• 제목/요약/키워드: Release speed

검색결과 264건 처리시간 0.025초

Creeping bentgrass의 생육과 디봇피해 회복을 위한 질소의 유형별 효과 (Evaluating Various Nitrogen Sources for Divot Recovery on Creeping bentgrass)

  • 이상국
    • 아시안잔디학회지
    • /
    • 제26권2호
    • /
    • pp.135-139
    • /
    • 2012
  • Creeping bentgrass 는 골프장의 티나 퍼팅그린 그리고 경기장과 같이 집중관리가 요구되는 곳에 가장 많이 사용되는 잔디의 종류중 하나이다. 골프장에서 계속해서 발생하는 디봇과 같은 피해는 골프장을 관리하는데 있어서 가장 큰 장애요인중 하나이다. 디봇피해를 회복하기 위한 많은 연구결가가 선행 되었음에도 불구하고, 질소의 유형에 따른 디봇피해의 회복에 대해서는 그 연구결과가 제한적이다. 본 연구는 creeping bentgrass 에 발생한 디봇 피해에 대한 질소의 유형별 효과에 대해 알아보기 위해서 수행되었다. 11가지 질소가 creeping bentgrass 'Penncross' 에 시비되었다. 첫번째 시비처리 이전에 일정한 단위규격당 디봇피해가 만들어 졌으며 피해가 생긴 빈자리에 원토양이 채워졌다. 실험기간동안 잔디의 색과 질이 평가되었다. 질소의 분해속도에 따른 효과는 디봇피해를 회복시키거나 creeping bentgrass 생육에 대해 영향을 미치지는 않았다. 총 4번에 걸쳐 시비한 urea 처리구는 질소가 시비되지 않은 대조구와 비교했을때 디봇의 회복이나 creeping bentgrass 생육에 대해 차이가 나타나지 않았다. 디봇피해에 대한 회복과 creeping bentgrass 생육에 대해 polyon 제품군, 특히 polyon mini (41-0-0)가 가장 좋은 효과를 보여 주었다. 본 실험결과 입자의 지름이 작은 완효성질소가 입자의 지름이 큰 완효성질소나 속효성질소 보다 creeping bentgrass 에 발생한 디봇피해의 회복에 좋은 효과를 나타냈다.

수종의 불소 함유 수복재의 불소 유리 및 압축 강도에 관한 연구 (COMPARATIVE STUDY ON THE FLUORIDE RELEASE AND COMPRESSIVE STRENGTH OF SEVERAL F-CONTAINING RESTORATIVE MATERIALS)

  • 박지영;김종수;김승오
    • 대한소아치과학회지
    • /
    • 제35권3호
    • /
    • pp.469-476
    • /
    • 2008
  • 본 연구는 새로 개발된 레진 강화형 글래스 아이오노머인 $Ketac^{TM}$ N 100과 Fuji Fil LC의 개선된 점을 보기 위해 불소 유리량과 압축 강도를 Fuji II LC와 비교 평가해 보았다. 불소 유리량 측정을 위해 각 재료 별로 시편을 15개씩 제작하여 탈이온수에 보관하였고, 31일 동안 pH/ISE meter(750P, Istek, Korea)를 이용하여 불소 유리량을 측정하였다. 압축 강도 측정을 위해 각 재료별로 15개씩 시편을 제작하여 만능 경성 시험기(Kyung-sung Testing Machine Co., Korea)를 이용하여 시편이 파절된 시점의 최대 강도를 측정하였다. 연구 결과 얻은 결론은 다음과 같다. 1. 전반적인 불소 유리량은 Fuji Fil LC, Fuji II LC, $Ketac^{TM}$ N 100 순으로 높았다(p<0.05). 2. 압축 강도는 Fuji II LC와 $Ketac^{TM}$ N 100은 유의한 차이가 없었고(p>0.05), Fuji Fil LC는 두 재료보다 낮은 압축 강도 값을 보였다(p<0.05). 이상의 결과를 종합해보면 $Ketac^{TM}$ N 100은 대조군인 Fuji II LC와 비교 시 불소 유리량은 적었으나 압축 강도는 유사했고 Fuji Fil LC는 불소 유리량은 높았고 압축 강도는 낮았다. 이런 재료의 특성에 맞게 임상 적용을 하는 것이 중요할 것이다.

  • PDF

자동이탈식 비상침선표지 개발을 위한 개념설계 연구 (The Conceptual Design of Auto Releasing Emergency Wreck Marking Buoys)

  • 국승기;박혜리
    • 해양환경안전학회지
    • /
    • 제22권5호
    • /
    • pp.417-422
    • /
    • 2016
  • 항로표지란 해상교통의 안전을 도모하고 선박운항 능률을 향상시키기 위한 해양교통안전시설로 새로운 위험물(New Danger)은 측방표지, 방위표지, 고립장해표지 등을 이용하거나 비상침선표지(Emergency Wreck Marking Buoy)를 사용하여 적절하게 표시하여야 한다. 그러나, 침선표지의 경우 설치의 신속성, 정확성, 부표의 특성 등의 문제로 인해 실질적인 설치 운영상의 문제가 제기 되고 있으며, 선박침몰 사고의 경우 기상악화, 해역의 특성, 사고 위치의 확인이 어려워 신속한 신위험물표지(New Danger Mark) 설치가 어려운 실정이다. 이 연구는 항상 선박 상갑판에 부착된 해양안전설비 중 하나로 Maritime Buoyage System(MBS)에 근거한 자동이탈식 비상침선표지를 개발하였다. 자동이탈식 비상침선표지Auto Releasing Emergency Wreck Marking Buoy)는 총 3개의 세부기술(자동이탈, 자동릴체인, 자동구동등명기)로 구성되며, 선박 상갑판에 부착된 자동이탈식 비상침선표지가 선박의 좌초 전복 침몰 등 해양사고 발생 시 일정수압에 의해 자동으로 이탈(Auto Release) 후 자기 부상(Auto Buoyance)하여 사고 발생 지점에 신속하고 정확하게 설치된다. 이러한 자동이탈식 비상침선표지는 선박의 항해안전을 위협하는 장해물로부터 해당 해역에서의 2차 사고를 방지하고, 신속한 수색 및 구조가 이루어질 수 있도록 한다.

한국어 자음생성의 생리음성학적 특성 (Physiologic Phonetics for Korean Stop Production)

  • 홍기환;양윤수
    • 대한후두음성언어의학회지
    • /
    • 제17권2호
    • /
    • pp.89-97
    • /
    • 2006
  • The stop consonants in Korean are classified into three types according to the manner of articulation as unaspirated (UA), slightly aspirated (SA) and heavily aspirated (HA) stops. Both the UA and the HA types are always voiceless in any environment. Generally, the voice onset time (VOT) could be measured spectrographically from release of consonant burst to onset of following vowel. The VOT of the UA type is within 20 msec of the burst, and about 40-50 msec in the SA and 50-70 msec in the HA. There have been many efforts to clarify properties that differentiate these manner categories. Umeda, et $al^{1)}$ studied that the fundamental frequency at voice onset after both the UA and HA consonants was higher than that for the SA consonants, and the voice onset times were longest in the HA followed by the SA and UA. Han, et $al^{2)}$ reported in their speech synthesis and perception studies that the SA and UA stops differed primarily in terms of a gradual versus a relatively rapid intensity build-up of the following vowel after the stop release. Lee, et $al^{3)}$ measured both the intraoral and subglottal air pressure that the subglottal pressure was higher for the HA stop than for the other two stops. They also compared the dynamic pattern of the subglottal pressure slope for the three categories and found that the HA stop showed the most rapid increase in subglottal pressure in the time period immediately before the stop release. $Kagaya^{4)}$ reported fiberscopic and acoustic studies of the Korean stops. He mentioned that the UA type may be characterized by a completely adducted state of the vocal folds, stiffened vocal folds and the abrupt decreasing of the stiffness near the voice onset, while the HA type may be characterized by an extensively abducted state of the vocal folds and a heightened subglottal pressure. On the other hand, none of these positive gestures are observed for the SA type. Hong, et $al^{5)}$ studied electromyographic activity of the thyroarytenoid and posterior cricoarytenoid (PCA) muscles during stop production. He reported a marked and early activation of the PCA muscle associated with a steep reactivation of the thyroarytenoid muscle before voice onset in the production of the HA consonants. For the production of the UA consonants, little or no activation of the PCA muscle and earliest and most marked reactivation of the thyroarytenoid muscle were characteristic. For the SA consonants, he reported a more moderate activation of the PCA muscle than for the UA consonant, and the least and the latest reactivation of the thyroarytenoid muscle. Hong, et $al^{6)}$ studied the observation of the vibratory movements of vocal fold edges in terms of laryngeal gestures according to the different types of stop consonants. The movements of vocal fold edges were evaluated using high speed digital images. EGG signals and acoustic waveforms were also evaluated and related to the vibratory movements of vocal fold edges during stop production.

  • PDF

목표위치가 볼링투구동작에 미치는 영향 (The Effects of Target Position on the Bowling Motion)

  • 김민수;백진호;곽창수;이기청;박종철
    • 한국운동역학회지
    • /
    • 제19권1호
    • /
    • pp.67-75
    • /
    • 2009
  • 이 연구는 목표위치가 볼링투구동작에 미치는 영향을 분석하는데 그 목적이 있다. 이를 위해서 볼링경력이 4년이상의 여자 고교선수 4명을 대상으로 비디오카메라를 이용한 3차원영상을 통해 볼링투구동작을 분석하였다. 이 결과를 보면, 1번 핀을 처리할 때는 목표위치를 향하여 고관절회전각은 다운스윙에서 백스윙정점까지 크게 유지하고 있는 것을 알 수 있었다. 7번 핀을 처리할 때는 투구하는 오른쪽 어깨측에 대하여 7번 핀은 좌측에 위치하고 있기 때문에 연구대상자의 볼중심위치의 좌우이동이 가장 낮게 나타났고, 릴리즈구간에서 소요시간과 수평속도가 가장 높게 나타났다. 어깨기울기각은 백스윙정점에서 릴리즈구간으로 갈수록 크게 증가하였으며, 좌측방향으로 투구동작이 이루어지고 있기 때문에 어깨회전각이 작게 나타나는 것을 알 수 있었다. 10번 핀을 처리할 때는 릴리즈구간에서 어깨회전각과 동체뒤틀림각이 가장 크게 나타나는 것을 알 수 있었다. 따라서 목표위치는 볼링투구동작에 영향을 미친다고 할 수 있다.

치면열구전색제의 표면처리와 중합시간 증가에 따른 미반응 모노머 용리 평가 (MONOMER RELEASE FROM PIT AND FISSURE SEALANT FOLLOWING BY SURFACE TREATMENT AND CURING TIME)

  • 서현우
    • 대한소아치과학회지
    • /
    • 제34권1호
    • /
    • pp.122-129
    • /
    • 2007
  • 본 연구는 복합 레진의 중합률에 영향을 미치는 광조사 시간을 달리하여 치면열구전색제를 중합하였을 경우 이로부터 용리되는 미반응 모노머들을 확인하고 정량화하고자 하였다. 그리고 치면열구전색제 중합 후 표면에 나타나는 미반응 모노머 층을 다양한 방법으로 제거한 후 용리되는 미반응 모노머들을 정량분석함으로써 미반응 모노머의 제거효과를 비교평가하고자 하였다. 광중합 시간에 따라 각각 20초, 40초, 60초간 중합한 후, 중합시간 별로 어떠한 처리도 시행하지 않은 군을 대조군, 증류수로 10초간 세척한 군을 I군(Group I), 75% 알콜에 젖은 면구로 10초간 문지른 군을 II군(Group II), 퍼미스와 러버컵을 이용하여 10초간 처리하고 증류수로 가볍게 세척한 군을 III군(Group III)으로 분류하였다. 표면처리 후 각 시편을 3차 증류수에 넣고 $37^{\circ}C$ 항온 수조에서 10분간 보관한 후 각각의 용리액을 고성능 액체 크로마토그래피를 이용하여 정성 및 정량 분석을 시행하였고 다음과 같은 결과를 얻었다. 1. 모든 대조군과 실험군에서 TEGDMA를 제외한 어떠한 모노머들도 검출되지 않았다. 2. 최소 중합시간, 권장 중합시간, 권장 중합시간 이상의 순으로 중합시간이 증가할수록 TEGDMA의 용리량은 감소하였다. 3. 표면처리를 한 군들은 대조군에 비하여 TEGDMA의 용리량이 유의할 만하게 감소하였다. 4. 표면처리를 한 군 가운데 퍼미스와 러버컵을 이용한 경우 잔존 모노머의 제거 효과가 다른 군에 비하여 유의성 있게 높았다. 5. 권장 중합시간 이상인 60초 중합 후, 퍼미스와 러버컵을 이용하여 표면처리한 경우 가장 적은 양의 모노머 용리량을 보였다.

  • PDF

양궁 백 텐션 국면에서 최우수 양궁선수의 동작특성 평가 (Evaluation on Motion Features of the World's Second Archer during Back-Tension in Archery)

  • 이재훈;하종규;류지선;김기찬
    • 한국운동역학회지
    • /
    • 제17권3호
    • /
    • pp.197-207
    • /
    • 2007
  • It has been reported that Back-Tension played a significant role in archery (Lee & Bondit, 2005; Kim, 2007) but there are a few researches related Back-Tension in Korea recently. Therefore, the purpose of this study was to investigate archery back tension technique for the second ranked archer in the World and to find ways to improve performance. A subject(height: 185cm, mass: 82kg, years: 21yrs, careers: 12yrs) who is a number of national team and the second ranked archer in the World authorized by FITA (Federation Internationale de Trial Arc) was perticipated in this experiment. When shooting 60 shots($12{\times}5$), shooting motions were recorded with 7 infrared cameras and 2 ultrahigh-speed cameras. A QTM and an Auto Track were used to acquire raw data. The sampling rates of both cameras were 200 Hz. and 1000 Hz. respectively and data were filtered using a fourth order Butterworth low pass filtering with a cutoff-frequency of 30Hz. The parameters were calculated with Matlab6.5 and analyzed with SPSS11.0. After Pearson's correlations between 8 parameters were analyzed, 5 parameters from 13parameters that affected records were analyzed with multiple regression analysis (Enter order: x1, x2, x3, x4, x5). The results were as follows: 1. Comparing between parameters according to scores, the patterns of horizontal and vertical angular velocity(av.) of scapular relative angle was different between 8 score and 9 or 10 scores. 2. The correlations of parameters that affected records were a horizontal av.(x1, p=.032<.05) and a vertical av.(x3, p=.033<.05) of scapular from release to delivery in KB back-tension (anchoring-delivery). 3. The decision coefficients(R2) of above two parameters and three parameters selected by experts that may affect record, that is, an absolute trunk angle(x4) from in KKC back-tension (anchoring-release) and a horizontal relative scapular angle(x2) and an absolute trunk angle(x5) from release to delivery in KB back-tension were 7.7%(x1), 0.1%(x2), 8.5%(x3), 0.7%(x4) and 0.9%(x5) in sequence. 4. The multiple regression equation was a y= -1.16E-2 x1 + 0.109 x2 + 3.437E-2 x3 + 6.139E-2 x4 + 0.117 x5 + 3.420 In conclusion, a total contribution was low, that is, R2(17.9%) suggested that on the one hand, Lim's motion may not depend on a certain factor because his postural factors affected shooting motion are some stable on the other hand, unknown factors may exist(e.g. psychological, physiological factors etc.). Further study of EMG patterns of muscles and anatomic consideration related to shoulder girdle and scapular bones may help to identify mechanism of Back-Tension.

자동차용 연료전지 시스템의 가습모델과 열/물균형 유지방법 (Humidification model and heat/water balancing method of PEMFC system for automotive applications)

  • 정승훈;윤석호;김민수
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.339-344
    • /
    • 2005
  • A PEMFC system model for FCEV was constructed and simulated numerically to examine the heat/water flow of the system and air/fuel humidification process for various operation conditions (ambient pressure /temperature/humidity, operating temperature, power load). We modeled PEMFC stack which can generate maximum electricity of about 80 kW. This stack consists of 400 unit cells and each unit cell has $250cm^2$ reacting area. Uniform current density and uniform operating voltage per each cell was assumed. The results show the flow characteristics of heat and water at each component of PEMFC system in macro-scale. The capacity shortage of the radiator occurred when the ambient was hot $(over\;40^{\circ}C)$ and power level was high (over 50 kW). In spite of some heat release by evaporation of water in stack, heat unbalance reached to 20kW approximately in such a severe operating condition. This heat unbalance could be recovered by auxiliary radiators or high speed cooling fan with additional cost. In cold environment, the capacity of radiator exceeded the net heat generation to be released, which may cause a problem to drop the operating temperature of stack. We dealt with this problem by regulating mass flow rate of coolant and radiator fan speed. Finally, water balance was not easily broken when we retrieved condensed and/or unused water.

  • PDF

대학 골프 선수의 Pitching wedge 스윙동작의 운동학적 특성 분석 (Kinematical Analysis of Pitching wedge swing motion in University Golfer)

  • 백진호;윤동섭;김재필
    • 한국운동역학회지
    • /
    • 제13권3호
    • /
    • pp.133-149
    • /
    • 2003
  • The purposes of present study were to determine the major check-points of golf swing from the review of previous studies, and to suggest additional information on the teaching theory of golf. The golf swing motion of 6 male and female elite university golf players were filmed with 16mm Locam II high speed cameras at the speed of 200f/s, and variables such as time, displacement, angle, velocity were calculated and analyzed by 3D Cinematography using DLT method. The results were: 1. Differences were shown in the ratio of weight distribution on the feet, cocking angle, take-back velocity, club-head velocity at impact depending upon the physical characteristics and club used for swing. 2. Time for the down-swing and impact were $0.27{\sim}0.29s$ in men and $0.29{\sim}0.32s$ in women, which was 1/3 of the time for the back-swing. Women showed longer total swing time than men because of longer time in back-swing, follow-through and finish. 3. Men showed larger range of motion in shoulder and knee joints than women, on the other hand women showed larger range of motion in hip joint than men. 4. Cocking motion and right elbow flexion were occurred at the top of back-swing and cocking release was occurred at the moment of impact. Maximum rotations of shoulder and hip joints were found between the top of back-swing and down-swing phase. 5. Women showed lower back-swing velocity than men, and men showed higher club velocity(men: $38.2{\sim}38.6m/s$, women: $35.1{\sim}36.4m/s$) than women.

기능성 오일을 함유하는 폴리우레탄 마이크로캡슐의 제조 및 분석 (Preparation and Characterization of Polyurethane Microcapsules Containing Functional Oil)

  • 김인회;서재범;김영준
    • 폴리머
    • /
    • 제26권3호
    • /
    • pp.400-409
    • /
    • 2002
  • 기능성 오일 (citronella oil)을 함유하는 폴리우레탄 마이크로 캡슐을 계면중합을 이용하여 tolulene 2,4-diisocyanate (TDI)와 ethylene glycol (EG)로부터 제조하였으며 제조된 마이크로캡슐을 적외선분광분석, 자외선분광분석, 입도분석기, 열중량측정기, 주사전자현미경을 이용하여 분석하였다. 마이크로캡슐의 제조시 이용된 분산제의 농도 및 교반속도와 같은 변수가 제조된 마이크로캡슐의 입자크기 및 분포에 미치는 영향을 조사하였다. 또한, 적외선분광분석을 통해 citronella 오일이 성공적으로 캡슐화되었음을 알 수 있었고 열중량측정으로 마이크로캡슐은 약 $220^{\circ}C$ 정도까지 안정함을 알 수 있었다. 마이크로캡슐을 메탄올 용매에 넣어 캡슐 속의 citronella 오일의 방출거동을 자외선분광분석을 통해 조사하였다. Citronella 오일의 방출양은 캡슐 제조 시 적용된 교반속도 및 분산제의 농도를 증가시킴에 따라 증가하였다. Citronella 오일을 함유하는 마이크로캡슐은 우수한 방충효과를 나타내었다.