• International Journal of Reliability and Applications
• /
• 제6권1호
• /
• pp.13-29
• /
• 2005

This paper deals with the stochastic analysis of a three-states semi-Markov reliability model. Using both the maximum likelihood and Bayes procedures, the parameters included in this model are estimated. Next, assuming that the lifetime and repair time are generalized exponential random variables, the reliability function of this system is obtained. Then, the distribution of the first passage time of this system is discussed. Finally, some of the obtained results are compared with those available in the literature.

• 한국시뮬레이션학회논문지
• /
• 제27권1호
• /
• pp.25-32
• /
• 2018

본 논문은 모델 기반 내장형 소프트웨어의 자동 생성 코드에 대한 효율적인 신뢰성 시험 절차와 구체화된 동적 시험 방안에 대해서 제시하고 있다. 모델 정적/동적 시험 각각을 코드 정적/동적 시험 전에 수행함으로서 코드 신뢰성 시험 수행의 이점이 있음을 기술하였다. 또한, 모델과 코드의 신뢰성 시험 상관관계를 모델의 경우 Model Advisor와 Verification and Validation tool, 코드의 경우 Polyspace와 LDRA를 이용하여 살펴보고 제시한 절차대로 수행한 신뢰성 시험의 결과를 보여주고 있다.

• 산업경영시스템학회지
• /
• 제29권3호
• /
• pp.135-142
• /
• 2006

Engineers are always concerned with life cycle costs for making important economic decisions through engineering action like reliability of products. Decisions during the reliability growth development of products involve trade-offs between invested costs and its returns. In order to find minimal LCC containing the reliability improvement cost, production cost, repair and replacement costs, and holding cost of spare parts for failure items we suggest in this paper relationship between development cost and sustaining cost in values of growth parameter $\beta$ of AMSAA model. This model is applied to the reliability growth program based on AMSAA model during R&D phase, the warranty activities of items and the block replacement policy for maintenance of items in avionic equipment.

• International Journal of Reliability and Applications
• /
• 제14권1호
• /
• pp.27-39
• /
• 2013

In this article, a new model based on the Rayleigh distribution is introduced. This model is useful and practical in physics, reliability, and life testing. The statistical and reliability properties of this model are presented, including moments, the hazard rate, the reversed hazard rate, and mean residual life functions, among others. In addition, it is shown that the distributions of the new model are ordered regarding the strongest likelihood ratio ordering. Four estimating methods, namely, method of moment, maximum likelihood method, Bayes estimation, and uniformly minimum variance unbiased, are used to estimate the parameters of this model. Simulation is used to calculate the estimates and to study their properties. Finally, the appropriateness of this model for real data sets is shown by using the chi-square goodness of fit test and the Kolmogorov-Smirnov statistic.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.329-339
• /
• 2019

Assessment of failure probability, especially for a complex structure, requires a considerable number of calls to the numerical model. Reliability methods have been developed to decrease the computational time. In this approach, the original numerical model is replaced by a surrogate model which is usually explicit and much faster to evaluate. The current paper proposed an efficient reliability method based on Monte Carlo simulation (MCS) and multi-gene genetic programming (MGGP) as a robust variant of genetic programming (GP). GP has been applied in different fields; however, its application to structural reliability has not been tested. The current study investigated the performance of MGGP as a surrogate model in structural reliability problems and compares it with other surrogate models. An adaptive Metropolis algorithm is utilized to obtain the training data with which to build the MGGP model. The failure probability is estimated by combining MCS and MGGP. The efficiency and accuracy of the proposed method were investigated with the help of five numerical examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.475-481
• /
• 1993

The objective of this study is to develope the reliability prediction model for Float Rated Integrating Gyroscope( :FRIG) at maximum loading. The equation of motion for FRIG is firstly derived to set up the reliability prediction model. To analysis reliability or all parts of the gyro is not easy due to their complicated structure. Therefore the failure parts are chosen by Failure Mode Effective Analysis (:FMEA). F.E.M is utilized to calculate loads for the selseced rotating assembly and pivot / jewel. The technical reliability is calculated by applying reliability design theory with these results and the performance reliability is sought through distribution estimation with error test data. The bulk reliability of gyroscope is sought by applying the two results. The present prediction results are compared with the accumulation time in good agreement.

• Industrial Engineering and Management Systems
• /
• 제7권2호
• /
• pp.113-125
• /
• 2008

This paper presents a model for designing cellular manufacturing systems (CMS) by integrating system cost, machine reliability, and preventive maintenance (PM) planning. In a CMS, a part is processed using alternative process routes, each consisting of a sequence of visits to machines. Thus, a level of 'system reliability' is associated with the machines along the process route assigned to a part type. Assuming machine reliabilities to follow the Weibull distribution, the model assigns the machines to cells, and selects, for each part type, a process route which maximizes the overall system reliability and minimizes the total costs of manufacturing operations, machine underutilization, and inter-cell material handling. The model also incorporates a reliability based PM plan and an algorithm to implement the plan. The algorithm determines effective PM intervals for the CMS machines based on a group maintenance policy and thus minimizes the maintenance costs subject to acceptable machine reliability thresholds. The model is a large mixed integer linear program, and is solved using LINGO. The results point out that integrating PM in the CMS design improves the overall system reliability markedly, and reduces the total costs significantly.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.31-36
• /
• 2010

Collecting all failures during life cycle of vehicle is not easy way because its life cycle is normally over 10 years. Warranty period can help gathering failures data because most customers try to repair its failures during warranty period even though small failures. This warranty data, which means failures during warranty period, can be a good resource to predict initial reliability and permanence reliability. However uncertainty regarding reliability prediction remains because this data is censored. University of Wuppertal and major auto supplier developed the reliability prognosis model considering censored data and this model introduce to predict reliability estimate further "failure candidate". This paper predicts reliability of telecommunications system in vehicle using the model and describes data structure for reliability prediction.

• Journal of the Korean Data and Information Science Society
• /
• 제8권2호
• /
• pp.231-237
• /
• 1997

The Koziol-Green(KG) model has become an important topic in industrial life testing. In this paper we suggest MLE of the reliability function for the Weibull distribution under the KG model. Futhermore, we compare Kaplan-Meier estimator, Nelson estimator, Cheng & Chang estimator, and Ebrahimi estimator with proposed estimator for the reliability function under the KG model.

• Journal of the Korean Data and Information Science Society
• /
• 제23권4호
• /
• pp.815-823
• /
• 2012

In this paper reliability growth model in which the operating time between successive failure is a continuous random variable is proposed. This model is for Burr type XII distribution with two parameters which is discussed in two versions: the order statistics and non-homogeneous Poisson process. The two software reliability measures are obtained. The performance for two versions of the suggested model is tested on real data set by U-plot and Y-plot using Kolmogorov distance.