• 한국통신학회논문지
• /
• 제32권3B호
• /
• pp.161-167
• /
• 2007

본 논문에서는 고속 하향 패킷 접속 (high-speed downlink packet access: HSDPA) 시스템에서 상대적으로 큰 IP / UDP / RTP 계층의 오버헤더 (over-header) 효과를 줄일 수 있는 frame-bundling (FB) 기술을 채용한 IP기반 음성 (voice over internet protocol: VoIP) 서비스의 용량을 평가한다. 또한, VoIP 서비스를 제공하기 위한 수정된 비례 평등 (proportional fair: PF) scheduler를 소개한다. 본 연구의 주요한 관점은 FB가 무선 접속 시스템에서 허용 지연 기반의 시스템 outage에 미치는 영향을 관찰하는 것이다. 시스템 레벨 시뮬레이션을 수행한 결과로 부터 FB를 채용한 VoIP 서비스의 성능이 시스템의 허용 지연에 매우 민감함을 보인다. 또한, WCDMA (release'99)에 의해 사용되는 회선 교환 (circuit switching: CS) 방식의 음성서비스와 비교할 때 HSDPA에서 VoIP 서비스를 제공하는 것이 매우 효율적임을 보인다.

• 한국운동역학회지
• /
• 제19권1호
• /
• pp.87-98
• /
• 2009

본 연구는 남자고등학생 숙련자와 비 숙련자의 던지기 동작을 역학적으로 비교 분석하기 위해 3차원 영상분석 및 지면반력분석을 수행하였다. 연구 결과 숙련자는 공 던지기 동작의 총 소요 시간이 비숙련자보다 짧게 나타났으며, 숙련자는 (1) 왼발 착지 시 신체중심의 수평속도 (2) 전 구간에서 전완 분절의 수평속도 (3) 착지 시 손 분절의 수평속도가 비숙련자보다 빠르게 나타난 반면, 비숙련자는 (1) 착지이후에 신체중심의 수평속도 (2) 왼발이 지면에 닿는 시점에서 손 분절의 수평속도가 숙련자보다 빠르게 나타났다. 전후경각도에서 숙련자는 전 구간에서 후경자세를 취하는 것으로 나타났으나, 비 숙련자는 릴리즈 전까지는 후경자세를 취하다 릴리즈 순간에서는 전경자세를 취한 형태에서 릴리즈를 하는 것으로 나타났다. 또한 숙련자는 공 던지기 동작에서 (1) 어깨각도 (2) 이지 후 오른발의 착지에서 팔꿈치 각도 (3) 최대수직지면반력 (4) 오른발의 착지 시 최대전후지면반력이 비숙련자보다 크게 나타났다. 이와 같은 결과에서 숙련자는 비숙련자보다 안정된 자세로 신체의 중심을 후방에 위치시키는 후경자세를 유지하고 신체의 중심이동을 부드럽게 전환하는 효과적인 던지기 동작이 이루어짐을 알 수 있다.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.60-65
• /
• 2004

Numerical simulations and experiments have been carried out to investigate the effect of fuel injection nozzles on the combustion and NOx formation processes in a medium-speed marine diesel engine. Spray visualization experiment was performed in the constant-volume high-pressure chamber to verify the numerical results on the spray characteristics such as spray angle and spray tip penetration. Time-resolved spray behaviors were captured by high-speed digital camera and analyzed to extract the information on the spray parameters. Spray and combustion phenomena were examined numerically using FIRE code. Wave breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation processes. Numerical results were verified with experimental data such as cylinder pressure, heat release rate and NOx emission. Finally, the effects of fuel injection nozzles on the engine performance were investigated numerically to find the optimum nozzle parameters such as fuel injection angle, nozzle hole diameter and number of nozzle holes. From this study, the optimum fuel injection nozzle (nozzle hole diameter, 0.32 mm, number of nozzle holes, 8 and fuel injection angle, $148^{\circ}$) was selected to reduce both the fuel consumption and NOx emission. The reason for this selection could be explained from the highest fuel-air mixing in the early phase of injection due to the longest spray tip penetration and the highest heat release rate after $19^{\circ}$ ATDC due to the increased injection duration.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.979-987
• /
• 2005

Numerical simulations were performed at atmospheric pressure in order to understand the effect of additives on flame speed, flame temperature, radical concentrations, $NO_x$ formation, and heat flux in freely propagating $CH_4-Air$ flames. The additives were both carbon dioxide and hydrogen chloride which had a combination of physical and chemical behavior on hydrocarbon flame. In the flame established with the same mole of methane and additive, hydrogen chloride significantly contributed toward the reduction of flame speed, flame temperature, $NO_x$ formation and heat flux by the chemical effect, whereas carbon dioxide mainly did so by the physical effect. The impact of hydrogen chloride on the decrease of the radical concentration was about $1.4\~3.0$ times as large as that of carbon dioxide. Hydrogen chloride had higher effect on the reduction of $EI_{NO}$ than carbon dioxide because of the chemical effect of hydrogen chloride. The reaction, $OH+HCl{\rightarrow}Cl+H_2O$, played an important role in the heat flux from flames added by hydrogen chloride instead of the reaction, $OH+H_2{\rightarrow}H+H_2O$ which was an important reaction in hydrocarbon flames.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.61-67
• /
• 2012

The in-wheel motor used in green car was designed and constructed for an electric direct-drive traction system. It is difficult to connect cooling water piping because the in-wheel motor is located within the wheel structure. In the air cooling structure for the in-wheel motor, a outer surface on the housing is provided with cooling grooves to increase the heat transfer area. In this study, we carried out the analysis on the fluid flow and thermal characteristics of the in-wheel motor under the effects of motor speed and heat generation. In order to check the problem of heat release, the analysis has been performed using conjugate heat transfer (conduction and convection). As a result, flow fields and temperature distribution inside the in-wheel motor were obtained for base speed condition (1250 rpm) and maximum speed condition (5000 rpm). Also, the thermo-flow characteristics analysis of in-wheel motor for vehicles was performed in consideration of ram air effect. Therefore, we checked the feasibility of the air cooling for the housing geometry having cooling grooves and investigated the cooling performance enhancement.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.23-32
• /
• 2002

Combustion and flame propagation characteristics of the liquid phase LPG injection (LPLI) engine were investigated in a single cylinder optical engine. Lean bum operation is needed to reduce thermal stress of exhaust manifold and engine knock in a heavy duty LPG engine. An LPLI system has advantages on lean operation. Optimized engine design parameters such as swirl, injection timing and piston geometry can improve lean bum performance with LPLI system. In this study, the effects of piston geometry along with injection timing and swirl ratio on flame propagation characteristics were investigated. A series of bottom-view flame images were taken from direct visualization using an W intensified high-speed CCD camera. Concepts of flame area speed, In addition to flame propagation patterns and thermodynamic heat release analysis, was introduced to analyze the flame propagation characteristics. The results show the correlation between the flame propagation characteristics, which is related to engine performance of lean region, and engine design parameters such as swirl ratio, piston geometry and injection timing. Stronger swirl resulted in foster flame propagation under open valve injection. The flame speed was significantly affected by injection timing under open valve injection conditions; supposedly due to the charge stratification. Piston geometry affected flame propagation through squish effects.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.662-668
• /
• 2006

The effects of fuel injection nozzle hole on the NOx emission and fuel oil consumption of medium speed diesel engine HYUNDAI HiMSEN 6H21/32 engine are investigated by engine performance simulation. The results of performance simulation are verified by experimental results of NOx omission fuel oil consumption, cylinder pressure, and heat release rate according to the variation of the number of fuel injection nozzle hole and engine load. The performance simulations are also carried out to optimize the fuel injection nozzle of 6H21/32 engine in respect to the NOx emission and fuel oil consumption. The engine performance measurements are performed to verify the results of performance simulation and to investigate the effects of fuel injection nozzle on engine performance. The results of measurement indicate that significant NOx reduction can be achieved with minimum deterioration in fuel oil consumption by optimizing the geometry of fuel injection nozzle on 6H21/32 engine.

• 한국통신학회논문지
• /
• 제35권1A호
• /
• pp.16-24
• /
• 2010

HSUPA(High Speed Uplink Packet Access)는 고속 스케줄링, HARQ, 짧은TTI등을 Node B에서 제공함으로써 HSDPA 에 대응되게 상향링크 쪽의 고속 데이터 전송률을 제공하는 WCDMA의 Rel 6 이동통신 기술이다. WCDMA 시스템의 RNC(Radio Network Controller)와 기지국인 Node B 간의 Iub 구간에서 혼잡을 검출하는 것은 사용자의 통신서비스 품질을 높이기 위해서 매우 중요하다. 이를 위해 TNL 혼잡 검출과 Node B의 링크 버퍼 관찰 방법을 제안하고 이를 통해 얻을 수 있는 패킷 수율에 대해 성능 분석을 하였다. 제안하는 방법을 통해 좁은 Iub 대역폭의 혼잡 검출은 패킷 수율 향상에 도움이 되는 것을 확인할 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.83-86
• /
• 2015

The Laminar lifted methane jet flames diluted with helium and nitrogen in co-flow air have been investigated experimentally. The chemiluminescence intensities of $OH^{\ast}$ and $CH_2O^{\ast}$ radicals and the radius of curvature for tri-brachial flame were measured using an intensified charge coupled device (ICCD) camera, monochromator and digital video camera. The product of $OH^{\ast}$ and $CH_2O^{\ast}$ is used as a excellent proxy of heat release rate. These methane jet flames could be lifted in buoyancy and jet dominated regimes despite the Schmidt number less than unity. Lifted flames were stabilized due to buoyancy induced convection in buoyancy-dominated regime. It was confirmed that increased $OH^{\ast}$ and $CH_2O^{\ast}$ concentration caused an increase of edge flame speed via enhanced chemical reaction in buoyancy dominated regime. In jet momentum dominated regime lifted flames were observed even for nozzle exit velocities much higher than stoichiometric laminar flame speed. An increase in radius of curvature in addition to the increased $OH^{\ast}$ and $CH_2O^{\ast}$ concentration stabilizes such lifted flames.

• 한국운동역학회지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2010

The purpose of the study was to analyze kinetic factors required to the three-point jump shot of the basketball games through 3-D analysis and ground reaction force(GRF) analysis. Six university male players participated in this study. The results of the study were showed that (1) resultant velocity in the center of mass(COM) was $0.84{\pm}0.27\;m/s$ since a player didn't shot a ball in the highest peak and shot ball at the moment of going up forward and vertical movement. Therefore, it is necessary to find a proper timing to shot a ball; (2) the angular velocity was largely increased in upper arm and fore arm out of the upper-limb segments and the hands had the largest angular velocity since the body is in a fixed situation and angular speed is rapidly increased by the wrist' snap with the rapid movement of upper arm and forearm at the time of release a ball; (3) it is judged that a player can shot a ball at the accurate and high release point when the player collects power vertically to the maximum by keeping GRF to the right and the rear in a proper way and by keeping the body's balance so that a large power may not be dispersed.