• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.219-221
• /
• 1996

A reluctance motor is a electric machine in which torque is produced by the tendency of its movable part to move to a position where the inductance of the excited winding is maximized. This means physical fact that the energy stored in the field tend to be minimized as the energy stored in the field is converted the mechanical work. In this paper, we have studied the characteristics of the electromagnetic energy conversion about SRM which have 6 stator and 4 rotor poles with 3 phase. In addition we design the fundamental model of SRM with requirements(e.g. power, speed) and simulate with PC-SRD.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.55-59
• /
• 1997

In general, Vector control of synchronous reluctance motor(SynRM) is performed under the assumptions that all the parameters are constant and magnetizing flux saturation and iron loss effect can be negligible. Under these assumptions, however, torque nonlinear characteristic can be a possible performance deterioration when precision torque control is needed and operating speed is high. This paper proposes the method, in the Synchronous Reluctance Motor (SynRM), which select appropriate stator d,q-axis currents that the influence of iron core loss on the developed torque can be minimized, and shows that the proposed method is comparable to the algorithm which compensates the iron core loss effect.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권5호
• /
• pp.283-294
• /
• 2004

This paper introduces the new Direct Torque Control(DTC) method based on the estimated torque in Switched Reluctance Motor(SRM) and applies the proposed DTC to SRM for the instantaneous torque ripple reduction. The nonlinear characteristics of SRM is considered in the calculation of the estimated torque and the theory is described in this paper. Current control is one of the kernel elements of torque controller and the performance of the current control should be high for this work. But the conventional PI current control has a weak point in SRM application because of motional EMF. Consequently, this paper makes up for the weakness of PI controller through present of new current controller, that is termed the non-interference current control. The ability of proposed torque and current controller is verified through simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.119-121
• /
• 2006

This paper deals with characteristic analysis of switched reluctance motor including permanent magnet. First, we calculated flux density of switched reluctance motor according to position. Second, analyzed normal force and horizontal force from flux density of machine according to position. Also, analysis result compares with data that is derived through a finite element analysis (FEA), and proved validity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.92-94
• /
• 2006

Single phase switched reluctance motor has a high speed capability, due to its very robust rotor, and requires only one electronic power switch in its control circuitry. The latter feature considerably reduces the cost of the drive system. But it involves starting problem and strongly torque ripple, which means that the motor is not suitable for application that require constant torque or speed. To solve torque ripple and region of these problem, this paper presents a single phase Switched Reluctance Motor model with a barrier rotor pole. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.56-58
• /
• 2003

The Synchronous inductance in Synchronous Reluctance Motor is an element that is proportional to torque. the exact value must be found for controlling and the performance development of motors. In this paper, the inductances that are obtained by the Finite Element Method and AC standstill Test are compared each other. When controlling the direct torque. the fast response characteristics has been carried out with the inductace by the AC stanstill Test. To test the proposal controller, A Synchronous Reluctance Motor has been designed and manufactured and the adequacy of the proposal control are confirmed thought simulations and experiments.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.89-95
• /
• 2015

This paper presents a current sensorless maximum torque control of a synchronous reluctance motor drive. Stator current and current angle vs. maximum torque are obtained using measured d-axis and q-axis inductances. Then, d and q-axis stator voltage references for current sensorless maximum torque control are calculated from stator voltage equations. The proposed method is verified by simulation results comparing with conventional method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.701-704
• /
• 2000

A SRG(Switched Reluctance Generator) has many advantages such as efficiency simple controllability low cost and robustness compared with outer machines. But the theories that have been adopted as SRG control methods up to the present are complicated. This paper proposes a simple control methods using PID which controls only a turn-off angle while making turn-on angle signals of SRG constant. controlling the voltage differences between the reference and the real value and calculating the proper turn-off angle of the load variations can implement to keep the output voltage constant. the control method suggested in this paper enhances the efficiency of this system and simplifies the hardware and software by using only the voltage and speed sensors. The proposed method is verified by experiment

• Journal of Power Electronics
• /
• 제1권1호
• /
• pp.19-25
• /
• 2001

A high speed, three phase, 12/8 pole, 225 kW switched reluctance motor (SRM) has been designed and analyzed. A circuital approach has been used to find the geometry, windings parameters and electromagnetic loading. Then, the 3D finite element method (FEM) has been used to calculate the static torque more accurately and optimize the design. The efficiency of the designed SRM is almost constant over wide range of speed and its phase current is less sensitive to the speed than that of an induction motor of the same rating. Recommendations for manufacturers and users are given.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권7호
• /
• pp.356-363
• /
• 2001

A SRG (Switched Reluctance Generator) has many advantages such as high efficiency, low cost, high-speed capability and robustness compared with other of machine. But the control methods that have been adopted for SRGs are complicated. This paper proposes a simple control method using the PID controller which only controls turn-off angles while keeping turn-on angles of SRG constant. In order to keep the output voltage constant, the turn-off angle for load variations is controlled by using linearity between the generated current and turn-off angle since the reference generated current can be led through the voltage errors between the reference and the actual voltage. The suggested control method enhances the robustness of this system and simplifies the hardware and software by using only the voltage and the speed sensors. The proposed method is verified by experiments.