• Safety and Health at Work
• /
• 제15권1호
• /
• pp.24-32
• /
• 2024

Background: Learning from incidents for accident prevention is a two-stage process, involving the investigation of past accidents to identify the causal factors, followed by the identification and implementation of remedial measures to address the identified causal factors. The focus of past research has been on the identification of causal factors, with limited focus on the identification and implementation of remedial measures. This research begins to contribute to this gap. The motivation for the research is twofold. First, previous analyses show the recurring nature of accidents within the Ghanaian mining industry, and the causal factors also remain the same. This raises questions on the nature and effectiveness of remedial measures identified to address the causes of past accidents. Secondly, without identifying and implementing remedial measures, the full benefits of accident investigations will not be achieved. Hence, this study aims to assess the nature of remedial measures proposed to address investigation causal factors. Method: The study adopted SMARTER from business studies with the addition of HMW (H - Hierarchical, M - Mapping, and W - Weighting of causal factors) to analyse the recommendations from 500 individual investigation reports across seven different mines in Ghana. Results: The individual and the work environment (79%) were mostly the focused during the search for causes, with limited focus on organisational factors (21%). Forty eight percentage of the recommendations were administrative, focussing on fixing the problem in the immediate affected area or department of the victim(s). Most recommendations (70.4%) were support activities that only enhance the effectiveness of control but do not prevent/mitigate the failure directly. Across all the mines, there was no focus on evaluating the performance of remedial measures after their implementation. Conclusion: Identifying sharp-end causes leads to proposing weak recommendations which fail to address latent organisational conditions. The study proposed a guide for effective planning and implementation of remedial actions.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2001년도 정기총회 및 제3회 특별지포지움
• /
• pp.90-93
• /
• 2001

다양한 토양 오염 복원 기술이 개발되었고 여러 가지 제한 요인을 제거하는데 주력 해왔다. 결정 요인 중 하나인 지구물리학적 특성 중 투수계수, 전기전도도, 열전도도를 이용한 복원 공법에 대해 재고해 보았다. 복원 대상이 되는 토양내 여러 가지 특성을 이해하고 그의 분포에 대한 정확한 정보를 가지고 있을 때, 가장 효율적인 공법의 선택이 가능하다.

• 복식문화연구
• /
• 제18권2호
• /
• pp.217-228
• /
• 2010

The purpose of this study was to examine the post-purchasing behavior focusing on dissatisfaction and complaint behavior. There were some studies concerning dissatisfaction in on-line shopping related to satisfaction and intention to re-buying, but did not focus the relationship with complaint behavior, or identified the factors specifically related to consumer's dissatisfaction. In this study, it was examined to minimize the consumer's dissatisfaction and complaint behavior by investigating the detailed factors relating dissatisfactions and complaint behaviors after shopping apparel goods on the internet. Two hundred fifty five customers who had purchased fashion products in internet shopping had participated in this study. The data was analyzed by factor analysis, regression analysis using SPSS program. As the result, first, product, delivery, returning and price factor were extracted as factors of dissatisfaction, and as factors of complaint behavior, legal action, private action, remedial action were investigated. Second, dissatisfaction was significantly effected on complaint behavior. Specially, returning factor and price factor had effect on legal action, product, delivery factor had on private action and returning factor had affected remedial action. Third, more purchasing frequency, less dissatisfaction. Also, female had more dissatisfaction than male. Finally, more dissatisfaction and compliant behavior, less repurchasing intention. Based on these results, internet shopping fashion marketing strategies were suggested.

• 한국임상보건과학회지
• /
• 제9권2호
• /
• pp.1486-1492
• /
• 2021

Purpose: By investigating oral health knowledge and oral health behavior of orthodontic patients, we intend to identify factors that affect their satisfaction with orthodontic treatment and use them as fundamental data for improving the satisfaction of orthodontic patients. Methods: Busan from February 1st to March 31st, 2021. Dental disease in Gyeongsangnam-do. A self-contained survey was conducted on patients undergoing orthodontic treatment in the clinic. A total of 185 copies were analyzed. Using the lBM SPSS Statistics 21 program, multiple regression analysis was conducted by setting oral health knowledge and oral health behavior as independent variables to determine factors affecting remedial treatment satisfaction. Results: The satisfaction level of orthodontic treatment was 1.53 points higher than 'understanding the cost of orthodontic treatment' and 'smooth relationship with related staff while receiving orthodontic treatment' was low at 1.23. The average calibration satisfaction was 1.34. Factors affecting remedial treatment satisfaction were shown in the order of oral health behavior (p<0.000), educational experience (p<0.010), gender (p<0.015) and oral health knowledge (p<0.020). Conclusions: Through the above results, it is necessary to develop programs to improve oral health knowledge through customized individual oral health education by enhancing individual oral health behaviors of individuals.

• Environmental Engineering Research
• /
• 제13권1호
• /
• pp.33-40
• /
• 2008

Levels of arsenic in stream and reservoir waters affected by an abandoned gold mine were examined. The abandoned mine has been left without proper civil and remedial works preventing potential environmental hazards. Field and laboratory chemical analyses revealed that the stream waters downgradient from the mine area were severely contaminated with arsenic and furthermore the reservoir water, 2-3 km away from the mine, also contained substantial levels of As, far exceeding the Korean stream water standard. Relatively higher pH values (6.5-9.4) enhanced mobility of As and mainly sustained substantial As concentration in waters. Chemistries of the stream water, groundwater and reservoir water were dominated by two main factors including effects of mine effluent and anthropogenic agricultural activities. Considering that there has been a substantial As input to the reservoir and the reservoir water has been used for agricultural and domestic uses, immediate remedial works are essentially required.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1999년도 추계학술발표회
• /
• pp.28-31
• /
• 1999

The purpose of this study is to see the effect of microbial population and dynamics of the indigeonous microorganisms on hydrocarbon contaminated areas. The microbial structures and activities to determine the microbial capabilities of the contaminated sites are very important for the remedial action technology selection. Throughout microbial studies on different conditions by ETS(Electron Transport System) and microbial activity analysis, it was found that aeration and water contents are the most important factors in this site remediation. According to test results, Burkholderia spp. was dominant species, and acclimation is also an important factor for the accerelated biodegradation.

• 대한환경공학회지
• /
• 제36권9호
• /
• pp.659-666
• /
• 2014

본 연구는 유류오염토양 정화를 위해 널리 사용되는 토양경작법의 표준 설계방안을 제안하고자 하였다. 표준설계방안은 토양특성 파악 및 오염부피 산정, 영양분 및 미생물 투입량 결정, 분해속도 실증실험을 통한 정화기간 산정 등으로 크게 구분하여 진행할 것을 제안한다. 그리고 그동안 설계자간 다양하게 사용되고 있는 오염토양 부피 산정절차, 오염토양 대표 초기농도결정 방법, C : N : P 영양염류 투입량 결정방법 등에 대한 표준화 방안을 제시하였다. 시범지역에 대한 토양특성 및 오염부피를 산정한 결과 유류오염지역의 토성은 사질 식양토와 사양토로 분류되었으며, 총질소 농도는 57.01 mg/kg, 총인은 83.40 mg/kg, 유류분해미생물은 $1.78{\times}10^4$ (CFU/g dry soil), 정화대상 토량은 $4,092m^3$으로 산정되었다. 시범적용지역의 모든 오염토양을 토양경작장(15 m(가로) ${\times}$ 40 m(세로)에서 1 m 높이로 적치하여 정화할 경우 약 9배치로 처리가 가능한 것으로 평가되었다. 오염토양 1배치의 처리기간은 35일이 소요될 것으로 판단되며, 대상 지역의 모든 오염토양은 토양경작법으로 처리하는 경우 총 315일이 소요될 것으로 예상된다. 오염토양의 정화를 위해 필요한 미생물제제의 양은 4,025 L이며, 요소비료는 총 4,642 kg가 소요될 것으로 판단된다.

• 보존과학연구
• /
• 통권24호
• /
• pp.5-28
• /
• 2003

Stone has been one of the most intensely studied materials in conservation. Understanding the deterioration of stone needs various knowledge in different mineralogical and physical characteristics and its weathering response under different climate and environment. The alteration and weathering of stone is affected by natural or artificial elements whether they are physical, chemical or biological damaging factors. It can be said that the bio deterioration of stone is coupled with every environmental factors, which induce decomposition of stone structure, either directly or indirectly as a form of catalysis. Many elements contribute to the deterioration of stone monuments and other objects of cultural value such as pagoda, stature of Buddha, etc. This report concentrates on the action of biodeteriorative factorsincluding bacteria, algae and higher plants. Preventive and remedial methods and a selection of chemical treatments are also described.

• 한국식품위생안전성학회지
• /
• 제7권2호
• /
• pp.133-145
• /
• 1992

The sanitation inspection is the most frequently used procedure to protect foods prepared in foodservice establishments. In order to enhance foodservice inspections and to improve post-inspection remedial measures, more practical evaluation methods for sanitation are required. The HACCP approach is based upon factors which contribute to foodborne disease rather than of factors which relate to aesthetics. Contributing factors for foodborne diseases from food service establishments reported in USA, Candada, and England were analyzed to identify potential hazards during practical foodservice operations. Hazards were classified at critical control points by risk ranking, Twenty-two observable practical indicators relating to each contributing factor were selected and adjusted to standardized procedures and hazard determiners at critical control points, The weights for each inspection item were ranked as 1, 2, 3, 4, or 5 according to the risk level of contributing factors. And also application for the inspection item in different 6 types of work procedures were suggested for the use of specialized foodservice establishment and cafeteria, and of manager's self inspection in each establishment.

• 한국식품위생안전성학회:학술대회논문집
• /
• 한국식품위생안전성학회 1992년도 학술강연회
• /
• pp.33-45
• /
• 1992

The sanitation inspection is the most frequently used procedure to protect foods prepared in foodservice establishments. In order to enhance foodservioe inspections and to improve post-inspection remedial measures, more practical evaluation methods for sanitation are required. The HACCP approach is based upon factors which contribute to foodborne disease rather than on factors which relate to aesthetics. Contributing factors for foodborne disease from foodservice establishments reported in USA, Canada, and England were analyzed to identify potential hazards during practical foodservioe operations. Hazards were classified at critical control points by risk ranking. Twenty-two observable practical indicators relating to each contributing factor were selected and adjusted to standardized procedures and hazard determiners at critical contral points. The weights for each inspection item were ranked as 1, 2, 3, 4 or 5 according to the risk level of contributing factors. And also application for the inspection item in different 6 types of work procedures was suggested for the use of specialized foodservice establishment and cafeteria, and of manager's self inspection in each establishment.