• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.672-677
• /
• 1986

From April, 1984 to August, 1986, 214 cases of cardiovascular surgeries had been performed at Yeungnam University Hospital consisting 158 open heart surgeries and 56 non-open heart surgeries. The leading cardiac anomaly of open heart surgeries was ventricular septal defect which was 43% of congenital heart diseases, and most of remaining non-open heart surgeries were ligating patent ductus arteriosus. We had observed 33 postoperative complications such as wound problems, transient arrhythmia, postpericardiotomy syndrome, bleeding requiring reoperation and so on. 3 cases of surgical mortality were present [2 in congenital heart diseases and 1 in acquired heart disease], which resulting 1.9% of surgical mortality rate in the open heart surgeries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.118-122
• /
• 2004

The food wastes recycling system should be constructed before 2005. In order to manufacture the good compost, salt remaining rate should be minimized. We studied the effective method of minimizing salt ratio by diluting with water.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.1
• /
• pp.39-45
• /
• 2003

Objective : To identify the factors affecting the complete fetal loss following multifetal pregnancy reduction (MFPR). Design: Retrospective clinical study. Methods : A total of 256 consecutive treatments of MFPR in IVF-ET cycles performed between 1992 through 2000 in Samsung Cheil hospital were analyzed. MFPR was done around 8 weeks of gestation by transvaginal ultrasono-guided aspiration in multiple pregnancies and reduced to singleton or twins. Stepwise logistic regression was performed to identify the factors affecting the final outcome of pregnancy after MFPR. Dependent variable was complete fetal loss and the independent variables were maternal age, paternal age, initial number of gestational sac (iGSNO), initial number of fetal heart beat, the number of remaining live fetus after MFPR, and chorionicity. Results: The total survival rate was 87.9%, and total fetal loss rate after MFPR was 12.1%. Total fetal loss occurred within four weeks from MFPR procedure was 1.95%. Total loss occurred after four weeks of procedure and before 24 gestational weeks was 8.2%. Seventy nine percent (202/256) of pregnancies delivered after 34 weeks of gestation. The survival rate of pregnancies reduced to singleton was significantly higher than that of pregnancies reduced to twins (93.5% vs. 86.7%, p<0.05). The mean ($\pm$SEM) gestational age at delivery was $36.2{\pm}1.0$ and $34.1{\pm}0.5$ weeks for pregnancies reduced to singletons and twins, respectively (p=0.065). Logistic regression analysis revealed that the maternal age, the number of initial gestational sac (iGSNO), and the number of remaining live fetus after MFPR significantly affected the rate of total fetal loss (Z = 0.174'age + 0.596'iGSNO + 1.324'remaining fetuses -12.07), (p<0.05). Conclusions: MFPR seems to be a relatively safe and efficient method to improve the obstetric outcome in high order multiple pregnancy. Because the maternal age, the number of initial gestational sac and the remaining live fetuses after MFPR affect the total fetal loss rate, restriction of the number of transferred embryos according to the age and MFPR to singleton fetus could be considered for the better obstetric outcome in IVF pregnancy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.27-31
• /
• 2010

Purpose of study: The purpose of this study was to provide adequate diagnostic guideline for the maxillary sinuses prior to dental implant treatment for edentulous posterior maxillary areas. For this purpose, our procedure involves the estimation of the remaining alveolar bone height, the examination of the anatomical variation in the maxillary sinuses (e.g. sinus septum), and the evaluation of the incidence of preoperative pathological conditions in the maxillary sinuses. Materials and Methods: We selected 189 patients to undergo computerized tomography (CT) in order to account for the posterior maxillary anatomy found in patients of Korean ethnicity. We evaluated the following using Dentascan software: Remaining alveolar bone height, incidence of sinus septum, and rate of preoperative pathologic conditions in the maxillary sinus. The average amount of remaining alveolar bone height was analyzed using the student's t-test for differences according to anatomical site, and the ANOVA was used for the differences according to age group with the level of significance set at 0.05. Results: Alveolar bone heights of upper first premolar, second premolar, first molar, and second molar was 12.24 mm, 10.37 mm, 7.16 mm, and 7.15 mm, respectively with statistical significance (P < 0.05). Incidence of sinus septum as an anatomic variation was 17 out of 189 cases (9.0%). Incidence of mucosal thickening as a pathologic variation was 82 out of 189 cases (43.4%). Conclusion: In treatment planning of posterior maxillary edentulous area of Koreans, the consideration of augmentation surgery for maxillary sinus is required in maxillary molar area before dental implant installation, and preoperative screening of the asymptomatic maxillary sinuses can be regarded as a reasonable preoperative procedure in the planning of dental implant treatment on the posterior maxillary edentulous area.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.113-116
• /
• 2009

This study analyzed fire-resistant characteristics according to changes in repair methods of PFH mixed high-strength concrete roof structures having undergone fire damage. The results of the study are as follows. First, as a repulsive characteristics of structures, the remaining repulsion was shown to increase following fire-resistance tests according to increases in depth of coverings. The results of the relationship between depth of coverings and remaining repulsion rates following fire-proofing tests showed a high correlation. At a covering depth of 67.3mm, remaining repulsion rate was estimated to be 100%. For fire-resistant characteristics following repairs of structure, as for spalling, severe separation was shown in the case of general plaster while general plaster + Metal Lath showed overall superior spalling prevention. For internal structure temperatures, general plaster showed max temperatures of 705℃, average temperatures of 636℃ while general plaster + metal lath showed max temperature of 660℃ and average temperature of 520℃, demonstrating lower temperature distributions than use of only general plaster. In conclusion, after removing the covering of structures damaged due to high temperatures of fires within high-strength concrete installations, the use of fire-resistant mortars and applying metal laths on surfaces of general plaster will provide superior fire-resistance performance in the occurrence of a 2nd fire.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.714-720
• /
• 2021

The ITL (information theoretic learning) based on the kernel density estimation method that has successfully been applied to machine learning and signal processing applications has a drawback of severe sensitiveness in choosing proper kernel sizes. For the maximization of correntropy criterion (MCC) as one of the ITL-type criteria, several methods of adapting the remaining kernel size ( ) after removing the term have been studied. In this paper, it is shown that the main cause of sensitivity in choosing the kernel size derives from the term and that the adaptive adjustment of in the remaining terms leads to approach the absolute value of error, which prevents the weight adjustment from continuing. Thus, it is proposed that choosing an appropriate constant as the kernel size for the remaining terms is more effective. In addition, the experiment results when compared to the conventional algorithm show that the proposed method enhances learning performance by about 2dB of steady state MSE with the same convergence rate. In an experiment for channel models, the proposed method enhances performance by 4 dB so that the proposed method is more suitable for more complex or inferior conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1151-1156
• /
• 2023

In this paper, we propose a deep learning model that utilizes charge/discharge data from initial lithium-ion batteries to predict the remaining useful life of lithium-ion batteries. We build the DMP using the PNP model. To demonstrate the performance of DMP, we organize DML using the LSTM model and compare the remaining useful life prediction performance of lithium-ion batteries between DMP and DML. We utilize the RMSE and RMSPE error measurement methods to evaluate the performance of DMP and DML models using test data. The results reveal that the RMSE difference between DMP and DML is 144.62 [Cycle], and the RMSPE difference is 3.37 [%]. These results indicate that the DMP model has a lower error rate than DML. Based on the results of our analysis, we have showcased the superior performance of DMP over DML. This demonstrates that in the field of lithium-ion batteries, the PNP model outperforms the LSTM model.

• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.165-171
• /
• 2004

Weight loss and nutrients dynamics during decomposition of oak roots (diameter classes: R₁〈0.2㎝, 0.5㎝〈R₂〈1㎝, 1㎝〈R₃〈2㎝, 2㎝.〈R₄〈4㎝) (Quercus acutissima) were studied for 33-months in Kongiu, Korea. After 33-months, decomposition rate of R₁, R₂, R₃ and R₄ was 49.6%, 47.5%, 66.4% and 66.1%, respectively. The decomposition constant(k) for R₁, R₂, R₃, and R₄ was 0.249/yr, 0.234/yr, 0.397/yr and 0.393/yr, respectively. Larger diameter class of the root lost more weight than smaller diameter class. N concentration in decomposing oak roots increased in all diameter classes. After 33-months, remaining N in R₁, R₂, R₃ and R₄ was 66.5%, 80.7%, 84.4% and 44.4%, respectively. K concentration in decomposing oak roots decreased in early part of decomposition and then increased in later stage of decomposition. After 33-months, remaining P in R₁, R₂, R₃ and R₄ was 64.7%, 62.4%, 93.1% and 30.7%, respectively. K concentration in decomposing oak roots decreased rapidly in early stage of decomposition. Remaining K in R₁, R₂, R₃ and R₄ was 11.6%, 10.6%, 5.9% and 7.7%, respectively. Ca concentration in decomposing oak roots showed different among diameter classes. After 33-months, remaining Ca in R₁, R₂, R₃ and R₄ was 66.2%, 51.0%, 39.1% and 48.3%, respectively. Initial concentration of Mg in oak root was higher in smaller diameter class. After 33-months, remaining Mg in R₁, R₂, R₃ and R₄ was 15.3%, 29.9%, 24.5% and 69.4%, respectively.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.579-587
• /
• 2008

Typically, the file sizes of JPEG compressed images with various complexity differ from images regardless of same image size. So, it is not easy to estimate the remaining image counts that should be stored in the limited storage equipped with the digital camera. To solve the problem, the bit rate control employs the modification of quantization table. The previous work assumed that there is linear relation between image activity and modification factor of quantization table, but in this paper, more accurate functional relations based on statistics are employed to improve the bit rate control accuracy. Computer simulations reveals that the standard deviation of the bit rate error of the proposed scheme is 50% less than that of the conventional method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.4
• /
• pp.327-335
• /
• 2004

This study investigates the safety assessment of the potential for fretting-wear damages caused by foreign object in operating nuclear power plants. To get the natural frequency, corresponding mode shape and participation factor, modal analyses are performed for the helical type tubes with various conditions. The wear rate of helical type tube caused by foreign object is calculated using the Archard formula and the remaining life of the tube is predicted, and discussed in this study is the effect of the vibration of the tube on the remaining life of the tube. In addition, addressed is the effect of the external pressure on the vibration and fretting-wear characteristics of the tube.