• Parasites, Hosts and Diseases
• /
• v.52 no.3
• /
• pp.317-319
• /
• 2014

The oocyst wall is severed by means of mechanical injury or chemical agents. This study reports the percentage of in vitro sporocyst release following mechanical shaking in the presence of varying sizes of glass beads. Glass beads measured 0.5, 1, and 3 mm in diameter and were shaken with the oocysts for different times ranging from 5 sec to 5 min. Approximately 80% of sporocysts were released with 5 min of shaking in the presence of 3 mm glass beads, as well as 30 sec with 0.5 mm beads and 1 mm glass beads. The release of sporocysts of E. tenella was most efficient using 1 mm glass beads and treatment times of 30 sec to 1 min. Therefore, the use of 1 mm glass beads with 30 sec to 1 min of agitation is recommended in order to maximize sporocyst release and recovery and to improve the yield of viable sporozoites for use in biochemical, tissue culture, and immunological applications of coccidia.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.218-225
• /
• 2009

This paper considers a parallel-machine scheduling problem with job release times and sequence-dependent setup times. The objective of this problem is to determine the allocation policy of jobs and the scheduling policy of machines so as to minimize the weighted sum of setup times, delay times, and tardy times. A mathematical model for optimal solution is derived and a meta heuristic algorithm based on the improved ant colony system is proposed in this paper. The performance of the meta heuristic algorithm is evaluated through compare with optimal solutions using randomly generated several examples.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.932-939
• /
• 2002

The aim of the present study was to determine the characteristics of cytisine on the secretion of catecholamines (CA) in isolated perfused rat adrenal glands, and to clarify its mechanism of action. The release of CA evoked by the continuous infusion of cytisine ($1.5{\times}10^{-5} M$) was time-dependently reduced from 15 min following the initiation of cytisine infusion. Furthermore, upon the repeated injection of cytisine ($5{\times}10^{-5}$), at 30 min intervals into an adrenal vein, the secretion of CA was rapidly decreased following the second injection. Tachyphylaxis to the release of CA was observed by the repeated administration of cytisine. The cytisine-induced secretion of CA was markedly inhibited by pretreatment with chlorisondamine, nicardipine, TMB-8, and the perfusion of $Ca^{2+}$-free Krebs solution, while it was not affected by pirenzepine or diphenhydramine. Moreover, the secretion of CA evoked by ACh was time-dependently inhibited by the prior perfusion of cytisine ($5{\times}10^{-6} M$). Taken together, these experimental data suggest that cytisine causes secretion of catecholamines from the perfused rat adrenal glands in a calcium-dependent fashion through the activation of neuronal nicotinic ACh receptors located in adrenomedullary chromaffin cells. It also seems that the cytisine-evoked release of catecholamine is not relevant to the activation of cholinergic M$_1$-muscarinic or histaminergic receptors.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.939-954
• /
• 1995

We propose a policy for controlling the release of raw wafers into the semiconductor wafer fabrication lines. The proposed policy exploits up-to-date factory floor information gathered by tracking systems used to calculate the time and amount of a new release to minimize mean flow times and mean tardiness while maintaining the maximum output rates of the system. Extensive computer experiments show that the proposed policy results in significant improvements for the same output rates compared to existing release rules.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.161-169
• /
• 2023

In this study, we prepared naproxen (NP) imprinted biodegradable polymer based multi-layer biomaterials using allbanggae starch (ABS), polyvinyl alcohol (PVA), and alginic acid (SA), and investigated their physicochemical properties and the controlled drug release effects. In addition, the prepared multi-layer biomaterials were characterized by FE-SEM and FT-IR. In order to confirm the controlled drug release effect for the transdermal drug delivery system (TDDS), the NP release properties of NP imprinted multi-layer biomaterials were investigated using various pH buffer solutions and artificial skin at 36.5 ℃. The results of NP release in various pH buffer solutions indicated that the NP release at high pH was about 1.3 times faster than that at low pH. In addition, NP release in multi-layer biomaterials was about 4.0 times slower than that in single-layer biomaterials. It was confirmed that the NP release rate in triple-layer biomaterials was 4.0 times slower than that in single-layer biomaterials while using artificial skin. Also, it could be found that NP in double-layer biomaterials and triple-layer biomaterials was released sustainably for 12 h. The NP release mechanism in pH buffer solutions followed the Fickian diffusion mechanism, but followed the non-Fickian diffusion mechanism with artificial skin.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.177-186
• /
• 2021

Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2977-2983
• /
• 2023

During normal operation, some parts of the fission product in the defective fuel rods can release into the primary loops in PWR and the escape rate coefficients are widely used to assess quantitatively the release behaviors of fission products in the industry. The escape rate coefficients have been standardized and have been validated by some drilling experiments before the 1970s. In the paper, the model to determine the escape rate coefficients of fission products has been established and the typical escape rate coefficients of noble gas and iodine have been deduced based on the measured radiochemical data in one operating PWR. The result shows that the apparent escape rate coefficients vary with the release-to-birth and decay constants for different fission products of the same element. In addition, it is found that the escape rate coefficients from the defective rod with large defects are much higher than the standard escape rate coefficients, i.e., averagely 4.4 times and 1.8 times for noble gas and iodine respectively. The enhanced release of fission products from the severe secondary hydriding of several defective fuel rods in one cycle may lead to the potential risk of the temporary shutdown of the operating reactors.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.2
• /
• pp.158-168
• /
• 2001

We present a tabu search (TS) algorithm to minimize maximum lateness on a single machine in the presence of sequence dependent setup times and dynamic job arrivals. The TS algorithm starts with a feasible schedule generated by a modified ATCS (Apparent Tardiness Cost with Setups) rule, then through a series of search steps it improves the initial schedule. Results of extensive computational experiments show that the TS algorithm significantly outperforms a well-known RHP heuristic by Ovacik and Uzsoy, both on the solutions quality and the computation time. The performance advantage is particularly pronounced when there is high competition among jobs for machine capacity.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.4
• /
• pp.261-266
• /
• 2004

In this paper, the software reliability growth model which incorporates the periodic maintenance after the release is proposed. Using the proposed model, the debugging and periodic maintenance cost subject to the required level of the software reliability are investigated. An optimal software release time is derived for a fixed interval of periodic maintenance. To validate the proposed model, release times obtained in this study are compared with examples. The proposed investigation is expected to be served as one of factors in determining the release time of the software where periodic maintenance is considered.

• Ocean and Polar Research
• /
• v.38 no.1
• /
• pp.47-57
• /
• 2016

Effects of environmental factors on the zoospore release and germling growth of Chaetomorpha linum were examined. Zoospore release and germling growth experiments were carried out under a combination of temperatures ${\times}$ irradiances, and a single factor of irradiances, salinities, daylength and nutrients (nitrogen, phosphorus). Zoospore release was maximal under condition of $20^{\circ}C{\times}100{\mu}mol\;photons\;m^{-2}s^{-1}$ in a factorial experiment (temperatures ${\times}$ irradiances), at $100{\mu}mol\;photons\;m^{-2}s^{-1}$ in irradiance experiment and at 34 psu in salinity conditions. After 24 days in culture, germling growth was maximal at $25^{\circ}C{\times}100{\mu}mol\;photons\;m^{-2}s^{-1}$ in temperatures ${\times}$ irradiances and at normal seawater (34 psu) in salinity. Germling growth is faster at higher irradiance under same temperature condition and it increased with increasing daylengths (8-16 h). Chaetomorpha linum grew in wide range of N and P concentrations. The growth of germling was maximal at $50{\mu}M\;{PO_4}^{3-}$ and $40{\mu}M\;{NH_4}^+$. Germling growth was more effective under nitrogen addition than phosphorus addition in culture. In conclusion, optimal environmental conditions for zoospore release were $20^{\circ}C$, $100{\mu}mol\;photons\;m^{-2}s^{-1}$, and 34 psu. In addition, the optimal germling growth was observed at $25^{\circ}C$, $100{\mu}mol\;photons\;m^{-2}s^{-1}$, 34 psu, 16 h, $50{\mu}M\;({PO_4}^{3-})$ and $40{\mu}M\;{(NH_4}^+)$.