• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.555-559
• /
• 2001

A by-product, waste sludge water produced from ready mixed concrete(remicon) factories may affect our environmental contamination if it is discharged without proper waste disposal. In Korea, all waste sludge water has been recycled in the way of mixing water of remicon, but the quality of the concrete then produced can be deteriorated, so it might cause slump loss or irregular compressive strength. In this study, waste sludge water is divided into two parts, remicon sludge and residual water in order to make it's property more stable. Then, the remicon sludge and high-alkaline residual water were used as admixture and alkali activator respectively. In this paper we research about quality of with remicon sludge and residual water and performed the fundamental properties of cement matrix mixed with remicon sludge and residual water.

• 한국인터넷방송통신학회논문지
• /
• 제19권2호
• /
• pp.111-117
• /
• 2019

본 논문에서는 레미콘 현장검사 시 스마트폰으로 검사와 대응이 가능하도록 모바일 레미콘 품질 관리 시스템을 제안하였다. 그리고 현장검사를 디지털화하기 위한 실시간 슬럼프 데이터 처리 부분과 서버와의 데이터 교환을 위한 XML 포맷을 제안하였다. 스마트폰을 이용하여 레미콘 현장검사의 영상을 실시간으로 전송하여 오류를 판단하였으며, 이렇게 함으로써 현장과 본사에서 레미콘 제품의 이상 여부를 공유하였다. 개발 대상 기술은 실제 결과 값을 기반으로 영상 이미지 분석 등을 통하여 제품에 대한 이상 여부가 판단되며 회사 및 현장에 적합한 정보 제공이 가능하다. 레미콘 품질 데이터 분석을 기반으로 원자재 관리 데이터와 연동함으로써 레미콘 업종의 가장 큰 문제 사항인 원자재 반입에 따른 실시간 최적의 배합비율 제시가 가능하다.

• 대한토목학회논문집
• /
• 제34권6호
• /
• pp.1743-1751
• /
• 2014

라텍스 첨가는 콘크리트의 압축 및 휨거동, 부착강도, 염화물 저항성 및 동결융해 저항성의 향상을 유도할 수 있는 것으로 알려져 있다. 이러한 이유로, 기존 포장 콘크리트 보다 LMC에 관한 많은 연구가 진행되고 있다. 그러나 소음이나 공사비용등을 비롯한 문제점 때문에 LMC의 성능을 향상시키기 위한 새로운 방법들이 시도되고 있으며, 최근, LMC의 문제점을 해결하고자 레미콘 LMC가 개발되었다. 본 연구에서는 레미콘 LMC의 내구성을 라텍스와 광물질 첨가제의 혼입 비율에 따라 비교하였다. 실험결과, 레미콘LMC는 압축강도, 휨강도, 부착강도가 한국 도로공사 전문 시방서 기준을 만족하였으며, 레미콘LMC의 내구성은 우수한 것으로 나타났다. 또한, 레미콘LMC에 라텍스를 8% 이상 혼입해야 기존 LMC와 동등 이상의 내구성을 확보하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1248-1251
• /
• 2000

Recently, the yearly amount of remicon used in Korea is approximately one hundred million cubic meter, and it caused a by-product, remicon waste sludge. The sludge produced by washing mixers or drums of remicon trucks is restrained by the law for waste disposal because its pH is over 12, so the expense for waste disposal is needed. Until now, the waste sludge water has been recycled and used for concrete materials as sludge water which is limited to 3% of cement unit weight. However, the study on the properties of the concrete mixed with this waste sludge is so insufficient that the quality of them can be hardly trusted. Therefore, the study on that will be discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.171-180
• /
• 2007

현장에서의 레디믹스트 콘크리트(이하 레미콘) 품질에 대한 신뢰도의 정량적 평가를 위해 동일 규격 레미콘에 대하여 타설시기에 따른 슬럼프값, 공기량, 염분함유량 및 재령에 따른 압축강도의 품질 특성값의 변동정도를 비교하고 각각의 시험값들을 통계적인 분석도구를 이용하여 그 품질변동 요인 및 품질값을 분석하였다. 이러한 분석 결과를 통해 7일강도와 28일강도 사이의 상관식과 공기량 및 슬럼프의 품질 신뢰도를 파악하였으며 이에 대한 결과 고찰 및 콘크리트 품질 확보를 위한 관리방안을 모색하고자 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.21-26
• /
• 2004

This study deals with the Hydrated Ability of the Ready-Mixed Concrete's Sludge which is the recycling technology of that sludge. The experiment gathers sludge from Ready-mixed factory. shatters these into pieces in dry condition and understands the differences between current using Portland cement. And then. this examines the possibility of the recycle as a bonding agent through the Compressive Strength and considers the recovery of the hydration. This experiment concludes the same Chemical Composition with the normal Portland cement. while. under the appropriate procedure in hydration recovery. this sludge can be used as the bonding agent in cement. The chemical composition of solid Remicon sludge shows that it has 1.8 times $SiO_2$ than the normal Portland cement. meaning lots of aggregate in Remicon sludge. Also. the specific gravity of Remicon sluge increases with the rise of Baking Temperature and has no difference between 2.77 and 2.94. The mortar flow used for combining the baking material of Remicon sludge does was not changed and is the highest between $750^{\circ}C{\cdot}120min\;and\;800^{\circ}C{\cdot}180min$. Additionally. the Compressive Strength increases with the age, certifying the same Hydrated Ability like cement and the best condition for hydration is $750^{\circ}C{\cdot}120min.$

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.39-46
• /
• 2015

REMICON(Ready Mixed Concrete), the most essential material of construction work, is produced from facility called "Batcher plant." In order to produce Remicon, Batcher Plant needs to be supplied with basic raw material such as ballast, sand, cement, admixture and water. In remicon industry, overland transport vehicles are used during the whole manufacturing process from producing to infilling at the construction site. Thus, the transportation cost sums up be to 20 percent of whole manufacturing cost and transport capacity and distance travelled have direct and major effect on manufacturing costs. This paper suggests a method to find optimal location of batcher plant using modified Steiner point, suggesting the most effective and flexible connection through among construction site, aggregate, cement and remicon producing plant. This paper also proposes reducing of transport cost at maximum 60% by calculation through optimized plant location. The modified Steiner point theory proposed in this paper also can be applied to optimal location of a $2^{ry}$ substation or MCC panel for minimizing of power loss, voltage drop, line distance and etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.82-83
• /
• 2017

The samll-medium sized cities do not have enough infrastructure for the construction work, especially in terms of concrete supply. This research surveyed the capacity of remicon companies in Gunsan related with production and delivery. Their production capacity is bigger than the daily quantity required, however the delivery capacity is not enough to supply the daily quantity required and it is inevitable to use the several remicon using different admixture. It might cause the harm to the structure. This research studied the way to remove the quality risk when using different admixture at the same time.

• 레미콘
• /
• 9호통권17호
• /
• pp.83-87
• /
• 1988

• 레미콘
• /
• 3호통권19호
• /
• pp.83-89
• /
• 1989