• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.100-113
• /
• 2005

Leaf color and plant vigor are key indicators of crop health. These visual plant attributes are frequently used by greenhouse managers, producers, and consultants to make water, nutrient, and disease management decisions. Remote sensing techniques can quickly quantify soil and plant attributes, but it requires humans to translate such data into meaningful information. Over time, scientists have used reflectance data from individual wavebands to develop a series of indices that attempt to quantify things like soil organic matter content, leaf chlorophyll concentration, leaf area index, vegetative cover, amount of living biomass, and grain yield. The recent introduction of active sensors that function independent of natural light has greatly expanded the capabilities of scientists and managers to obtain useful information. Characteristics and limitations of active sensors need to be understood to optimize their use for making improved management decisions. Pot experiments involving sand culture were conducted in 2003 and 2004 in a green house to evaluate corn and red pepper biomass. The rNDVI, gNDVI and aNDVI by ground-based remote sensors were used for evaluation of corn and red pepper biomass. The result obtained from the case study was shown that ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season crop nitrogen management providing both spatial and temporal information.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.177-183
• /
• 2000

The Landsat Thematic Mapper (TM) has suggested that spatial and spectral characteristics would be suited to evaluate water quality of lake. But, TM has not been commonly used for the analysis of in-land water quality, such as surface water temperature, chlorophyll-a, suspended sediments, and Secchi depth in domestic research. This paper summarizes the analysis of Landsat 5 - TM image collected on 22 Feb 1996 for evaluation of chlorophyll-a and surface temperature in the Lake Soyang. And, field measurements collected in the Lake Soyang were used to obtain water optical algorithms for calibration of satellite data. It is concluded that we can assess chlorophyll-a with remote sensing reflectance and surface temperature with thermal band in lake Soyang. However, surface temperature calculated with thermal band of Landsat TM are underestimated. Relationship between remote sensing reflectance and chlorophyll-a using the ratio of TM band 1 and band 3 is as follows; Y = 17.206 - 6.4711 * (Rrs(band1) / Rrs(band3)) $R^2$=0.8762 and, using the ratio of TM band 1 and band 2 as follows; Y = 57.77 - 35.771 * (Rrs(band1) / Rrs(band2)) $R^2$=0.8317.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.63-72
• /
• 2005

In order to understand regional wind characteristics and to estimate offshore wind resources, a wind map of the Korean Peninsula was established using remote-sensing data from the satellite, U.S. NASA Quik SCAT which has been deployed for the Sea Winds Project since 1999. According to the linear regression result between the wind map data and in-situ marine-buoy data, the correlation factor was greatly improved up to 0.87 by blending the remote-sensing data of Quik SCAT with U.S. NCEP/NCAR CDAS reanalysis data to eliminate precipitation interference and to increase temporal resolution. It is found from the established wind map that the wind speed in winter is prominent temporally and the South Sea shows spatially high energy density over the wind class 6. The reason is deduced that the north-west winds through the Yellow Sea and the north-east winds through the East Sea derived by the low pressure developed in Japan are accelerated passing through the Korea Channel and formed high wind energy region in the South Sea; the same trends are confirmed from the statistical analysis of the meteorological observation data of KMA.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.604-610
• /
• 2010

Experiments in electrical engineering should mirror the key components of successful research and development: Understand the basic theory needed, test the resulting concepts by simulation and verify these, finally, in the experiment. For optimal learning outcome continuous monitoring of the progress of each individual student is necessary, immediately repeating those subjects which have not been learned successfully. Classically, this is the task of the teacher. In case of remote-controlled experiments this monitoring process and the repetition of subjects should be automated for optimal learning outcome. This paper describes a remote-controlled experiment combining theory, simulation and the experiment itself with an automated monitoring process. Only the evaluation of the experimental results and their comparison to the simulation results has to be checked by a teacher. This paper describes the details of the educational structure for a remote-controlled experiment introducing active filtering of harmonics. For better understanding the content of the learning material (theory and simulation) as well as the results of the experiment and the underlying booking system are shortly presented.

• Korean Journal of Remote Sensing
• /
• v.8 no.2
• /
• pp.105-123
• /
• 1992

A study was made on the feature extraction for non-metallic one deposits and their related geology using the Remote Sensing and Airborne Radiometric data. The area chosen is around the Haenam area, where dickite and Quarzite mines are distributed in. The geology of the area consists mainly of Cretaceous volcanics and PreCambrian metamorphic. The methods applied are study on the reflectance characteristics of minerals and rocks sampled in the study area, and the feature extraction extraction of histogram normalized images for Landsat TM and Airborne Radiometric data, and finally evaluation of applicability of some useful pattern recognition techniques for regional lithological mapping. As a result, reflectances of non-metallic minerals are much higher than rock samples in the area. However, low grade dickites are slightly higher than rock samples, probably due to their greyish colour and also their textural features which may scatter the reflectance and may be capable of capturing much hychoryl ions. The reflectances of rock samples may depend on the degree of whiteness of samples. The outcrops or mine dumps in the study area were most effectively extracted on the histogram normalized image of TM Band 1, 2 and 3, due to their high reflectivity. The Masking technique using the above bands may be the most effective and the natural colour composite may provide some success as well. The colour composite image of PCA may also be effective in extracting geological features, and airborne radiometric data may be useful to some degree as an complementary tool.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2011

The remote-sensng campaign was performed at the Pohang Accelerator Laboratory where is located in a basin 6km inland from Yeongil Bay. The campaign aimed uncertainty assessment of Remtech PA0 SODAR through a mutual comparison with WindCube LIDAR, the remote-sensing equipment for wind resource assessment. The joint observation was carried out by changing the setup for measurement heights three times over two months. The LIDAR measurement was assumed as the reference and the uncertainty of SODAR measurement was quantitatively assessed. Compared with LIDAR, the data availability of SODAR was about half. The wind speed measurement was fitted to a slope of 0.94 and $R^2$ of 0.79 to the LIDAR measurement. However, the relative standard deviation was about 17% under 150m above ground level. Therefore, the Remtech PA0 SODAR is judged to be unsuitable for the evaluation of wind resource assessment and wind turbine performance test, which require accuracy of measurement.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.163-177
• /
• 2019

As inter-Korean relations progress, the issue of natural disasters which could directly affect the lives of the people in both Koreas, has not yet been discussed. Considering the current status of inter-Korean relations and the ongoing disaster-related damage in North Korea, it is imperative to establish a technical plan at the pan-governmental level to reduce the damage from natural disasters. The purpose of this study is to secure the Korea Peninsula against natural disasters by organizing South Korea's science and technologies related to natural disasters in order to reduce the damage, and to evaluate the applicability of said technologies. The situation of natural disasters in North Korea for 17 years has been summarized and reclassified based on eight types of natural disasters. Technologies related to natural disasters in South Korea were also investigated and reclassified. Based on the data, a priority evaluation was performed and the prioritization of technology application for each natural disaster type in North Korea was calculated through a quadrant analysis. As a result, the three major categories of high-priority technologies were classified as natural disaster monitoring with remote sensing and spatial information technology, construction of research basis and database based on geographic information system (GIS) and integrated management of complex natural disasters.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.6
• /
• pp.63-69
• /
• 2009

The decentralized and open characteristic of the internet, along with the mobility and portability of mobile communication, and the interactivity of the internet and mobile communications all have been grafted to enable the creation of wireless internet in our lives, bringing about a lot of change. However, existing system management software solutions show limitations in time and space, as well as problems such as uncertain error messages, and also difficulty providing swift assistance or real time emergency support. Therefore, a wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone, Webpad) for realtime control. The implemented real time wireless remote control system provides remote server management functions, error or event message functions, log record functions, authentication function via mobile devices and system performance evaluation function classified by client transaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.148-154
• /
• 2016

Video security has recently emerged as an important issue owing to CCTV video image spill accidents over the Internet. KISA recommends the use of encryption protocols for remote access through its guidelines for CCTV personal video information protection. But still, many products do not adhere to the guidelines, and those products are easily exposed to security threats, such as hacking. To solve these security vulnerabilities, this paper proposes a CCTV system that connects from remote locations, and is implemented by using secure shell (SSH) tunneling techniques. The system enhances security by transmitting encrypted data by using SSH. By using the tunneling technique, it also solves the problem of not being able to access a CCTV recorder located inside a firewall. For evaluation of the system, this paper compares various CCTV remote access schemes and security. Experimental results on the effectiveness of the system show it is possible to obtain remote access without a significant difference in transmission quality and time. Applying the method proposed in this paper, you can configure a system secure from the threats of hacking.

• Archives of design research
• /
• v.17 no.3
• /
• pp.147-156
• /
• 2004

Currently, usability tests for web sites with representative users are conducted in laboratory environment that disturbs subjects' natural behavior. These test methods are inefficient for tests that require large number of subjects, because experimenters and subjects should be located in the same place at the same time during the test. In this study, a remote usability test tool, called 'RIO' has been developed to cope with these laboratory-based experiment problems - the 'synchronism' and the 'unnatural environment'. The tool is separated into three parts: 'Project Manager', 'Remote Interaction Observer', and 'Interaction Analyzer'. 'Project Manager' sets up overall experimental parameters and actual tasks to be peformed by subjects. 'Remote Interaction Observer', endued with Microsoft Internet Explorer Control, is a modified Web Browser which records user interactions, screen images and elaborate browser events while subject performs given tasks. This module is distributed to subjects as an installable software package. When they finish all the tasks, the captured interaction data is compressed and sent to 'Interaction Data Server' automatically. 'Interaction Analyzer' visualizes interaction data from the 'Interaction Data Server'. It also generates project-scope statistics which facilitate discovering peculiar cases among interaction submissions.