• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2616-2635
• /
• 2013

In this paper, we propose an iterative transceiver design in a multi-relay multi-user multiple-input multiple-output (MIMO) system. The design criterion is to minimize sum mean squared error (SMSE) under relay sum power constraint (RSPC) where only local channel state information (CSI)s are available at relays. Local CSI at a relay is defined as the CSI of the channel between BS and the relay in the $1^{st}$ hop link, and the CSI of the channel between the relay and all users in the $2^{nd}$ hop link. Exploiting BS transmitter structure which is concatenated with block diagonalization (BD) precoder, each relay's precoder can be determined using local CSI at the relay. The proposed scheme is based on sequential iteration of two stages; stage 1 determines BS transmitter and relay precoders jointly with SMSE duality, and stage 2 determines user receivers. We verify that the proposed scheme outperforms simple amplify-and-forward (SAF), minimum mean squared error (MMSE) relay, and an existing good scheme of [13] in terms of both SMSE and sum-rate performances.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.1
• /
• pp.26-32
• /
• 2004

Digital technology has advanced significantly over the years both in terms of software tools and hardware availability. It is now applied extensively throughout many area of electrical engineering including protective relaying in power systems. Digital relays have numerous advantages over traditional analog relays, such as the ability to accomplish what is difficult or impossible using analog relays. Although non real-time simulators like PSCAD/EMTDC are employed to test the algorithms, such simulations are disadvantaged in that they cannot test the relay dynamically. Hence, real-time simulators like RTDS are used. However, the latter requires large space and is very expensive. This paper uses EMTP MODELS to simulate the power system and the distance relay. The distance relay algorithm is implemented and the distance relay is interfaced with a test power system. The distance relay's performance is then assessed interactively under various fault types, fault distances and fault inception angles. The test results show that we can simulate the distance relay effectively and we can examine the operation of the distance relay very closely including its drawbacks/limitations by using EMTP MODELS. Equally important, this approach facilitates any changes that need to be carried out in order to enhance the Distance Relay under test/examination.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.13-19
• /
• 2008

In this paper, the new cooperative communication techniques is proposed for multi-input multi-output(MIMO)-orthogonal frequency division multiplexing (OFDM) system using the relay with multiple antenna. As the MIMO channel is formed by space time coding at the MS(mobile station)-RS(relay station) and RS-BS(base station), we can get the cooperative diversity and MIMO diversity gain simultaneously. Therefore, the performance of MIMO-OFDM system using the relay with multiple-antennas is very improved. And the simple power allocation technique is Proposed for the transmitting power of the mobile station and the relay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.54-56
• /
• 2013

A subcarrier allocation scheme for base station (BS), relay station (RS) and mobile station (MS) can affect the performance of orthogonal frequency division multiple access (OFDMA) relay systems. In this paper, we propose a subcarrier allocation scheme with inter-cell interference and network coding in OFDMA relay systems. In the network coding zone, we consider an environment where RS can transmit a frame to BS and MS simultaneously. We divide an OFDMA frame into downlink zone, uplink zone, and network coding zone. The proposed scheme allocates subcarriers to BS, RS, and MS for each zone with consideration of inter-cell interference in OFDMA relay systems. We evaluate the performance of the proposed subcarrier allocation scheme through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.584-591
• /
• 2010

In this paper, we propose an adaptive Relay Station (RS) coverage extension scheme for the Mobile Multi-hop Relay (MMR) systems. The MMR system with a non-transparent mode RS can be used to extend BS coverage using the remaining capacity of the Base Station(BS). Thus, the call blocking may occur in RSs when calls arrive very often in Multi-hop Relay Base Station (MR-BS). In the proposed scheme, RSs can be connected to the neighbor MMR system as the 2ndtier RSs if the neighbor MMR system services low traffic load when calls are frequently arrived in MR-BS or RSs. By doing so, the MMR system can accept a new call without call blocking. Through numerical results, we demonstrate that the proposed scheme outperforms the conventional MMR system in terms of the throughput and call blocking probability of MMR systems.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.2
• /
• pp.29-37
• /
• 2020

This paper proposes a multiple-relay-assisted single side band (SSB) space frequency block code (SFBC) single carrier (SC)-frequency division multiple access (FDMA) system and measures the performance of SSB SFBC SC-FDMA transmission system with the signal-to-noise power ratio SNR) between relays and a destination station. As we know, the performance of relay-assisted transmission systems can be easily improved by re-transmitting to the destination station after applying block code to the recovered transmitted signals of relays. In this paper, the performance improvement of the relay-assisted SSB SC-FDMA system can be obtained without any significant increase of system computational complexity by implementing block code with the complex conjugates symmetric characteristic of SSB system. The simulation result shows that the SNR performance of the proposed multiple-relay-assisted SSB SFBC SC-FDMA system is about 4 dB better than the performance of the single-relay-assisted SSB SC-FDMA system at the symbol error rate of 10^-2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5343-5364
• /
• 2016

Considering the tradeoff between energy consumption and outage behavior in buffer-aided relay selection, a novel energy-efficient buffer-aided optimal relay selection scheme with power adaptation and Inter-Relay Interference (IRI) cancellation is proposed. In the proposed scheme, energy consumption minimization is the objective with the consideration of relay buffer state, outage probability and relay power control, in order to eliminate IRI. The proposed scheme selects a pair of optimal relays from multiple candidate relays, denoted as optimal receive relay and optimal transmit relay respectively. Source-relay and relay-destination communications can be performed within a time-slot, which performs as Full-Duplex (FD) relaying. Markov chain model is applied to analyze the evolution of relay buffer states. System steady state outage probability and achievable diversity order are derived respectively. In addition, packet transmission delay and power reduction performance are investigated with a specific analysis. Numerical results show that the proposed scheme outperforms other relay selection schemes in terms of outage behavior with power adaptation and IRI cancellation in the same relay number and buffer size scenario. Compared with Buffer State relay selection method, the proposed scheme reduces transmission delay significantly with the same amount of relays. Average transmit power reduction can be implemented to relays with the increasing of relay number and buffer size, which realizes the tradeoff between energy-efficiency, outage behavior and delay performance in green cooperative communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.196-205
• /
• 2012

In this paper, we investigate MSAP-TMFT in TICN systems that will be future NCW-based tactical networks. Although MSAP-TMFT implements the WiBro technology, we propose to design a NRC(NAT Relay Cell) that functions as a relay station and at the same time as a base station in combat environments. NRCs support extension of communication distance, increased data rate, efficient radio resource management, and survavibility of combat networks. From simulation results, we show that NRCs improve the efficacy of radio resource management and system throughput compared to the legacy systems.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.261-269
• /
• 2016

In this paper, the impact of energy constraints on a two-hop network with a source, a relay and a destination under random medium access is studied. A collision channel with erasures is considered, and the source and the relay nodes have energy harvesting capabilities and an unlimited battery to store the harvested energy. Additionally, the source and the relay node have external traffic arrivals and the relay forwards a fraction of the source node's traffic to the destination; the cooperation is performed at the network level. An inner and an outer bound of the stability region for a given transmission probability vector are obtained. Then, the closure of the inner and the outer bound is obtained separately and they turn out to be identical. This work is not only a step in connecting information theory and networking, by studying the maximum stable throughput region metric but also it taps the relatively unexplored and important domain of energy harvesting and assesses the effect of that on this important measure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.545-563
• /
• 2015

Energy harvesting (EH) and network coding (NC) have emerged as two promising technologies for future wireless networks. In this paper, we combine them together in a single system and then present a time switching-based network coding relaying (TSNCR) protocol for the two-way relay system, where an energy constrained relay harvests energy from the transmitted radio frequency (RF) signals from two sources, and then helps the two-way relay information exchange between the two sources with the consumption of the harvested energy. To evaluate the system performance, we derive an explicit expression of the outage probability for the proposed TSNCR protocol. In order to explore the system performance limit, we formulate an optimization problem to minimize the system outage probability. Since the problem is non-convex and cannot be directly solved, we design a genetic algorithm (GA)-based optimization algorithm for it. Numerical results validate our theoretical analysis and show that in such an EH two-way relay system, if NC is applied, the system outage probability can be greatly decreased. Moreover, it is shown that the relay position greatly affects the system performance of TSNCR, where relatively worse outage performance is achieved when the relay is placed in the middle of the two sources. This is the first time to observe such a phenomena in EH two-way relay systems.