• Journal of Information Display
• /
• 제9권1호
• /
• pp.14-19
• /
• 2008

We demonstrated the capillary force lithography (CFL) method for controlling the azimuthal anchoring energy of a liquid crystal (LC) alignment layer. When a thermoplastic polymer film is heated to over the glass transition temperature, the melted polymer is filled into the mold structure by the capillary action and the aspect ratio of the pattern is determined by the dewetting time of the CFL process. Here, the proposed method showed that the azimuthal anchoring energy of the LC alignment layer could be simply controlled by the surface relief patterns which were determined by the dewetting times during the CFL patterning.

• 복식문화연구
• /
• 제17권2호
• /
• pp.320-329
• /
• 2009

This research attempts to develop a method to relieve dysmenorrhea, which is an obstacle to many women's social activities, by designing a smartwear with built-in thermotherapy and TENS device. TENS therapy has the advantages of being controlled by patients and not depending on the use of drugs. The TENS device is designed as a stomach band so as to be unnoticeable to others when outer clothes are worn; the size was minimized and attached to underwear to facilitate use everywhere at any time. A current problem is the limitation of minimizing, but as battery technology is further developed, we can anticipate much smaller devices. The development of aforementioned smartwear function will increase women's choices in occupations and general improvement in quality of life.

• 한국분말재료학회지
• /
• 제3권1호
• /
• pp.42-48
• /
• 1996

To investigate the phase transformation behaviors of mechanically alloyed Nb-25 at%Al powders, the mixed Nb-25 at%Al powders were mechanically alloyed in SPEX 8000 Mixer/Mill. Mechanical alloying(MA) time was varied between 0.5 hour and 72 hours. The phase formation behaviors of these mechanically alloyed powders were examined using X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), and differential thermal analysis(DTA). Appreciable amorphization started from 6 hours of MA. The powders mechanically alloyed for 10 hours were in almost amorphous phase. DTA results showed that the powders mechanically alloyed for 12 hours had a strong exothermic peak about$600^{\circ}C$, whereas the powders mechanically alloyed for 6 hours had two exothermic peaks. The first peak was found to be due to the stress relief effect and the second one due to the formation of$Nb_{3}Al,Nb_{2}Al and Nb_{2}C$phases by crystallization.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.109-112
• /
• 2007

A new concept of the microlens array is fabricated using a birefringent layer on the concave microlens array. The stacked layers of liquid crystalline polymer (LCP) and the UV epoxy focus an incident light due to the surface relief structure. The ferroelectric liquid crystal layer was added to control the focusing intensity with a fast switching time.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권5호
• /
• pp.267-271
• /
• 2006

A polymeric waveguide-type wavelength filter based on a Bragg grating has been proposed and fabricated using the simple nanoimpring technique, for the first time to our knowledge. An ultraviolet transparent stamp with the single-mode waveguide pattern incorporating a surface-relief-type Bragg grating was specially designed selective dry-etching process. Using this stamp, the device fabrication was substantially involving just a single-step process of imprint followed by polymer spin-coating. The achieved maximum reflection was higher than 25 dB at the center wavelength of 1569 nm. And the 3-dB bandwidth was 0.8 nm for the device length of 1.5 cm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2631-2636
• /
• 2008

The most components and piping of the secondary side of domestic nuclear power plants were manufactured carbon-steel and low-alloy steel. Flow accelerated corrosion leads to wall thinning (metal loss) of carbon steel components and piping exposed to the flowing water or wet steam of high temperature, pressure, and velocity. The feedwater heaters of many nuclear power plants have recently experienced sever wall thinning damage, which increases as operating time progress. Several nuclear power plants in Korea have also experienced wall thinning damage in the shell wall around the impingement baffle. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the experimental results based on down-scaled experimental facility. The experiments were performed based on several types of impingement baffle plates which are installed in low pressure feedwater heater.

• 동굴
• /
• 제79호
• /
• pp.53-63
• /
• 2007

While cave being active it will can occur and to be big the preparation against a small accident steadily and only objection the bay it knows to draw up the scenario of virtuality against the actual structure which leads a rescue work practice must practice. It systematizes a cave structure commission wheat cave structure association from the world-wide each nation and it does a cave relief activity. To found the cave structure center even in Korea and executing the improvement of structure setup and equipment and simultaneously, it is prevention of accident and accident occurrence right time and appropriate and to dispose and it is important to go out. The cave structure center must establish and inside Korean cave academic society it must maintain it must be strengthened feed with the fact that it becomes the relationship with academic society and the other cave structure specific authorization and a public relation.

• 한국항해학회지
• /
• 제5권2호
• /
• pp.41-47
• /
• 1981

Many new radar techniques have appeared on the electronic scene in recent years, such as a variety of automatic computer processing. However, even with the advent of these sophisticated radar techniques, an old problem continues to plague all radars: the problem of transmission line losses. With the higher performance required today, the Waveguide testing and trouble-shooting techniques remain essentially unchanged in principle. This paper dealt with the rf pulse "Time-domain Reflectometry" to inspect radar wave-guide system and compared with the conventional methods. During the investigation, it was verified that the pulsed TDR for wave-guide is superior to the conventional methods; 1. Disassembling is not needed to locate the discontinity points and measure the reflections of trobled points. 2. The results of the data are more precise. 3. The condition of individual component is able to the photographed and recorded permanently. 4. Since rf pulse TDR is based on the well-known basic radar principle, such a test set requires the minimum of training to operate. With the level of transmission line problems, the prospect of increasing complexity of equipment, and no relief in sight, the benifits must be emphasizied to adopt such a testing procedure.procedure.

• The Journal of Korean Physical Therapy
• /
• 제15권1호
• /
• pp.9-25
• /
• 2003

The purpose of this study was to evaluate the effect of therapeutic ultrasound after muscle contusion injury by observed immunoreactivity of substance-P that plays an important role in pain transmission. Ultrasound irradiation(1MHz, 1W/$cm^{2}$ continuous mode, treatment time 5 min) was applied through water submersion technique to 1 limb daily by kept off 5cm from muscle belly of gastrocnemius. The result of this study were as follows. 1. The substance-P was expressed in lamina I and II of dorsal horn of spinal cord, also in lamina IV and around of central cannel of spinal cord. Experimental group was lower expressed than control group with the exception of 1 days. 2. The substance-P immunoreactivity was decreased for 5 days together in lumbar and sacral region of all groups, expecially experimental group was rapidly. These data suggest therapeutic ultrasound may stimulate pain relief by diminish of substance-P in dorsal horn of spinal cord.

• 한국식생활문화학회지
• /
• 제3권4호
• /
• pp.359-367
• /
• 1988

Historical review on Korean vegetables was performed to illustrate the important position of the vegetables in Korean food culture. It is assumed that the cultivation of vegetable crops had been begun along with crop production. Korean people placed great importance on quality of vegetables including flavor and texture. It was also confirmed that vegetables had been cultivated and preserved by scientific methods. They grew vegetables at their leisure and knew to utilize medicinal effects of vegetables. This review reveals Korean ancestor's wisdom to use vegetables as foods for the relief of the sufferers from famine at the time of spring food shortage or crop failures.