• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.465-468
• /
• 2007

An intelligent home network system using low-power and low-cost sensor nodes was designed and implemented. In Intelligent Home Network System, active home appliances control is composed of RSSI (Received Signal Strength Indicator) based user indoor location tracking, dynamic multi-hop routing, and learning integration remote-control. Through the remote-control learning, home appliances can be controlled in wireless network environment. User location information for intelligent service is calculated using RSSI based Triangle measurement method, and then the received location information is passed to Smoothing Algorithm to reduce error rate. In order to service Intelligent Home Network, moreover, the sensor node is designed to be held by user. The gathered user data is transmitted through dynamic multi-hop routing to server, and real-time user location & environment information are displayed on monitoring program.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.357-360
• /
• 2007

An asset tracking using wireless sensor network is concerned with geographical locations of sensor nodes. The limited size of sensor nodes makes them attractable for tracking service, at the same time their size causes power restrictions, limited computation power, and storage restrictions. Due to such constrained capabilities, the wireless sensor network basically assumes the failure of sensor nodes. This causes a set of concerns in designing asset tracking system on wireless sensor network and one of the most critical factors is location uncertainty of sensor nodes. In this paper, we classify the location uncertainty problem in asset tracking system into following cases. First, sensor node isn't read at all because of sensor node failure, leading to misunderstanding that asset is not present. Second, incorrect location is read due to interference of RSSI, providing unreliable location of asset. We implemented and installed our asset tracking system in a real environment and continuously monitored the status of asset and measured error rate of location of sensor nodes. We present experimental results that demonstrate the location uncertainty problem in asset tracking system using wireless sensor network.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.49-51
• /
• 2000

This paper presents a fault location algorithm for single-phase-to-ground faults on the teed circuit of a parallel transmission line. This algorithm uses only local end voltage and current information. Remote end and fault currents are calculated by using distribution factors. To reduce load current effect, negative sequence current is used. EMTP simulation result have shown effectiveness of the algorithm under various conditions.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.597-599
• /
• 2003

Moving pattern is as a kind of sequential pattern, which can be extracted from the large volume of location history data. This sort of knowledge is very useful in supporting intelligence to the LBS or GIS. In this paper, we proposed the continuous moving pattern mining approach in LBS platform and LBS Miner. The location updates of moving objects affect the set of the rules maintained. In our approach, we use the validity thresholds that indicate the next time to invoke the incremental pattern mining. The mining system will play a major role in supporting the various LBS solutions.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.33-39
• /
• 2006

Home modification has come to be recognized as an important intervention strategy to manage health care conditions, maintain or improve functioning, ensure safety, and reduce the wheelchair user's dependency on others. However, the availability of skilled professionals with experience in home modifications for accessibility is limited. A system that enables accurate remote assessments would be an important tool to improve our ability to perform home assessments more easily and at decreased cost. A Remote Wheelchair Accessibility Assessment System (RWAAS) using Virtualized Reality(VR) technology was developed that enabled clinicians to assess the wheelchair accessibility of users' built environments from a remote location. Characteristics of the camera and 3D reconstruction program chosen for the system significantly affect its overall reliability. In this study, we performed two reliability analyses on the hardware and software components: 1) Verification that commercial software can construct sufficiently accurate 3D models by analyzing the accuracy of dimensional measurements in a virtualized environment; 2) comparison of dimensional measurements with four camera settings. Based on these two analyses, we were able to specify a consumer level digital camera and the Photomodeler Pro software for this system. And we then tested the feasibility of the selected software and hardware in an actual environment. Lastly, A field evaluation was performed to test whether this new system is comparable to the traditional method of accessibility assessment to evaluate its ability to assess the accessibility of a wheelchair user's typical built environment. The results of field trials showed high congruence between the assessments by two methods. Findings suggested that the RWAAS assessments have the potential to enable specialists to assess potential accessibility problems in built environments regardless of the location of the client, home, or specialist.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.141-150
• /
• 2005

Objectives : This study was accomplished in order to find out how Korean medical doctors take acupuncture prescription for knee osteoarthritis in clinical practice Methods : The survey questions were developed by the consensus from 4 professors and 10 residents who major in acupuncture & moxibustion for developing clinical trial protocol on individualized acupuncture treatment for knee osteoarthritis. 206 persons having more than 10 years experience were randomly selected from a list of Korean medical doctors. Telephone interviews with them were conducted by the well-trained interviewers between May 21 and May 27 in 2005. Results : 139 of 206 Korean medical doctors made an acupuncture prescription prior to treatment of knee osteoarthritis. 103 of 139 Korean medical doctors used both local and remote points, and 26 of them used remote points only, and 10 of them used local points only. In case of doctors who use remote points, the five element (45 of 129) or Saam (28 of 129) acupoints were used dominantly, and its was based on the pattern identification of the Jangbu organs related with the pain (56 of 129) or of the pain location (35 of 129). Conclusion : This study showed that Koran medical doctors prefer to use remote points such as five element or Saam acupoints based on the pattern identification of the Jangbu organs related with the pain or the pain location. These result may be useful for developing protocols for clinical trial on acupuncture on knee osteoarthritis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.207-214
• /
• 2011

In this paper, using Zigbee-based wireless sensor networks and Lego MindStorms NXT robot, a remote monitoring and navigation system for mobile robot has been developed. Mobile robot can estimate its position using encoder values of its motor, but due to the existing friction and shortage of motor power etc., error occurs. To fix this problem and obtain more accurate position of mobile robot, a ultrasound module on wireless sensor networks has been used in this paper. To overcome disadvantages of ultrasound which include straightforwardness and narrow detection coverage, we rotate moving node attached to mobile robot by $360^{\circ}$ to measure each distance from four fixed nodes. Then location of mobile robot is estimated by triangulation using measured distance values. In addition, images are sent via a network using a USB Web camera to smart phone. On smart phones we can see location of robot, and images around places where robot navigates. And remote monitoring and navigation is possible by just clicking points at the map on smart phones.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.526-531
• /
• 2001

The flow of remote field eddy current energy is studied at nonmagnetic coaxial tubes by using both experiments and finite element calculations based on commercial software package. The results showed that remote field eddy current energy at coaxial tubes flow along over the outer surface of external tube, not through the gap between internal and external tubes. This means that the through wall transmission characteristic of remote field eddy current testing (RFECT) is still valid at tube in tube configurations and the RFECT could be potential nondestructive technique for crack detection, spacer location and gap sizing at the coaxial CANDU fuel channel tubes.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.361-369
• /
• 1998

Recently, the improvement of on-board satellite sensors covering hyperspectral image sensors, high spatial resolution sensors provide data on earth in diverse aspect. The application field relating remotely sensed data also varies depending on what type of job one wants. The various resolution of sensors from low to extremely high is also available on the market with a user defined specific location. The expense to purchase remote sensed data is going down compare to the cost it need past few years ago in terms of research or private use. Now, the satellite remote sensed data is used on the field of forecasting, forestry, agriculture, urban reconstruction, geology, or other research field in order to extract meaningful information by applying special techniques of image processing. There are many image processing packages available worldwide and one common aspect is that they are expensive. There need to be a advanced satellite data processing package for people who can not afford commercial packages to apply special remote sensing techniques on their data and produce valued-added product. The study was carried out with the purpose of developing a special satellite data processing package which covers almost every satellite produced data with normal image processing functions and also special functions needed on specific research field with friendly graphical user interface (GUI). And for the people with any background of remote sensing with windows platform.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.676-678
• /
• 2003

Recently, in according as rapid improvement of telecommunication markets and wireless internet technology, Location- Based Services (LBS) have been discussed as new 'Killer' application. The purpose of LBS is to determine location of user through mobile handset and to offer location information service to end-user. This paper has suggested an efficient transmission scheme of maps data as one of the important content services relating to data transmission of LBS in mobile environment. The basic system consists of three parts : (1) GIS (Geographic Information System) Server for storing, processing and handling map data, (2) Middleware Server for transmitting of map data by request of client, and (3) Client for requesting map data to Server and displaying them on handset. Also, in order to transmit map data, we are to expand WKB (Well Known Binary) in conformance to Simple Feature Specification of OGC (Open GIS Consortium), and increase efficiency of data transmission by developing trans mission data format to be able to transmit lightweight data and considering data compression technology.