• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.528-533
• /
• 2000

This paper is concerned to remote monitoring It management system on the bring up house of agricultural, lomestic animal, aquatic products. That is necessary for traffic network and monitoring unit for transmission the environment data of temperature, humidity and electric etc.. This study is executed the experimental research for structure of system. which are composed sensing interface, multi-processing, traffic network and algorithm. Result, that is respected the effective management, increase of produce and prevent of calamity on the bring up house by low cost of set & remain.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.188-191
• /
• 2007

The Han River is divided into North and South Korea by NLL(Northern Limit Line) and its area has been blocked by CCL(Civil Control Line) since the Korean War in 1950. Satellite remote sensing, therefore, is uniquely suited to monitoring bar transformation in the region. In river with bar, the characteristics of its physical conditions have a close relationship with bar morphology. In this paper, a monitoring approach of bar transformation in the Han River Estuary is presented using RADARSAT/SAR images from 2000 to 2005 and spatial patterns of bar morphology are presented. it could be said that in the estuary vegetated area and natural levees are developed well, but bars are shifted after an event like a flood. It is also showed that suspended solids such as silt transported through the estuary could contribute highly to a sedimentation environment around Incheon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.398-401
• /
• 2000

This paper describes the standardization of remote monitoring and controlling system for nursery electrical facilities. The proposed system have three operating modes of motoring, controlling, and fault-notifying. In fault-notifying mode, the local unit is designed to send messages on failure of the electrical facilities to the central computer, mobile phone, and pager. Also, the local unit is consisted of 24-input and 8-output port needed for monitoring and controlling the facilities. With the use of this standardized system, we could expect the effective management in every phase of nursery facilities.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.70-72
• /
• 2005

The present paper designed a weight measuring instrumentation system in which data conversion and a series of signal processing were totally equipped. 16 loadcell are incoming sensors and each output of the loadcell was amplified and filtered for proper analog signal processing. Several measuring instrumentation OP amps and general purposed OP amps were used. 12 bits AID converters converted analog signals to digital bits and a PIC microprocessor controlled the 16 channels of loadcell. RF RS232 modules were used for wireless communication between the PIC microprocessor and an ethernet host for a remote sensor monitoring system development.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.529-532
• /
• 2001

A Remote Monitoring Server(RMS) server which uses Internet and World Wide Web is constructed for SMD in-line system. Hardware base consists of server computer, virtual SMD in-line system and other computers. Software includes assignment of server, RDBMS and various modules in server home page. Web browser provide production quantity, bad PCB quantity, error number and error message in virtual SMD module, user information in setup module, detailed error information in fault diagnosis module, fault history in fault history module and customer information in customer service management module. These functions of the RMS helps a decrease of non-operation time and a service response as fast as possible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.121-124
• /
• 2003

The conventional CNC(Computerized Numerical Controller) of machine tool, which is dependent to CNC maker, was a closed architecture type. Therefore, it is impossible to implement a special user-define function to CNC. But recently, CNC is changed to OAC(Open Architecture Controller) type increasingly and the general function of CNC can be upgrade efficiently. This paper describes web service application for remote monitoring regarding the faults or machine tool with open architecture CNC. The major faults of CNC machine tool can be defined to the operational faults to be charged over 70%. Those faults are unpredictable because of being occurred without any warning. To generalize the fault diagnosis efficiently. two diagnosis models such as SF(Switching Function) and SSF(Step Switching Function) are proposed and the function of fault diagnosis is implemented to internal function of OAC. Also, to service remotely the faults of CNC machine tool. the suitable web environment is proposed and practical function is programmed to evaluate its operation on web.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.207-219
• /
• 2004

This paper presents the development of a knowledge-based control system operating via the Internet. With the synergy provided by the Internet, the central expert controller with its knowledge-base has the potential to serve a multitude of front-end clients located anywhere in the world provided they have Internet access. In this way, the operational span of the knowledge-based control system can be expanded to virtually anyplace within the reach of the Internet. This configuration has positive implications in improving the efficiency of distributed operations, thereby enabling plantwide optimization and costs savings. Datasocket technology is adopted to facilitate a more efficient data exchange between the knowledge-based central server and the front-end clients. A specific application in the remote monitoring and fault diagnosis of machines using the proposed control configuration is presented in the paper.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.197-200
• /
• 2002

This paper is about a system development which control and monitor a PLC of the remote-distance through the Internet using the web-browser. In general, the PLC uses its own communication protocol of PLC Manufacture. It is actually impossible to be used through the Internet, because the PLC communication protocol is basically developed to be suitable for short-distance. Therefore, what we need is a transformation system which can convert the PLC communication protocol into the form which can connect to the Internet. In that sense, this paper is that about remote-control method through the WWW ( World Wide Web ). This system have three characteristics. First, it is possible to connect the Internet directly irrespective of CPU, Operating system and browser. Second, it is easy for user to access and treat. Third, it needs only HTML to operate without java or plug-in expansion. In this paper, we will introduce the monitoring and control system of PLC on the Linux with the Apache web-server.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.173-176
• /
• 2002

DAS(Data Acquisition System) as a ground support equipment has played a critical role in proving the status of ready-to-fire of a rocket system before launch. But it is hard to implement and place a real-time measuring system in a control room at a long distance from the vehicle. In this paper DAS is introduced by being located at the LEC(Launch Equipment Container)[1], 50 meters away from the rocket and connected to remote monitoring system via fiber optics with TCP/IP protocol by means of client/server algorithm. Therefore real-time data acquisition and storage are guaranteed and a convenient and useful MMI (Man-Machine Interface) can be developed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.163-168
• /
• 2000

This paper proposes the new concept & design method and implementation of LonWorks network system for remote monitoring & lighting dimming control and telemetry using Web network. The Experimental LonWorks network system for telemetry & remote monitoring and control are designed and fabricated. As a result, it is verified that LonWorks is open, interoperable, reliable network system from the experimental results, especially, it seamlessly links the data and control networks, allowing the IP(internet) network to be treated as an extension of the LonWorks networks, and vice versa.