$ ions had a negative effect on the LDH adsorption capacity due to its high selectivity. The phosphate removal experiment using the actual secondary effluent from a wastewater treatment plant showed the similar decrease in adsorption capacity, indicating that the bicarbonate ions in the wastewater were competing with phosphate for the adsorptive site in the surface of the LDH-Cl. Overall, the synthetic adsorbent material, LDH-Cl, can be a feasible alternative over other conventional chemical agents, since the LDH-Cl exhibits the high phosphate removal capacity with the low sensitivity to other environmental conditions.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.147-152
• /
• 2004

Gas separation membrane technology is useful for a variety of applications [1, 2]. such as hydrogen recovery from reactor purge gas, nitrogen and oxygen enrichment, water vapor removal from air, stripping of carbon dioxide from natural gas. etc. Although membrane separations are attractive because of low energy costs and simple operation, low permeabilities and/or selectivity often limit membrane applications [3, 4].(omitted)

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.641-648
• /
• 2003

본 연구에서는 돈사 폐수내의 인과 질소를 함께 결정화하여 회수하고 그 상등액을 전기분해 시키는 회분식 돈사 폐수공정에서의 오염물질 부하량과 수처리시간 변화에 따른 처리효율의 변화 및 각 오염물질 제거특성을 파악하였다. Struvite 형성을 위한 Mg원으로는 $MgCl_2$를 사용하였고 주입량은 폐수내 인 기준 1.3 Mole이었다. 총 4개의 운전(Run I, II, III, IV)에서 얻어진 평균 제거효율과 그 제거특성을 분석한 결과 인의 경우 부하량 변화에 따른 처리효율의 변화는 관찰되지 않았으며 제거의 주요 역할을 하는 반응조는 Struvite 반응조로서 적정 Mg원만 제공된다면 pH 조절제 첨가 없이 폭기만으로도 부하량에 관계없이 88% 이상의 제거가 MAP 형성을 통해 얻어지는 것으로 나타났다. 높은 암모니아성 질소 제거효율을 유지하기 위한 적정 부하량은 약 100g/$m^3$.d로서 동 부하량 이하에서는 부하량이 증가함에 따라 제거량도 증가하면서 90% 이상의 높은 효율과 일정한 제거특성을 보인 반면 그 이상에서는 불안정한 제거특성을 나타내면서 제거효율이 감소하였다. TOCs의 경우에는 부하량 변화에 따른 처리효율 변화는 관찰되지 않았으며, 그 제거효율은 수처리 시간에 의존적인 것으로 나타났다 ($r^2$ = 0.97). 색도 제거 효율은 전기분해조 용적기준 수처리시간 2일 이상에서 94%의 매우 높고 일정한 효율을 얻을 수 있었다.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.317-327
• /
• 1996

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. Zinc-tolerant microorganism, such as Pseudomonas chlororaphis which possessed the ability to accumulate zinc, was isolated from industrial wastewaters polluted with various heavy metals. The characteristics of zinc accumulation in the cells, recovery of the zinc from the cells accumulating zinc, were investigated. Removal rate of zinc from the solution containing 100 mall of Zinc by zinc-tolerant microorganism was more than 90% at 48 hours after inoiulation of the microorganisms. A large number of the electron-dense granules were found mainly on thIn cell wall and membrane fractions, when determined by transmission electron microscope. Energy dispersive X- ray spectroscopy revealed that the electron-dense granules were zinc complex with the substances binding Heavy metals. The zinc accumulated into cells was not desorbed by distilled water, but more than 80% of the zinc accumulated was desorbed by 0.1M-EDTA. The residues of the cells after combustion at 55$0^{\circ}C$ amounted to about 21% of the dry weight of the cells. EDS analysis showed that the residues were comparatively pure zinc compounds containing more than 79% of zinc.

• 환경위생공학
• /
• 제12권3호
• /
• pp.81-86
• /
• 1997

In case of Industrial Wastewater, It was various pollutions, high concentration and different physical, chemical properties each other in accordance with classification of wastewater. Therefore, after inquiring into the influence on the membrane of the dissolved pollutants, we should select the membrane of best efficient quality. As results of experiments on pilot plant test, optimum operating pressure for fouling removal was 34BAR, when continues operating was 34 BAR, recovery rate was 75% and permeate water flux was $32.9{\;}{\ell}/hr{\cdot}m^{2}$.

• 기본간호학회지
• /
• 제1권1호
• /
• pp.37-49
• /
• 1994

The purpose of this study was to measure the oral temperature, skin temperature, and subjective discomfort according to the application time of ice bag on thigh, head, and abdomen. This study was also intended to suggest nursing principles about ice bag application by exploring the recovery time of skin temperature after the removal of ice bag. The design of this study was $8{\times}3$ factorial design with one sample repeated measure. Here, the application time of ice bag(criteria, 5min, 10min, 20min, 30min, 40min, 50min, 60min) and the application site of ice bag(thigh, head, abdomen) were independent variables. The subjects were 10 university woman students, and data collection was made from July, 1 to August 30, 1992. Rubber ice bag halfly filled with ice was covered with towel and applied on thigh, head and abdomen in other three days. Before applying the ice bag, oral temperature and skin temperature were checked for criteria. After ice bag was applied, skin temperature, oral temperature and VAS score were checked at first 5 minutes elapsed, and every 10 minutes until 60 minutes. After that, ice bag was removed, and oral temperature and skin temperature were also measured every ten minutes until 60 minutes. In this study, skin temperature and core temperature were measured by thermistor probe, and subjective discomfort was measured by 200mm VAS (Visual Analogue Scale). Some of the findings were as follows : 1. There were significant differences in skin temperature among the three application sites of ice bag as time go by. It was most decreased to $15.87^{\circ}C$ in thigh, and $19.47^{\circ}C$ in abdomen at 50 minutes after the application of ice bag, whereas $26.1^{\circ}C$ at 40 minutes in head. Before the application of ice bag, skin temperature showed significant differences in three sites, so that they were compared after the criteria was covariated. In other words, there was significantly more decrease of skin temperature in thigh and abdomen than head, after ice bag was applied for 20 minutes and more. 2. There was no significant difference in core temperature among the three application sites of ice bag during the time of application 3. There was no significant difference in subjective discomfort (VAS) among the three application sites of ice bag. 4. After the removal of ice bag, the recovery of skin temperature was significantly different in three sites during first 30 minutes. In head, skin temperature came up to criteria at 30 minutes after the removal of ice bag, but it was not recovered In thigh and abdomen even 60 minutes elapsed. 5. After the removal of ice bag, there was no significant difference in oral temperature among the three application sites of ice bag. 6. There was significant correlation between the skin temperature and VAS score only in thigh. In conclusion, it is suggested that head in more suitable site for the application of ice bag if it is used for the relief of fever or pain. When we apply ice bag on thigh or abdomen for the relief of pain, careful attention is required.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.207-222
• /
• 2014

폐-광석으로부터 금속구리분말을 회수하기 위하여 더미 미생물용출, Fe 제거와 전기분해실험을 수행하였다. Cu가 0.034% 함유된 폐-광석시료에 대하여 더미 용출실험을 수행한 결과, Cu 용출률은 박테리아 용출-용액에서 61%, 황산 용출-용액에서 62%로 나타났다. Fe를 효과적으로 제거하기 위하여 더미 용출-용액에 NaOH, $H_2O_2$ 및 $Ca(OH)_2$를 각각 적용한 결과 $H_2O_2$가 가장 효과적인 Fe 제거제로 선정되었다. 전해질 용액을 준비하기 위하여 $H_2O_2$를 더미 용출-용액에 처리한 결과 박테리아 용출-용액에서 Fe가 99%, 황산 용출-용액에서 60%로 제거된 반면에 Cu 제거율은 각각 5%와 7%로 나타났다. 이 용액에 대하여 전기분해 실험을 수행한 결과 Cu 회수율이 박테리아 용출-용액에서 98%, 황산 용출-용액에서 76%로 나타났다. 모수석 형태의 금속구리분말이 양쪽 용출-용액에서 회수되었다.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2205-2213
• /
• 2000

NF와 RO를 이용한 용존성 물질의 제거특성을 관찰하기 위해 UF로 전처리된 지하수가 파일럿플랜트에 6개월 동안 연속 공급되었다. 그리고 NF와 RO에서 발생한 막 오염의 특성을 파악하고 막 오염물질을 규명하기 위해서 파일럿플랜트에서 NF와 RO를 분리하여 autopsy test를 실시하였다. Autopsy test에서는 파일럿플랜트에서 사용된 막의 투과플럭스와 화학세정에 따른 플럭스의 회복율을 측정하였다. 아울러 여기서 발생한 폐세정액의 수질을 분석하여 막 오염물질의 구성성분을 알아보고자 하였다. NF와 RO1의 비플럭스는 운전시간 100일 이후에 급격히 감소하기 시작하였고 RO1에서의 감소율이 NF에서보다 컸다. 회수율이 낮온 RO2의 비플럭스는 점진적으로 감소하였다. 파일럿플랜트에서 용존성 무기물질의 제거율은 전기전도도로 NF, RO1, RO2 막에서 각각 76.3%, 88.2%, 95.3%로 RO2에서 가장 높았다. 용존성 유기물질의 제거율은 TOC로 80%정도였다. 와권형 NF와 RO의 막 오염은 원수 유입부보다는 농축수 유출부에서 많이 발생하였다. 이것은 유출부로 갈수록 막면선속도가 낮아지고 원수 중 오염물질의 농도가 높아졌기 때문이다. 막 오염물질의 주성분은 무기성 Ca염과 유기성 Si염인 것으로 생각되며 비가역적 막 오염에 기여도가 가장 큰 물질은 Fe인 것으로 생각된다. 막 오염물질의 형상을 SEM으로 관찰한 결과 최근접 표면에 유기물질이 부착되어 있고 그 위에 판상모양의 무기성분이 쌓여 있는 형태가 관찰되었다. 미생물 막 오염은 거의 관찰되지 않았는데 이것은 UF에서 1차로 대부분의 미생물이 제거되었기 때문이다.