• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.65-79
• /
• 2006

The ATIS(Advance Traveler Information System), as one part of ITS, is a system aiming to disperse traffic volume on transportation networks by providing traffic information to transportation users on pre-trip and en-route trips. One of tools in ATIS is usage of VMS(Variable Message Signs). It provides to the drivers with direct information about state of processing direction. which is considered as the most effective method in ATIS. The purposes of providing VMS information are classified two categories. One is to provide simple information to drivers for their convenience. The other is to manage traffic demand to improve transportation network performance. However, for more effective and reliable VMS information, several strategies should be taken into account. The main VMS management strategy is "Traffic Diversion Strategy for minimum delay" when traffic congestion or incident are occurred. For effective operation. firstly. reasonable diversion traffic volume is determined by network traffic condition Secondly, it is necessary to make providing information strategy which reflects driver response behavior for controling diversion traffic volume. This paper focuses on the providing real-time route guidance information by VMS when congestion is occurred by the incidents. This sturdy estimates time-dependent system optimal diversion rate that inflects travel time and queue lengths using traffic flow simulation model on base Cellular Automata. In addition, route choice behavior models are developed using binary logit model for traffic information variable by traffic system controller. Finally, this study provides time-dependent VMS massage contents and degree of providing information in order to optimize the traffic flow.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.11-20
• /
• 2014

For Web-based applications in IoT environment, IETF CoRE WG has standardizing the CoAP. One of limitations of CoAP is that CoAP standard does not consider the mobility management of the CoAP sensor node. In this paper, we propose the mobility management protocol of CoAP sensor node by considering the characteristics of the constrained network. The proposed mobility management protocol supports for Web client to be transmitted the sensing data from CoAP node reliably while the CoAP sensor moves into different wireless networks. To do this, we designed the architecture with the separate IP address management of CoAP sensor node and presented the mobility management protocol, which includes the holding and binding mode, in order to provide the reliable transmission. Finally, the numerical analysis and simulation with NS2 tool have been done for the performance evaluation in terms of the handover latency and packet loss with comparing the proposed mobility management protocol with other the existing mobility management protocols. The performance result shows that the proposed mobility management can provide the transmission of sensing data without the packet loss comparing with the existing mobility management protocol reliably.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.34-45
• /
• 2013

Recently, world-wide research activities on new network architectures and protocols are being actively progressed. Furthermore, research activities on testbed and related technologies for supporting those activities are being actively performed. In domestic study, research on the OpenFlow protocol based future Internet testbed implementation and research on its virtualization for supporting independent research experiments are being performed at the same time. The network virtualization is a technology which maximizes the testbed utilization without interfering each other for the individual research when many researchers share the testbed. In this paper, we implemented a Enhanced FlowVisor by extending basic FlowVisor by adding QoS functions which are admission control and minimum bandwidth guarantee. On the testbed, we performed a real-time video streaming experiment for verifying the performance of the Enhnaced FlowVisor on the OpenFlow protocol based future internet testbed. The result shows that the Enhanced FlowVisor can provide reliable and stable QoS to the individual researches without disturbing each other traffic on virtualized networks of the future Internet testbed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.14-27
• /
• 2009

Collection of invaluable real-time traffic data becomes available under ubiquitous transportation sensor networks (UTSN). Various research efforts have been made to utilize such useful data for deriving more accurate and reliable traffic information. This study presented a novel concept of decentralized traffic information and method to process traffic data which are obtained from inter-vehicle communications under the UTSN. In addition, an experimental evaluation to investigate the feasibility of the proposed method using probe vehicle data. Predictive travel times were estimated and evaluated for the feasibility investigation. Technical issues were derived and discussed to fully implement the proposed system. The outcomes of this study would be used as a guideline in designing better next-generation traffic information systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.271-277
• /
• 2020

There are increasing cases of monitoring the structural response of structures using multiple sensors. However, owing to cost and management problems, limited sensors are installed in the structure. Thus, few structural responses are collected, which hinders analyzing the behavior of the structure. Therefore, a technique to predict responses at a location where sensors are not installed to a reliable level using limited sensors is necessary. In this study, a numerical study is conducted to predict the seismic response of low-rise buildings using limited information. It is assumed that the available response information is only the acceleration responses of the first and top floors. Using both information, the first natural frequency of the structure can be obtained. The acceleration information on the first floor is used as the ground motion information. To minimize the error on the acceleration history response of the top floor and the first natural frequency error of the target structure, the method for predicting the mass and stiffness information of a structure using the genetic algorithm is presented. However, the constraints are not considered. To determine the range of design variables that mean the search space, the parameter prediction method based on artificial neural networks is proposed. To verify the proposed method, a five-story structure is used as an example.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1371-1379
• /
• 2009

In this paper, we propose a new multi-path routing protocol to provide reliable and stable data transmission in MANET that is composed of high-mobility nodes. The new multi-path routing establishes the main route by the mechanism based on AODV, and then finds the backup route that node-disjoint from the main route by making add nodes in the main route not participate in it. The data transmission starts immediately after finding the main route. And the backup route search process is taking place while data is transmitted to reduce the transmission delay. When either of the main route or the backup route is broken, data is transmitted continuously through the other route and the broken route is recovered to node-disjoint route by the route maintenance process. The result of the simulation based on the Qualnet simulator shows that the backup route exists 62.5% of the time when the main route is broken. And proposed routing protocol improved the packet transmission rate by 2~3% and reduced the end-to-end delay by 10% compared with AODV and AODV-Local Repair.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.64-72
• /
• 2008

Researchers nowadays are trying to implement u-Healthcare (ubiquitous Healthcare) systems for real-time monitoring and analysis of patients' status through a low-cost and low-power wireless sensor network. u-Healthcare system has an aim to provide reliable and fast medical services for patients regardless of time and space by transmitting to doctors a large quantity of vital signs collected from sensor networks. Existing u-Healthcare systems can merely monitor patients' health status. However, it is not easy to derive physiologically meaningful results by analyzing rapidly vital signs through the existing u-Healthcare systems. We introduce a Grid computing technology for deriving the results by analyzing rapidly the vital signs collected from the sensor network. Since both sensor network and Grid computing use different protocols, a gateway is needed. In addition, we also need to construct a gateway which includes the functions such as an efficient management and control of the sensor network, real-time monitoring of the vital signs and communication services related to the Grid network for providing u-Healthcare services effectively. In this paper, to build an advanced u-Healthcare system by using these two technologies most efficiently, we design and present the results to implement a SensorGrid gateway which connects transparently the sensor network and the grid network.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.153-168
• /
• 2002

Since 1992, conventional fire fighting businesses have been converted into a metropolitan autonomous fire fighting system to be ready for a variety of disasters. However, the corresponding investment has been overlapped due to the non-integration of businesses to prevent any potential disasters, and a series of collaborative systems have been not functioning so well. In the meantime, our fire fighting sector has been trying to set up its own clean and faithful position by abolishing any inconvenient system or outsourcing private sectors, and expanded its work scope from conventional fire fighting even to rescue and emergency works. While focusing on handling disaster, the fire fighting sector has been widely trusted and reliable throughtout our nation. Moreover, our fire fighting sector has secured nation wide mobile organizations, technical personnel by field, special equipments and independent communication network. In addition, the fire fighting sector has knowledges, expertise and capabilities required for managing disasters, while in charge of almost every disaster management works including fire, explosion, collapse, disaster and flood. It becomes an organization for comprehensive disaster management under an absolute national trust, which is based on the system for prevention, preparation and countermeasure against a variety of disasters. Thus, our fire fighting sector must make many efforts and try to modernize conventional education and training. The ways to facilitate rescue and emergency works may include the nurture of technical fire fighting personnel along with modernized equipments, the reinforcement of rescue and emergency education, the facilitation of operating civil defense corps, the facilitation of operating volunteer fire fighting corps, the better arrangement of 119 briefing room for public healthcare in provincial offices, the sterilization of rescue instruments and equipments the better repair education for emergency rescue member, the establishment of regional emergency assistant system and the expansion of fire fighting personnel and equipments. In terms of reinforcing the functions and services of rescue 119 and emergency corps, we must review the following considerations: Building up security system along with operational expansion, building up a system for emergency medical treatment, building up a comprehensive information management system for rescue and emergency, constructing a provincial safety museum and so forth. For the ways to better the works of rescue 119 we can review the following considerations : Improving the education for fire fighting training corps under Jeju Provincial Fire and Disaster Management Department, providing rescue members with more opportunities for clinical practices, enhancing the morale of rescue members, installing a comprehensive briefing room for emergency rescue members, building up medical networks along with reasonable policies for information service, operating the consulting system for rescue 119 and so on. If these requirements are met, it is expected that the fire fighting departments in Jeju province can cope with every accident and disaster a little more rapidly and quickly in compliance with local needs, so that they can keep their own position as a public fire fighting organization which may be trusted by the public.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.137-142
• /
• 2016

A two-step open system(TOS) was proposed to relay between a healing platform and a repository of personal health documents. TOS was designed by taking into consideration the pubsub service based on large scale connections to monitor a provider's access/request process for health documents in real time. TOS, however, uses WebSocket as a communication protocol in case of pubsub. Given the operational environment of low quality wireless networks for mobile devices that are user terminals in a healing platform, there is a need to add a messaging protocol to support QoS as well as a transmission protocol. As a light messaging protocol optimized for mobile devices, MQTT defines reliable messaging QoS to consider a wireless network situation of low speed/low quality. This study designed an MQTT protocol-based message broker to support QoS in case of large scale connections and pubsub by taking into consideration mobile devices that are user terminals in a healing platform. After designing a model between TOS and MQTT message broker, the study implemented a prototype based on the proposed design and compared it with its counterparts from previous studies based on the performance indicators in a load-test with the MQTT client tool.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.28-38
• /
• 2009

In this study, a remote air quality monitoring system for underground spaces was developed by using NDIR-based CO$_2$ sensor. And the remote monitoring system based on wireless sensor networks was installed practically on the subway station platform. More than 6.5 million citizens commutate everyday by the Seoul subway transportation that is the most typical public transportation. They concern about air quality with increasing interest on public health or many workers in subway stations or underground shopping centers. Recently, the Korean Ministry of Environment has operated the air quality monitoring system in some subway stations for testing phase. However, it showed many defects which are large-scale, high-cost and maintenance of precision sensors imported from abroad. Therefore this research includes the reliability test and a theoretical study about the inexpensive commercialized CO$_2$ sensor for reliable measurement of air quality which changes rapidly by the surrounding environments. And then we develop the wireless sensor nodes and the gateway applied for remote air quality monitoring. In addition, web server program was realized to manage air quality in the subway platform. This result will be valuable for a basic research for air quality management in underground spaces for future study.