• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.535-542
• /
• 1994

Remote sensing technique is based on the estimation of land surface characteristics from the measurement of the emitted radiation from the earth. The hydrologically related parameters studied using this approach include surface temperature, evapotranspiration, soil moisture, precipitation and snow. This study introduces a method for estimating moisture content of a bare soil from the observed and simulated brightness temperature. In a bare soil, microwave emission depends on moisture content, soil temperature, and surface roughness. The method is based on a radiative transfer model with some modifications of Fresnel reflection coefficient to take into account the effect of surface roughness. One smooth bare field and two fields with different surface roughness are prepared for the study. The results indicate that the effect of surface roughness is to increase the soil's brightness temperature and to reduce the slope of regression between brightness temperature and moisture contents.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.94-97
• /
• 2006

Timber stand age information of timber in industrialized plantation forest is generally collected by field surveying which is labor-intensive, time-consuming, and very costly. It is also inconsistent in analyses perspective. As an alternative, The objective of this research is to present a practical solution for estimating timber age of loblolly pine plantation using Landsat thematic mapper (TM) images, shuttle radar topography mission (SRTM), and national elevation dataset (NED). A multivariate regression model was developed based upon satellite image-based information (i.e.normalized difference vegetation index (NDVI), tasseled cap (TC) transformation, and derived tree heights). A residual studentized technique was applied to remove potential outliers. After that, a refined age estimation model with a correlation coefficient R-square of 84.6% was obtained. Finally, the feasibility test of estimated model was performed by comparing estimated and measured stand ages of timber plantations using test datasets of plantation stands (2,032 stands). The result shows that the proposed method of this study can estimate loblolly pine stand age within an error of $2{\sim}3$ years in an effective and consistent way in terms of time and cost.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.565-572
• /
• 2011

A modified iterative N-FINDR algorithm is developed for fully automatic extraction of endmembers from hyperspectral image data. This algorithm exploits the advantages of iterative NFINDR technique and Iterative Error analysis technique. The experiments using a simulated hyperspectral image data shows that the optimum number of endmembers can be automatically decided. The extracted endmembers and finally generated abundance fraction maps show the potentialities of the proposed algorithm. More studies are needed for verification of the applicability of the algorithm to the real hyperspectral image data where the absence of pure pixels is common.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2013

The quality of satellite imagery should be improved and stabilized to satisfy numerous users. The radiometric characteristics of an optical sensor can be a measure of data quality. In this study, a band aggregation technique and spectral response function of hyperspectral images are used to simulate multispectral images. EO-1 Hyperion and Landsat-8 OLI images acquired with about 30 minutes difference in overpass time were exploited to evaluate radiometric coefficients of OLI. Radiance values of the OLI and the simulated OLI were compared over three subsets covered by different land types. As a result, the index of agreement shows over 0.99 for all VNIR bands although there are errors caused by space/time and sensors.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.442-444
• /
• 2007

How to observe the atmosphere is a subject of atmospheric research. The meteorological satellites and the ground states are used to do observation. However, both ways do not satisfy the requirement of scientists, especially the profiles of atmosphere on the ocean and the data for global atmosphere. Radio occultation (RO) technique, which has been used in planet science, is a method to solve the problem. In RO technique, the low Earth orbit (LEO) satellite receives the two frequency signal of Global Positioning System (GPS) satellite. The excess phase of the signal is calculated to retrieve the profiles of atmosphere parameters. In moist troposphere, the fluctuations appear in the phase of the signal and open loop (OL) is used to resolve it. The quality of the GPS signal generally deteriorates as the altitude decreases. In the procedure, the SNR of the GPS signal is used as the criterion. However, the SNR decreases with fluctuation which makes it difficult to locate the data of poor quality. In this paper, the phase of the signal will be used as part of the criterion.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.399-403
• /
• 1998

Absorption coefficient per mass unit of particles, specific absorption coefficient, is one of main parameters in developing algorithms for ocean color remote sensing. Specific absorption coefficient of chlorophyll (a$^*_{ph}$) and suspended sediment (SS) were analyzed by "wet filter technique" and "Kishino method" for data sets observed in the Yellow and Mediterranean Seas. A new data-recovering method for the filter technique was also developed using spectrum slopes. This method recovered the baseline of spectrum that was often missed in the Kishino method. High a$^*_{ph}$($\lambda$) values in the oligotrophic Mediterranean Sea and low values in the Yellow Sea were observed, spanning over the range of 0.02 to 0.12 $m^2$/mg, at the chlorophyll maximum absorption wavelength 440nm. The empirical relationship between a$^*_{ph}$ and chlorophyll concentration was found to fit a power function, which was slightly different from that proposed by Bricaud et ai. (1995). Absorption specific coefficients for suspended sediment (a$^*_{SS}$) didn't show any relationship with concentrations of suspended sediment. However, the average value of a$^*_{SS}$ at 440nm was close to the specific absorption coefficient of soil (loess) measured by Ahn (1990). The more-pronounced variability of a$^*_{SS}$ than a$^*_{ph}$ perhaps can explain more wide range of size-distribution for SS, which were determined by their specific gravity and agitation of water mass in the sea surface.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.125-135
• /
• 2001

The research on Harmful Algal Blooms is generally in progress through field work, such as the naked eye and sampling. It was difficult to forecast exactly the course, from appearance of red tide to disappearance, with the established ways of investigation and analysis. Accordingly it is need to analyze environmental factors in time and space, the appearance of red tide and the path of its migration by more objective and scientific methods. In this study the remote sensing was used to diminish damage from the occurrence of red tide. Such as a temperature change of sea water and a change of tidal currents, the major cause for red tide. The probed data were utilized. The technique for forecast of red tide phenomenon on the south coast was researched by analyzing the cause of red tide, pollutant flowed from landand the possibility of application of the technique was showed.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.121-132
• /
• 1994

A GIS based tactical terrain analysis system named ATTAS(Army Tactical Terrain Analysis Software) has been designed and implemented to support the field commanders for enhancing the capabiliy of their unit and efficiency of weapon system. This system is designed to provide computer graphics environment in which the analyst can interactively operate the entire analyzing process such as selecting the area of interest, performing analysis functions, simulating required battlefield operation and display the results. This system can be divided into three major sections; the terrain analysis modules, utilites, and graphic editor. The terrain analysis module inclused surface analysis, line of sight analysis, enemy disposition, 3D display, radar coverage, logistic route analysis, shortest path analysis, atmospheric phenomena prediction, automated IPB (Inteligence preparation of Battlefield), and other applied analysis. A combination of 2D and 3D computer graphics techniques using the X-window system with OSF/Motif in UNIX workstation was adopted as the user interface. The integration technique of remotely sensed images and GIS data such as precision registration, overlay, and on-line editing was developed and implemented. An efficient image and GIS data management technique was also developed and implemented using Oracle Database Management System.

• Korean Journal of Remote Sensing
• /
• v.9 no.1
• /
• pp.1-19
• /
• 1993

A simple bispectral threshold technique which reflects the temporal and spatial characteristics of the analysis area has been developed to classify the cloud type and estimate the cloud cover from GMS/S-VISSR(Stretched Visible and Infrared Spin Scan Radiometer) imagery. In this research, we divided the analysis area into land and sea to consider their different optical properties and used the same time observation data to exclude the solar zenith angle effects included in the raw data. Statistical clear sky radiance(CSRs) was constructed using maximum brightness temperature and minimum albedo from the S-VISSR imagery data during consecutive two weeks. The CSR used in the cloud anaysis was updated on the daily basis by using CSRs, the standard deviation of CSRs and present raw data to reflect the daily variation of temperature. Thresholds were applied to classify the cloud type and estimate the cloud cover from GMS/S-VISST imagery. We used a different thresholds according to the earth surface type and the thresholds were enough to resolve the spatial variation of brightness temperature and the noise in raw data. To classify the ambiguous pixels, we used the time series of 2-D histogram and local standard deviation, and the results showed a little improvements. Visual comparisons among the present research results, KMA's manual analysis and observed sea level charts showed a good agreement in quality.