• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.257-260
• /
• 1997

Bluetooth is the most promising network paradigm which ca open the new area in the information technology. Especially, bluetooth can link all the electrical products and PCs(Personal Computer) to cellular phone or PDA. In this paper, the data from ECU which are gathered by scanner are communicated between tow PCs using the bluethooth modules. The acquired data are ECU's self diagnosis signal and sensor output signal. Self diagnosis signals are very important to check the ECU's state and sensor output signals. Using these data, the possibility of wireless communication with ECU is developed and verified. Protocol stack of bluetooth is L2CAP through HCI and wireless communication software of ECU's signal is developed using VC++ in Windows 98 environment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1239-1242
• /
• 2003

The target of this paper is the manufacturing system of mould plant and the object of system development is the reduction of lead times and the improvement of product quality. From the existing MES framework. we found the module to apply in the mould plant, designed and developed the function of the module. Also. as the environment of development is based on internet, we can check and analysis correctly the status of mould plant from remote site.

• 대한임베디드공학회논문지
• /
• 제3권3호
• /
• pp.136-142
• /
• 2008

Mobile robots can offer services like intelligent monitoring in an indoor environment using network connection with remote users. In this paper, we designed and developed a networked security robot system with various sensors, such as flame detector, gas detector, sound monitoring module, and temperature sensor, etc. The robot can be accessed through a web service and the user can check the status of the environment. Using ADAMS software, we defined the motor specification for a worst-case condition of climbing over a obstacle. We applied the robot system in monitoring office condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.380-382
• /
• 2007

As the society changes more to the aging society in future, many healthcare product are developed and distributed more on the market. The digital wrist band tye blood pressure device for home use are popular already in the market. It is useful for checking blood pressure level at home and control of hypertension. Especially. It is very essential home device to check the health condition of blood circulation disease. Nowadays many product types are available. But the measurement accuracy of blood pressure is not enough compared to the mechanical type. It needs to be upgraded to assure the precise health data enough to use in the hospital. The structure, feature and output signal of capacitor type pressure sensors are analyzed. An improved design fa capacitor sensor is suggested. It shows more precise health data after use on a wrist band type health unit. They can be applied for remote u-health medical service.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1011-1014
• /
• 1999

An on-board monitoring system for an automobile emission gas has a test chamber remote from the automobile's engine exhaust gas stream: apparatus for supplying the chamber with sampled exhaust gases. A single hydrocarbon sensor exposed to the exhaust gas in the chamber to render a signal responsive to the hydrocarbon. The conductive ions in emission gas was checked by the HC sensor in test chamber. A preferred application includes hydrocarbons in an automotive exhaust gas stream by exposing a transition porous alumina($Al_{2}O_{3}$) ceramic based sensor to the same exhaust gas stream. By combining the electrical signal, a measure of hydrocarbons can be provided.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권2호
• /
• pp.251-257
• /
• 2003

In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic Intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not consider emergency vehicles for safety escort.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.512-514
• /
• 2007

Even though official G/T for KOMPSAT-2 X-Band downlink acquisition was 32dB/K, KARI performed the data acquisition experiment using 2Am X-Band antenna to check if popular 2Am MODIS receiving antenna can receive KOMPSAT-2 MSC data within acceptable quality level. Through several acquisition tests, it was shown that G/T value of 24dB/K can provide the reliable data BER quality, 10-6 for the above the elevation angle of 10 degree. Some plots for Eb/No versus elevation angle are provided.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.175-178
• /
• 2007

COMS (Communication Ocean Meteorological Satellite) is the geostationary satellite being developed by Korea Aerospace Research Institute for multi-mission: experimental communication, ocean monitoring and meteorological observations. The COMS operation is controlled by the on-board software running on the spacecraft central computer. The software is written in ADA language and developed under the software life cycle: Requirement analysis, Design, Implementation, Component test and Integration test. Most functional requirements are tested at component level on a software component testing tool, ATTOL. ATTOL provides a simple way to define the test cases and automates the test program generation, test execution and test analysis. When two or more verified components are put together, the integration test starts to check the non-functional requirements: real-time aspect, performance, the HW/SW compatibility and etc. This paper introduces the COMS on-board software and explains what to test and how to test the on-board software at component level using ATTOL.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.460-463
• /
• 2007

COMS (Communication Ocean Meteorological Satellite) is the geostationary satellite being developed by Korea Aerospace Research Institute for multi-mission: experimental communication, ocean monitoring and meteorological observations. The COMS operation is controlled by the on-board software running on the spacecraft central computer. The software is written in ADA language and developed under the software life cycle: Requirement analysis, Design, Implementation, Component test and Integration test. Most functional requirements are tested at component level on a software component testing tool, ATTOL. ATTOL provides a simple way to define the test cases and automates the test program generation, test execution and test analysis. When two or more verified components are put together, the integration test starts to check the non-functional requirements: real-time aspect, performance, the HW/SW compatibility and etc. This paper introduces the COMS on-board software and explains what to test and how to test the on-board software at component level using ATTOL.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.161-167
• /
• 2007

It is dangerous that an inspector overhauls defects and condition of the inner parts of an oil tanker because of many harmful gases, complex structures, and etc. However, these inspections are necessary to many oil tankers over old years. In this study, we proposed the design of mobile robot for inspection of CAS in oil tanker. The developed CAS inspection mobile robot has four modules, a measurement module of oil tanker's thickness, a corrosion inspection module, a climbing module of the surface on a wall, and a monitoring module. In order to get over at a check position, the driving control algorithm was developed. Magnetic wheels are used to move on the surface of a wall. This study constructed a communication network and the monitoring program to operate the developed mobile robot from remote sites. In order to evaluate the inspection ability, the experiments about performance of CAS inspection using the developed mobile robot have been carried out.