• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2005

Since vegetations are near the wavelength range in 700nm and have absorbent as well as reflective wavelength ranges, there is a much difference in terms of its reflection rate. There are currently many researches on vegetation index being conducted in order to apply the remote-sensing technology to vegetations rising their characteristics of absorbent and reflective wavelength ranges. Normalized Difference Vegetation Index (NDVI) and Perpendicular Vegetation Index (PVI) have been most commonly used. It is usually the evaporation, carbon-dioxide consumption, and chlorophyll density that represent the activity of vegetation, but chlorophyll density is the most commonly used among them. Since the red wavelength range used to obtain the NDVI and PVI has a strong extinction of chlorophyll, it is also useful to test chlorophyll density. The NDVI, in particular, is used to identify the vegetation conditions summarily, and thus, is suitable for initiative researches. Nevertheless, since these vegetation index produce mixed information of the Vegetation vigor and vegetation cover, it is essential to monitor a wavelength range that is independent from redundancy of the Vegetation vigor and vegetation cover. Although many vegetation indices have evaluated both the vegetation vigor and Vegetation cover simultaneously, this research intends to emphasize the utility of separable evaluations of the Vegetation vigor and Vegetation Cover rate through an experiment with grasses. As a result of evaluating vegetation index using spectral reflectance, a separable evaluation of the vegetation vigor and cover has been found more useful.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.21-30
• /
• 2012

When two bands have different look angle in a space-borne camera system, the registration between two bands is required. The registration cannot be modeled with constant parameters because of dynamic of platform and parallax effect. The parallax effect is caused by terrain relief, hence it causes local distortion between two bands. Therefore, the terrain relief correction in order to reduce the parallax effect is required for better registration result, especially for high resolution image data. Such terrain relief correction also can be applied to image data acquired from multiple detectors with different look angle within a band, which is a one of commonly used configuration for a wider swath in space-borne camera system, in order to reduce the distortion between detectors. The RFM is a popular abstract model in remote sensing field, which gives us the relationship between the image plane and geodetic coordinate system. Therefore, we propose a terrain relief correction method based on the RFM. The experiment showed very promising result.

• Korean journal of applied entomology
• /
• v.50 no.2
• /
• pp.97-105
• /
• 2011

Understanding the metapopulation structure and movement of a species are required for conserving the species. In this paper, migration patterns and connectivity of patches of a threatened butterfly, Parnassius bremeri Bremer, were postulated using the mark-release-recapture (MRR) technique in a habitat located in the mid-southern region of the Korean peninsula. A total of 194 individuals were captured (137 males and 57 females) and, of them, 93 individuals (73 males and 20 females) were recaptured during the MRR experiment. The migration analysis showed 23-150% immigration and 28-53% emigration. There were high correlations between the migrating individuals and the distance between patches, but there was no correlation between migrating individuals and patch size or between migrating individuals and the number of host plants. Consequently, the migration of butterflies occurred frequently between closer patches, while patch size and quantity of the food plant had minor effects on migration behavior. Additionally, males migrated more frequently than females. Analysis of the migration patterns of P. bremeri showed that the central patch played an important role on linking patch groups and more frequent migrations were monitored between nearby patches than between the remote patches. This study suggested that active migrations take place between the neighboring multiple patches and these are accelerated if there is a stepping-stone patch between them.

• Archives of design research
• /
• v.16 no.2
• /
• pp.161-170
• /
• 2003

This study aims to understanding the effects of culture on websites with emphasis on the website structure and navigation. The website is inherently‘cultural’because anyone around the world can access to website if he or she is equipped with appropriate equipment. For the importance of cultural role in website, various researches have been conducted to understand the relationship between culture and website. However they tended to focus mainly on phenomenal matters such as color, layout, icon etc. There have been not so many thorough attempts to causal relationships between website and‘thick culture’in depth. The study conducted cross-cultural usability testing of websites between Korea and America. At first, representative I-commerce websites of Korea and America were selected and they were analyzed by the selected frameworks such as layout, display type, element type, and the relationship with homepage and sub-page navigation. The results were used to construct typical prototypes of website for Korea and America for experiment. Two websites were used for cross-cultural usability testing though specially-developed remote testing. 20 users from each country participated in the usability testing. The result shows that Korean users peformed better usability testing for Korean style structure of website while American counterparts showed better performances in American style of websites. Other various significant findings were revealed.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.21-29
• /
• 2004

The growth of water resources engineering associated with stable supply, management, development is essential to overcome the coming water deficit of our country. Large scale remote sensing and the analysis of sub-pixel variability of soil moisture fields are necessary in order to understand water cycle and to develop appropriate hydrologic model. The target resolution of coming Global monitoring of soil moisture field is about 10km which is not appropriate for the regional scale hydrologic model. Therefore, we need a downscaling scheme to generate hydrologic variables which are suitable for the regional hydrologic model. The results of the analysis of sub-pixel soil moisture variability show that the relationship between ancillary data and soil moisture fields shows there is very weak linear relationship. A downscaling scheme was developed using physically-based classification scheme and Neural Networks which are able to link the nonlinear relationship between ancillary data and soil moisture fields. The model is demonstrated by downscaling soil moisture fields from 4km to 0.2km resolution using remotely-sensed data from the Washita'92 experiment.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.39-47
• /
• 2008

With dramatic development of IT technology and start of DMB service, installing the DMB equipment in a vehicle for watching TV programs and literal or pictorial traffic information are increasing. Watching the DMB during driving the vehicle could cause visual and cognitive distraction to drivers as much as eating food, operating radio and using mobile phone. However, there is not much empirical research for this topic and no research examined the effect of watching the DMB on driving behaviors in Korea. So, the present study examined the effect of watching the DMB on the driving behaviors with car simulator experiment. Within subject design was used in the study. That is, all subjects drove the vehicle both in the watching DMB condition and the non-watching DMB condition. The results indicated that subjects in the watching DMB condition took longer time to arrive at the destination and operated accelerator and brake pedal rapidly than subjects in the non-watching DMB condition. That is, their overall driving stability was lower than non-watching subjects'. Additionally, we examined the difference among the DMB control conditions (i.e., keypad condition, touch-pad condition and remote controller condition) in the driving behaviors. Finally, we discussed the limitations and the implications of the present study.

• Science of Emotion and Sensibility
• /
• v.11 no.1
• /
• pp.39-56
• /
• 2008

Previous studies of music, user interface, and human-computer interaction have used sounds which include musical structure rather than real music. This study investigated whether real music affects objective and perceived usability. Silence, sound, and music conditions were compared in experiment 1 (kimchi refrigerator) and 2 (remote controller for air conditioner). Participants' performances of reaction time and accuracy, and the degree of subjective satisfaction were analyzed. The results showed that main effects on task performances were not different significantly; however, perceived usability of music condition was better than sound condition, which was better than silence condition. It means that musical user interface improves perceived usability while not interfering task performance. This study provides a basis of emotional and aesthetic effects of music in home appliances design, and can be applied to studies for the blind. More specific guideline for the musical user interface can be drafted if further studies consider more various tasks, context, musical structure and types for the appliances.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.105-112
• /
• 2017

PCI Express is a bus technology that connects the processor and the peripheral I/O devices that widely used as an industry standard because it has the characteristics of high-speed, low power. In addition, PCI Express is system interconnect technology such as Ethernet and Infiniband used in high-performance computing and computer cluster. PGAS(partitioned global address space) programming model is often used to implement the one-sided RDMA(remote direct memory access) from multi-host systems, such as computer clusters. In this paper, we design and implement a OpenSHMEM API based on PCI Express maintaining the existing features of OpenSHMEM to implement RDMA based on PCI Express. We perform experiment with implemented OpenSHMEM API through a matrix multiplication example from system which PCs connected with NTB(non-transparent bridge) technology of PCI Express. The PCI Express interconnection network is currently very expensive and is not yet widely available to the general public. Nevertheless, we actually implemented and evaluated a PCI Express based interconnection network on the RDK evaluation board. In addition, we have implemented the OpenSHMEM software stack, which is of great interest recently.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.98-105
• /
• 2013

This paper presents a finite-difference time-domain(FDTD) simulation and a data processing technique for radar sensing of the internal structure of a wall using an ultra-wide band antenna. We first designed an ultra-wide band anti-podal vivaldi antenna with a frequency range of 0.3~7 GHz which is chosen to be relatively low after considering the characteristics of wave attenuation, wall penetration, and range resolution. In this study the two-dimensional FDTD technique was used to simulate a wall-penetration-radar experiment under practical conditions. The next, the measured radiation pattern of the practical antenna is considered as an equivalent source in the FDTD simulation, and the reflection data of a concrete wall and targets are obtained by using the simulation. Then, a data processing technique has been applied to the FDTD reflection data to get a radar image for remote sensing of the internal structure of the wall. We compared the two different source excitations in the FDTD simulation; (1) commonly-used isotropic point sources and (2) polynomial curve fitting sources of the measured radiation pattern. As a result, when we apply the measured antenna pattern into the FDTD simulation, we could obtain about 2.5 dB higher signal to noise level than using a plane wave incidence with isotropic sources.