• 한국컴퓨터정보학회논문지
• /
• 제16권1호
• /
• pp.117-124
• /
• 2011

본 논문은 생체 센서 시스템(bio-physical sensor system)을 이용하여 홈 네트워크 시스템을 구성하고, 생체 신호가 전달되도록 생체 신호 원격용 네트워크를 구현하였다. 측정 시스템의 구성조건은 시각(Vision), 체성감각(Somatosensory), 전정기관(Vestibular), 중추신경계통(CNS)의 변위점에서 평가하고, 맥박(Heart Rate), 체온(Temperature), 체중(Weight)을 기본 측정항목에 사용하였다. 주파수 변동에 따른 0.01 단위로 측정하여 평균값을 가지고 기준치에 비교하여 설정환경을 구성하고 측정값을 결정하였다. 생체 신호는 신체의 균형조절기능인 신경생리학적 감각처리 및 운동 출력기전으로 시각, 체성감각, 전정기관, 중추신경계통, 체질량지수(BMI)의 신체적 감각 기관의 수용체들 간의 운동에 대한 균형과 자세를 통한 기준으로 정상적인 균형 조절 상태와 균형의 크기 형태로 구분하고, 건강의 상태를 확인하도록 의미를 부여하였다. 본 연구의 결과로 제안한 홈 네트워크를 통해 헬스 센터 및 건강관리 중앙 시스템에 단말기를 통하여 전송됨으로 전문가을 통한 건강 관리시스템이 진행되는 결과를 얻을 수 있고, 다양한 신체적 파라메타를 통한 원격네트워크 모니터링 기능의 관리시스템이 형성 될 것으로 추론 할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.868-871
• /
• 1995

In order to remain competitive, a manufacturing company needs to maintain the optimal condition of its manufacturing system. Machine tools as an important element of a manufacturing system comprises complex mechanical as well as electronic components. Therefore, diagnosing the troubles of machine tools is a tricky process which requires a lot of experience and knowledge. Since providing machine tool users with necessary services at the right time is very difficult and expensive, a remote diagnosis system is to be regarded as a good alternative,with which users can diagnose and fix the machine troubles. This paper presents a framework for a remote machine tool diagnosis system using the world wide web technology and backward reasoning expert system.

• Smart Structures and Systems
• /
• 제5권4호
• /
• pp.381-395
• /
• 2009

The paper presents a case study in which the structural condition assessment of the East Bay bridge in Gibsonton, Florida is evaluated with the help of remote health monitoring techniques. The bridge is a four-span, continuous, deck-type reinforced concrete structure supported on prestressed pile bents, and is instrumented with smart Fiber Optic Sensors. The sensors used for remote health monitoring are the newly emerged Fabry-Perot (FP), and are both surface-mounted and embedded in the deck. The sensing system can be accessed remotely through fast Digital Subscriber Lines (DSL), which permits the evaluation of the bridge behavior under live traffic loads. The bridge was open to traffic since March 2005, and the collected structural data have been continuously analyzed since. The data revealed an increase in strain readings, which suggests a progression in damage. Recent visual observations also indicated the presence of longitudinal cracks along the bridge length. After the formation of these cracks, the sensors readings were analyzed and used to extrapolate the values of the maximum stresses at the crack location. The data obtained were also compared to initial design values of the bridge under factored gravity and live loads. The study showed that the proposed structural health monitoring technique proved to provide an efficient mean for condition assessment of bridge structures providing it is implemented and analyzed with care.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.11-20
• /
• 1991

본(本) 연구(硏究)는 인체(人體)에 해(害)로운 농약(農藥)으로 부터 운전자(運轉者)를 보호(保護)하기 위하여 무인(無人) 스피드 스프레이어를 개발(開發)할 목적(目的)으로 수행(遂行)하였으며 무선(無線) 전파(電波) 리모콘에 의한 원격제어(遠隔制御) 시스템을 개발(開發)하기 위하여 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 234채널, 16명령을 발신(發信)할 수 있는 VHF 대 전파(電波) 리모콘을 제작(製作)하여, 스피드 스프레이어의 원격제어(遠隔制御)에 편용가능(便用可能)하였다. 2. 시판(市販)되고 있는 무선전화기(無線電話機)의 방식(方式)인 DTMF방식(方式)을 채용(採用)한 무선 리모콘을 사용(使用)할 경우 시판 무선전화기(無線電話機) 사용(使用)이 가능(可能)하여 송수신(送受信)기의 별도(別途) 제작(製作)이 필요 없는 잇점이 있었다. 3. 무선(無線) 전파(電波) 리모콘과 원칩 마이크로 컴퓨터를 이용(利用)하여 염가(廉價)이고 컴팩터한 원격조종(遠隔操縱) 조향장치(操向裝置) 및 원격조종(遠隔操縱) 변속장치(變速裝置), 원격조종(遠隔操縱) 약액(藥液) 살포장치(撒布裝置) 등(等)의 원격제어(遠隔制御) 시스템 제작(製作)이 가능(可能)하였다.

• International Journal of Railway
• /
• 제2권4호
• /
• pp.187-192
• /
• 2009

Running test of the Korean High-Speed Train using remote controlled measuring system have been executed on the high speed track in order to evaluate and verify the performance of the train. In this paper, influencing factors on the contact force which represents dynamic characteristics between the pantograph and contact wire are analyzed, according to the track condition, span type and running condition. By the analytical study on the test data, we figured out that contact force and dynamic characteristics of the pantograph are mainly affected by running behavior of the train and the span distance which the train passes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.122-131
• /
• 1995

Load test for newly introduced precast segmental bridge is carried out to experimentally evaluate load carrying capacity, Analysis accompanied with the test is also performed and the results are used in the evaluation. In addition to initial evaluation of the bridge by load test, remote dynamic monitoring system to perform realtime assessment of the bridge condition is also under development. In this paper the procedure and results of load test and evaluation are presented along with introduction of dynamic monitoring system.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.42-49
• /
• 2009

This study proposes a web-based remote monitoring system for evaluating degradation of machine tools using ART2(Adaptive Resonance Theory 2) neural network. A number of studies on the monitoring of machine tools using neural networks have been reported. However, when normal condition is changed due to factors such as maintenance, tool change etc., or a new failure signal is generated, such algorithms need to be entirely retrained in order to accommodate the new signals. To cope with such problems, this study develops a remote monitoring system using ART2 in which new signals when required are simply added to the classes previously trained. This system can monitor degradation as well as failure of machine tools. To show the effectiveness of the proposed approach, the system is experimentally applied to monitoring a simulator similar to the main spindle of a machine tool, and the results show that the proposed system can be extended to monitoring of real industrial machine tools and equipment.

• 한국멀티미디어학회논문지
• /
• 제24권2호
• /
• pp.267-273
• /
• 2021

Recently, the small-size mobile robots with remote-control are rapidly growth which market of mobile is increased in the world. Especially, the smart-phones are widely used for interface device in the small size of a mobile robot. The research goal is control system design which is applied to miniaturization of a mobile robot using smart-phone and it can be confirmed performance for designed system. Meanwhile, the fabrication of mini-mobile robot can also be remote-control operation through the WIFI performance of a smart-phone. The smart-phone is used to remote-control for robot operation which control data transmit to robot via the WIFI network. To drive the robot, we can observe by the smart-phone screen and it can easily adjust the robot drive condition and direction by smart-phone button. Consequentially, there was no malfunction and images were printed out well. However, in drive, because of blind spot, robot was bumped into obstacle. Therefore, the additional test is necessary to sensor for blind spot which sensor can be equipment to mobile robot. In addition, the experiment with robot object recognition is needed.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.969-976
• /
• 2004

Building energy saving is one of the most important issues in these days. Energy saving control strategies should be developed properly to achieve the saving. One of such area we could apply is the HVAC (Heating, Ventilation and Air-Conditioning) system. Through the optimal control algorithm for building energy management system (EMS), you can not only save the cost of building energy, but also protect HVAC system components against the unexpected condition. In order to verify the effectiveness of building energy saving, field test was accomplished for several months at 'A' building. And to get the measured data, remote control was used. If the remote control is used in BAS (Building Automation System), control and monitoring can be done for all of the building systems, such as HVAC, power, lighting, security and fire-alarm etc. anywhere any time. Using the remote control, Control and monitoring is possible for the testing system without going there. As the results of field test, we could reduce $5{\sim}10\%$ of the building energy cost.