• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.339-347
• /
• 2007

A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.149-155
• /
• 2016

This paper presents a control method of a mecanum wheel-based omni-directional electric board using driver weight shift. Instead of a steering device such as a joystick or a remote controller, 3 degree-of-freedom driving command for translational and rotational motion of the omni-directional electric board is generated from position of center of gravity measured from weight distribution. The weight shifting motion is not only a driving command but also an intuitive motion to overcome inertial forces. The overall control structure is presented with experimental results to prove validity of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.5
• /
• pp.420-426
• /
• 2001

In this paper, we introduce a case study of developing a miniature humanoid robot that has 16 degrees of freedom and is able to perform statically stable walking. The developed humanoid robot is 37cm tall and weighs 1,200g. RC servo motors are used as actuators. The robot can walk forward and turn to any direction on an even surface. It equipped with a small digital camera, so it can transmit vision data to a remote host computer via wireless modem. The robot can be operated in two modes: One is a remote-controlled mode, in which the robot behaves according to the command given by a human operator through the user-interface program running on a remote host computer, the other is a stand-alone mode, in which the robot behaves autonomously according the pre-programmed strategy. The user-interface program also contains a robot graphic simulator that is used to produce and verify the robot\`s gait motion. In our walking algorithm, the ankle joint is mainly used for balancing the robot. The experimental results shows that the developed robot can perform statically stable walking on an even surface.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.33-40
• /
• 2015

This paper presents the design and implementation of the educational remote controlled robot system including remote sensing in the embedded environment. The design of sensing information processing, software design and template design mechanism for the programming practice are introduced. LPC1769 using Cortex-M3 core as CPU, LPCXPRESSO as debugging environment, C language as firmware development language and FreeRTOS as OS are used in development environment. The control command is received via RF communication by the server and the robot system which is operated by driving the various sensors. The educational procedure is from robot demo operation program as hands-on practice and then compiling, loading of the basic robot operation program, already supplied. Thereafter the verification is checked by using the basic robot operation to allow demo operation such as hands-on-training procedure. The original protocol is designed via RF communication between server and robot system, and the satisfied performance result is presented by analyzing the robot sensing data processing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.725-726
• /
• 2017

Recently, IoT (Internet of Things) has been applied to various fields, not limited to places, through continuous research. However, the existing IoT system is based on the surrounding environment rather than the user-oriented operation of the device. therefore, there is a problem in that the efficiency and accuracy of the work are low. In this paper, we propose a user remote control analysis algorithm to solve these problems. When the user performs the remote control, the command is collected and the data is sorted according to the device and time. Analyze time-dependent behavior of devices based on sorted data. based on the results of the analysis, the environment is controlled by operating the device inside the home. Therefore, it is expected that the accuracy and convenience of device operation will be increased by providing customized service to users.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2577-2580
• /
• 2003

In this paper we present a teleoperation system of an internet-based mobile robot based on H.263 image compression algorithm. We control remotely the networked mobile robot with vision over the internet under unknown environments in the real time. The main feature of this system is that local operators need to download and install a client program and so they can command the robot in a remote location. Image information of remote location is compressed by H.263 video codec algorithm and then transmitted to a local operator. We constructed and tested a networked autonomous mobile robot in the real field. The experimental results show the usefulness of the robot under test.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.225-228
• /
• 2001

We describe the implementation of MPEG-4 Systems for Video on Demand services. We discuss the issues in implementint MPEG-4 Systems, specially Object Description and Elementary stream management(Buffer control, Synchronization). The file-server pump the multiplexed streams to the client through the DMIF. Interaction between server and client is done with User Command(play, pause, stop, fast foward, ...). Stream data are multiplexed off-line. In advance, the file-server read multiplexed streams and pumps it to MPEG-4 terminal(client). Our system can be used in various application not only Video on Demand services, but also Internet broadcasting, remote surveillance, mobile communication, remote education, etc.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.369-374
• /
• 2012

This paper handles the UX implementation for system control using the visual input information of hand motion. Kinect sensor from Microsoft is used to acquire the user's skeleton image from the 3-D depth map at a rate of 30 frames per sec. and eventually knows the x-y coordinates of hand joints. The x-y coordinate value changes of hands between the present frame and next frame shows the direction of changes and rotation of changes and the various hand motion is used as a UX input command for remote image control on smart TV, etc. Through the experiments, we showed the implementation of the proposed idea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.478-478
• /
• 2000

In this paper, presents the design of mobile field robot controlled by microcomputer. The computer works as the supervisory system for decision making and sending command to control the field robot. An information from encoder, infrared sensors using for control task of the robot that can be interconnected with the computer through the serial communication RS422 standard. In this case, the user can design the program algorithm base on microcomputer in order to control and define the routing of the mobile robot. Moreover, the robot can be installed other equipment fer collect data such as picture, sound, temperature etc., in order to working in the dangerous area.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.292-301
• /
• 2014

This paper describes development of distributed type independent electro-hydraulic ballast valve remote control system with diagnostic function based on fuzzy inference using redundant Modbus communication and ethernet Modbus TCP/IP. Diagnostic function estimate degradation of system components and diagnose system faults, which results in shortage of fault maintenance time and improvement of system safety. Slave devices which control each valve and master device which command, monitor and diagnose slave system are developed. Slave devices are connected to master device with redundant Modbus networks and master device is connected to ship's integrated control system with Modbus TCP/IP. Also this paper describes development of simulator to test and confirm whether developed system can be integrated with ship's integrated control and monitoring system.