• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.109-121
• /
• 2020

As a decrease in labor became a serious issue in the manufacturing industry, smart factory technology, which combines IT and the manufacturing business, began to attract attention as a solution. In this study, we have designed and implemented a real-time remote management system for smart factories, which is connected to an IoT sensor and gateway, for plastic manufacturing plants. By implementing the REST API in which an IoT sensor and smart gateway can communicate, the system enabled the data measured from the IoT sensor and equipment status data to the real-time monitoring system through the gateway. Also, a web-based management dashboard enabled remote monitoring and control of the equipment and raw material processing status. A comparative analysis experiment was conducted on the suggested system for the difference in processing speed based on equipment and measurement data number change. The experiment confirmed that saving equipment measurement data using cache mechanisim offered faster processing speed. Through the result our works can provide the basic framework to factory which need implement remote management system.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.57-65
• /
• 2012

PURPOSES : Efficiency Improvement of a public road construction project management work using the development of a real-time remote site monitoring system METHODS : In this study, we developed the remote site monitoring system using a web camera for road construction projects in the RCMA(Regional Construction Management Administration). We can be monitored a construction progress and a weak point of the situation in real time using this. To achieve this, we tested about 10 road construction projects ordered by RCMA. Then, we verified a applicability for the site monitoring system in future. RESULTS : Take advantage of the remote site monitoring system consists of the Construction CALS System, one of the business systems used in the part of the MLTM(Ministry of Land, Transport and Maritime Affairs) institution-agencies. Was configured to be served through the "Construction CALS System" of "Construction Management System(Contractors)" and the "Construction CALS Portal System". Through this, Benefit analysis through a pilot application of the 10 road construction sites and developing considerations and "Guide for visual information processing equipment installation-operating in construction sites"are presented. CONCLUSIONS : Through the establishment of remote site monitoring system can improve the efficiency of construction management services. In addition, Various disasters and calamities, accidents and illegal construction will be prevented in advance is expected. This is expected to further improve the quality of the facilities.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1589-1592
• /
• 2003

Existing system management software solutions show limitations in time and space, as well as problems such as uncertain error messages, and also difficulty providing swift assistance or real time emergency support. Therefore, a wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone, Webpad) for instantaneous control. The implemented real time wireless remote control system provides remote server management functions, error or event message (unctions, log record functions, authentication function via mobile devices.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1315-1317
• /
• 2000

In this paper, a solution of remote manager system for power plant was introduced. In conventional remote control system computer or adapter are need to communicate with manager computer. As the number of managed power installations increases, the remote management system is going to be complicated and expensive. To solve the problem, a Multi-functional Board for power plant is developed. The Multi-functional Board has a both function of remote management and communication in LAN. This system will be hope to decrease the cost of remote management.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.4
• /
• pp.185-192
• /
• 2005

This paper proposes a DRMS(Distribution Remote Management System) which can enhance highly the economics of automatic metering system and the power quality supplied to the electric customer improving the efficiency of the meter reading, voltage management and load management work by realizing the remote meter reading, the remote voltage management and the remote load management based on the ADWHM(Advanced Digital Watt Hour Meter). The DRMS is designed so that the voltage management and load management work in remote site can be processed by collecting the voltage pattern and current pattern as well as watt hour data from all ADWHMs one time every month regularly or from special ADWHMS several time irregularly, A new on-line voltage and load management strategy based on the ADWHM is designed by analyzing the existing voltage management and load management process. Also, DRMS is designed so that watt-hour data, voltage pattern data, load pattern data and power factor data can be collected selectively according to the selection of user to assist effectively the methodology. Remote management program and database of the DRMS are implemented based on Visual C++, MFC and database library of MS. Also, DRMS is designed so as to communicate with the ADWHM using RS232C-TCP/IP converter and ADSL. The effectiveness of the remote metering function is proven by collecting and analyzing the data after ADWHMs installed in any site. The developed strategy and program also is verified through the simulation of voltage management and load management.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.746-753
• /
• 2004

In this paper, the Power Management System(PMS) which based on a decision making system according to power strategy is proposed and implemented. PMS is designed to have functions of power monitoring. controlling, synchronizing load sharing and monitoring of driving engine, etc. PMS consists of the internet communication system(ICS). Remote Management System(RMS) and Sensor Driver System (SDS) ICS transmits the monitoring and supervisory data via Internet to Remote Management System(RMS) in real-time SDS detects various power system data on local generator and utility via I/O interface system. I/O interface system receives various status data and outputs control signals. Implemented PMS is tested with dummy signal to verify proposed functions and shows good results. For future study implemented PMS will be tested under real load condition to merchandize.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.750-753
• /
• 2003

In this paper, we have developed the web-based management system for greenhouse teleoperation. The remote control system consists of database, web-server, controller in greenhouse, and clients. The database in the server stores user informations and greenhouse conditions, and is used to manage user login and conditioning data. The management system developed by using Java applet, which is a client program for effective and easy management of greenhouse, monitors the greenhouse in real time. Master and driver boards installed in greenhouse control unit. Database on flowering to collect and analyze data exchanges data with the server. The greenhouse can be managed effectively by timer routine, repeat control within setting time, and algorithm of setting points. Also, the greenhouse conditions can be controlled by manual or remote controller (PC) through web browser in internet. Furthermore, all of the control devices of the greenhouse are managed by remote control using PC and checked via camera installed in greenhouse.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.1-9
• /
• 1993

In this paper, to realize the network management function in automated manufacturing network Mini-MAP, the network management requirements are analyzed and the network management system is implemented on the basis of this analysis. The implemented management system which has both local management and remote management mechanism is considered as a single domain on the Mini-MAP network. Here, the remote management functions consist of network status, monitoring and remote operations and the local management functions have parameter display and network self testing. The MAP network controller is designed according to the MAP version 3.0 specifications and IEEE 802 standards. the operations of network management system are certified througth the test environments which consists of the implemented network adaptor and softwares for Mini-MAP.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.567-569
• /
• 2003

Because of the limited land resources, an efficient land use management to reach the sustainable development policy has become an urgent call in Taiwan. A long-term project entitled 'National land use monitoring program-the establishment of a land use change detection system' has been jointly conducted by both National Central University and Ministry of Interior since year of 2001. The main aim of the project is to use the remote sensing images to detect the land use changes on a national scale. This plan has been put into practice and indeed provides an effective assistance for land management.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.570-573
• /
• 2006

College GIS and remote sensing education usually consists of commercial software packages implementations in the classroom. Computer programming is quite important when college graduates work in private or public sectors relevant with GIS and remote sensing implementations. The objective of this paper was to develop a valley management system which implements GIS and remote sensing as the key components for education. The Valley Authority is entitled with water resource protection for sustainable drinking water supply of the second largest city in Taiwan. The test area consists of three different government agencies, Forest Service, EPA, and Water Resource Agency. Materials were provided by the Valley Authority in ArcGIS file format. MapObjects have made the GIS development process much easier. Remote sensing with image manipulation functions were provided by computer programming with Visual Baisc.NET and Visual C#.NET. Attributes inquiry are performed by these two computer languages as well. ArcGIS and ArcPad are also used for simple GIS manipulations of the test area. Comparison between DIY and commercial GIS can be made by college students. Functions provided by the developed valley management system depending on how many map layers have been used and what types of MapObjects components have been used. Computer programming experience is not essential but can be helpful for a college student. The whole process is a step-by-step sequence which college students can modify to depict their capability in GIS and remote sensing. The development process has gone through one semester, three hours every week in 18 weeks. College students enrolled in this class entitled with GIS showed remarkable progresses both in GIS and remote sensing.