• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.830-840
• /
• 2015

The H-bridge inverter is the fundamental power cell of the cascaded distribution static synchronous compensator (DSTATCOM). Thus, cell reliability is important to the compensation performance and stability of the overall system. The concept of the power electronics building block (PEBB) is an ideal solution for the power cell design. In this paper, an H-bridge inverter-based “plug and play” HPEBB is introduced into the main circuit and the controller to improve the compensation performance and reliability of the device. The section that discusses the main circuit primarily emphasizes the design of electrical parameters, physical structure, and thermal dissipation. The section that presents the controller part focuses on the principle of complex programmable logic device -based universal controller This section also analyzes typical reliability and anti-interference issues. The function and reliability of HPEBB are verified by experiments that are conducted on an HPEBB test-bed and on a 10 kV/± 10 Mvar DSTATCOM industrial prototype.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.199-208
• /
• 1994

One of the main objectives of the study is to propose a practical but realistic limit state model considering combined effect of axial and bending load for reliability analysis and safety assessment of cable-stayed bridge under vehicle traffic loads. This paper is intended to propose a new approach for the evaluation of reserved load carrying capacity of cable-stayed bridge under vehicle traffic loads in terms of equivalent strength, which may be defined as a bridge strength corresponding to the reliability index of the bridge. This can be derived from an inverse process based on the concept of FOSM form of reliability index. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed reliability model and methods are applied to the safety assessment of Jindo Bridge which is one of major two cable-stayed bridges in Korea.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.55-68
• /
• 2007

Recently, all kind of 21C-typed electronic goods show the tendency of hightechnology and digital convergence rapidly. Also, failure mechanism which differs from original goods concept presents. Today, failure mechanism which differs from one that was happened by restricted harmful environment material before adapted the raw of environment material is changing the paradigm of reliability engineering. Thus, when applied the environment matter of original and secondary material at the electronic goods were removed, reliability assessment method and prediction stay into low level. This study suggests as solution to overcome these phenomenon. The study on the management method of environmental restriction substances which is recognized as important element in the reliability assessment about environment material of electronic goods and the study on reliability assessment method of PWB without environment material are progressed.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.59-78
• /
• 2009

Reliability analysis for a proposed limit state bridge design code is performed. In order to introduce reliability concept to design code, the proposed live load model is based on truck weight survey. Test data of domestic material strengths are collected to model statistical properties of member strengths. Sample RC and PSC girder sections are designed following the safety factor format of the proposed code and compared with the current design practice. Reliability indexes are calculated and examined for material and member resistance factor formats and sample calibrations of safety factors are presented. It is concluded that the proposed code provides reasonable level of reliability compared to the international design standards.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.135-144
• /
• 1995

Since structural systems may fail in any one of several failure modes, computation of system reliability is always difficult. A method using numerical quadrature for computing structural system reliability with either one or more than one failure mode is presented in this paper. Statistically correlated safety margin equations are transformed into a group of uncorrelated variables and the joint density function of these uncorrelated variables can be generated by using the Maximum Entropy Method. Structural system reliability is then obtained by integrating the joint density function with the transformed safety domain enclosed within a set of linear equations. The Gaussian numerical integration method is introduced in order to improve computational accuracy. This method can be used to evaluate structural system reliability for Gaussian or non-Gaussian variables with either linear or nonlinear safety boundaries. It is also valid for implicit safety margins such as computer programs. Both the theory and the examples show that this method is simple in concept and easy to implement.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.526-533
• /
• 1997

Reliability of fire protection systems is often discussed, written about, and even put into codes and standards. However, reliability is seldom considered for the fire protection system as a whole. Why does this happen and why should the designer consider the system as a whole\ulcorner Existing codes and standards incorporate the concept of reliability usually In the form of key component redundancy for some parts of a system. The "Fire Safety Concepts Tree" presented in the National Fire Protection Association Guide 550, Guide to the Fire Safety Concepts Tree, provides a starting point for considering the performance of a water based fire suppression system. Considering fire protection objectives for water based fire suppression systems, means of evaluating system reliability can be developed. This development requires identification of system components that are significant to the overall system reliability.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.7-18
• /
• 2005

Over the past twenty years, the maintenance system has been developed and its importance has been increased. For the effective maintenance of the urban transit, we have developed the maintenance system based on the concept of RCM(Reliability Centered Maintenance). RCM analysis is a systematic approach to developing a cost-effective maintenance strategy based on the various components's reliability of the system in question. It is performed according to process that includes the following steps; definition of function and functional failures of the systems, construction of RB D(Reliability Block Diagram), performance of FMEA(Failure Modes & Effects Analysis) and calculation of the reliability index. The final process of RCM is to determine appropriate failure maintenance strategies. This paper aims to define the procedure of maintenace based on the concept of RCM for urban transit. The key for a successful maintenance system is an automated scheduling to the maximum extent possible and timely executions. The developed system issues maintenance plan and repair request based on analyzed data and maintenance experience.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.239-246
• /
• 2000

이 논문은 중대사고가 발생하였을때 운전원에 의하여 사고관리 방안을 수행하는 경우 그 실현성(Feasibility)을, 평가하는데 사용할 수 있는 새로운 시간의존적 신뢰도 분석방법을 제시하였다. 이 방법은 성능요구 (Performance Requirement)와 성능성취 (Performance Achievement)의 상관관계의 개념을 이용하는 신뢰도물리(Reliability Physics)와 모든 시간의존적 사고경위를 도출하는 동적사건수목 생성방법에 기초하고있다. 신뢰도물리는 성능요구변수와 성능성취변수의 비교를 이용한 신뢰도분석방법인 반면 동적사건수목 생성방법은 바람직한 해를 얻을 때까지 모든 가능한 사고경위를 도출해 내는 방법이다. 이 방법론을 정전사고시 참조원전의 공동에 비상화재시스템을 이용하여 물을 공급하는 공동범람사고관리 방안에 적용시켰다. Latin Hypercube Sampling 방법은 성능요구변수의 불확실성을 평가하는데 사용되었다. 제시된 방법론은 사고시 필요한 운전원의 방안수행 성공가능성을 평가하는데 사용될 수 있을 뿐만 아니라 궁극적으로 사고관리 절차서 개발에 도움이 될 수 있음을 보여주었다.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.300-307
• /
• 2020

본 연구에서는 아직 수행되고 있지 않지만 향후 필요한 BRP(Bulletproof Reliability Program) 개념과 절차를 소개하고자 하였다. BRP 업무수행 체계는 다음과 같다. 먼저 국방부의 조정/통제 하에 기품원에서 연간 BRP 계획을 수립하고 시행을 주관한다. 다음으로 각 군 및 유관기관/부서의 의견을 수렴하여 BRP 대상 시료(Lot)를 선정하고 시험을 진행한다. 시험이 종료되면 종합된 결과를 각 군에 통보하며, 각 군에서는 후속조치를 수행한다. BRP 업무수행 절차는 매년 평가계획을 수립하는 사업(평가) 계획단계, 수립된 계획에 따라 일반검사, 기능시험, 운용시험 등을 수행하는 시험단계, 결과를 종합·분석하고 방탄물자의 성능 등을 감안하여 적정한 등급으로 판정하는 평가/분석단계, 그 결과에 따른 각 군의 후속조치 단계로 이루어져 있다. BRP 수행을 위한 제언은 다음과 같다. 첫째, 현재 일부 적체되는 시험물량과 개발 중인 워리어 플랫폼, 향후 발생할 BRP 물량을 적시에 시험하여 방탄물자의 적시 조달 및 장병의 안전성 향상, 국방예산의 절감을 위한 추가적인 시험장 건설이 필요하다. 둘째, 현재 사격시험만을 통한 방탄시험을 넘어 방탄물자의 신뢰성 평가방법을 개발하고 적용하는 것이 필요하다. 셋째, BRP가 장병의 안전성 보장 및 전투력 향상을 위한 필수적인 것임을 알리고 관련 업무의 시급성과 지원 필요성을 주요 관리자와 지휘관들에게 인식시키는 것이 필요하다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.113-127
• /
• 1996

In Human Reliability Analysis(HRA), the uncertainties involved in many factors that affect human reliability have to be represented as the quantitative forms. Conventional probability- based human reliability theory is used to evaluate the effect of those uncertainties but it is pointed out that the actual human reliability should be different from that of conventional one. Conventional HRA makes use of error rates, however, it is difficult to collect data enough to estimate these error rates, and the estimates of error rates are dependent only on engineering judgement. In this paper, the error possibility that is proposed by Onisawa is used to represent human reliability, and the error possibility is obtained by use of fuzzy reasoning that plays an important role to clarify the relation between human reliability and human error. Also, assuming these factors are connected to the top event through Fault Tree structure, the influence and correlation of these factors are measured by fuzzy operation. When a fuzzy operation is applied to Fault Tree Analysis, it is possible to simplify the operation applying the logic disjuction and logic conjuction to structure function, and the structure of human reliability can be represented as membership function of the top event. Also, on the basis of the the membership function, the characteristics of human reliability can be evaluated by use of the concept of pattern recognition.