• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.408-413
• /
• 2008

In this work, the use of LPRTO (low pressure rapid thermal oxidation) and remote plasma oxidation was evaluated for the preparation of ultra thin silicon oxide layer with less than 5 nm. The silicon oxide thickness grown by LPRTO was rapidly increased and saturated. The maximum thickness could be controlled at about 5 nm. As RF power and oxygen flow rate at a remote plasma oxidation increased, the behavior of oxide growth was almost the same as that of LPRTO. The oxide thickness of 4 nm was the maximum obtained by a remote plasma oxidation in this work. The quality of silicon oxide grown by LPRTO was comparable to the thermally grown conventional oxide.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.137-145
• /
• 2022

The usability evaluation of the remote fluid monitoring device, which was introduced to reduce the work of nurses and increase the efficiency, was performed due to the expansion of the non-face-to-face medical system. Remote fluid monitoring is a fusion of various technologies such as fluid measurement and analysis, error correction technology, and transmission technology. The range of use by users, the information they want to obtain, and the control device, etc. are wide, and the factors that evaluate the product are also diverse. Therefore, it is difficult to improve the product through evaluation. In this study, a quantitative index was developed to help improve the product for commercialization by conducting 20 usability evaluations in three areas of product stability, operability, and satisfaction with the remote sap monitoring system device. It was performed through infrared and load cell-type sap monitoring devices. In terms of stability, there was a difference in installation work such as fixing the pole of the device, and high satisfaction was shown for operability and accuracy. In terms of product satisfaction, the satisfaction of load cell devices was generally high.

• Research in Community and Public Health Nursing
• /
• v.33 no.3
• /
• pp.269-278
• /
• 2022

Purpose: This study analyzed the retention factors of Korean community health practitioners who sustained over 20 years based on a multi-dimensional framework. This study suggests global implications for nurses working in rural or remote areas, even during a worldwide pandemic. Methods: The participants were 16 Korean community health practitioners who worked in rural or remote locations for over 20 years. This study identified nurses' key retention factors contributing to long service in rural and remote areas. This is a qualitative study based on the narrative method and analysis was conducted using grounded theory. A semi-structured questionnaire was conducted based on the following: the life flow of the participants' first experience, episodes during the work experience, and reflections on the past 20 years. Results: First, personal 'financial needs' and 'callings' were motivation-related causal conditions. The adaptation of environment-work-community was the contextual condition leading to intervening conditions, building coping strategies by encountering a lifetime crisis. The consequences of 'transition' and 'maturation' naturally occurred with chronological changes. The unique factors were related to the 'external changes' in the Korean primary health system, which improved the participants' social status and welfare. Conclusion: Considering multi-dimensional retention factors was critical, including chronological (i.e., historical changes) and external factors (i.e., healthcare systems), to be supportive synchronously for rural nurses. Without this, the individuals working in the rural areas could be victimized by insecurity and self-commitment. Furthermore, considering the global pandemic, the retention of nurses is crucial to prevent the severity of isolation in rural and remote areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.87-95
• /
• 2020

South korea has been developing and managing the complete dimensions, around the rivers to rapid economic growth. In Korea, where water resources are scarce, administration and work are complicated and diversified in the computerization of related facilities and hydrologic data due to the indiscriminate development of river facilities. In general, dividing the water system based on object in remote sensing is relatively accurate in the image with the same spectral characteristics. However, the distinction between the reservoir and the river must be made manually due to the characteristics of remote sensing. Therefore, this study performed three classifications using GIS (Geographic Information System) to classify reservoirs and rivers. For the purpose of accuracy analysis, the land cover map provided by EGIS (Environmental Geographic Information Service) was used to evaluate the accuracy, and the average of 85.63% was found to be 75.40% of rivers, 89.50% of reservoirs, and 92.00% of others.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.915-919
• /
• 2005

It is materialized an unmanned vehicle system as a part of Intelligent Transportation System (ITS) which is a fundamental constituent for unmanned vehicle. Remote control system, monitoring system and remote operating system which are consisted of unmanned vehicle system. Network program by TCP/IP socket, and real-time control & operating controlled by servo-motors from a remote place, those are used to verify safety and stability of the unmanned vehicle system in this research. This unmanned vehicle is divided into two major sections which are an unmanned vehicle part and control station part. The server PC is installed on the unmanned vehicle and a client PC is installed at a remote place, which can control the u manned vehicle. In this research work, main theme is that we experimented and tested to check the speed and utilization of the wireless LAN communication.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• Nuclear Engineering and Technology
• /
• v.35 no.3
• /
• pp.243-250
• /
• 2003

Nuclear power plants (NPPs) will be highly connected network enabled systems in the future. Using the network and web enabled tools, NPPs will be remotely monitored by operators at any time from any place connected to the network via a general web browser. However, there will be two major issues associated with this implementation. The first is the security issue. Only the authorized persons need to be allowed to access the plant since NPP is a safety-critical system. However, the web technology is open to the public. The second is the network disturbance issue. If operators can not access the plant due to network disturbances, the plant will come into the out-of-control situation. Therefore, in this work, we performed a conceptual design of a web-based remote monitoring and control system (RMCS) considering these issues.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.62-65
• /
• 2010

Field robot represented by excavator can be applied for various working in manufacturing, construction, agriculture etc. Because of the flexibility of its multi-joint mechanism and the high power of hydraulic actuators. Since the excavator operates in the hazardous working circumstance, operators exposed in harmful environment. Therefore, automation system has been investigated to protect from the harmful environment. In this paper, the method to construct the remote control system is proposed. The remote control system is consisted of a manual and auto mode. Manual mode controls a hydraulic cylinder as open loop control. and auto mode controls the end effecter of excavator using tracking control system. The efficiency of remote control system was evaluated through the field test.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1268-1271
• /
• 2003

In the edge detection of RS image, the useful detail losing and the spurious edge often appear. To solve the problem, we use the dyadic wavelet to detect the edge of surface features by combining the edge detecting with the multi-resolution analyzing of the wavelet transform. Via the dyadic wavelet decomposing, we obtain the RS image of a certain appropriate scale, and figure out the edge data of the plane and the upright directions respectively, then work out the grads vector module of the surface features, at last by tracing them we get the edge data of the object therefore build the RS image which obtains the checked edge. This method can depress the effect of noise and examine exactly the edge data of the object by rule and line. With an experiment of a RS image which obtains an airport, we certificate the feasibility of the application of dyadic wavelet in the object edge detection.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.22-29
• /
• 1993

A remote control system was developed in order to operate by push-buttons the conventional drum and chute components, which have been operated manually, in a concrete mixer-truck. As actuators, a hydraulic power unit was used for chute operations: two DC motors for drum operations. The devised drum controller consisted of three electric circuits : an analog proportional-integral control circuit, a drum acceleration circuit, and an emergency stop circuit. The remote control system was installed to be tested experimentally and then was evaluated to work successfully with a desirable accuracy.