• KIEE International Transactions on Power Engineering
• /
• 제4A권1호
• /
• pp.26-32
• /
• 2004

Digital technology has advanced significantly over the years both in terms of software tools and hardware availability. It is now applied extensively throughout many area of electrical engineering including protective relaying in power systems. Digital relays have numerous advantages over traditional analog relays, such as the ability to accomplish what is difficult or impossible using analog relays. Although non real-time simulators like PSCAD/EMTDC are employed to test the algorithms, such simulations are disadvantaged in that they cannot test the relay dynamically. Hence, real-time simulators like RTDS are used. However, the latter requires large space and is very expensive. This paper uses EMTP MODELS to simulate the power system and the distance relay. The distance relay algorithm is implemented and the distance relay is interfaced with a test power system. The distance relay's performance is then assessed interactively under various fault types, fault distances and fault inception angles. The test results show that we can simulate the distance relay effectively and we can examine the operation of the distance relay very closely including its drawbacks/limitations by using EMTP MODELS. Equally important, this approach facilitates any changes that need to be carried out in order to enhance the Distance Relay under test/examination.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.147-151
• /
• 2010

논문에서는 양방향 중계기 통신에서 사용자와 중계기의 채널 환경을 기준으로 중계기의 QoS(Quality of Service)를 만족시키도록 하는 적응형 변조 기법을 이용한 네트워크 부호화 기반 양방향 중계기 통신을 제안한다. 양방향 중계기 통신은 두 사용자가 중계기의 도움을 받아 서로의 데이터를 교환하는 통신 방식이다. 네트워크 부호화를 이용한 양방향 중계기 통신은 기존의 양방향 통신에 비해 데이터 전송에 필요한 시간을 줄임으로써 높은 처리량(throughput)을 얻을 수 있다. 본 논문에서는 사용자와 중계기간의 채널 환경를 기준으로 M-QAM(Quadrature Amplitude Modulation) 변조 기법을 이용하여 시스템의 QoS를 만족시키는 적응형 변조 방법을 제안한다. 모의 실험을 통해 제안한 방식이 시스템이 원하는 QoS를 만족시킴을 보인다.

• 대한전자공학회논문지TC
• /
• 제45권6호
• /
• pp.13-19
• /
• 2008

이 논문에서는MIMO(Multi-Input Multi-Out)-OFDM(Orthogonal Frequency Division Multiplexing) 시스템에 다중 안테나를 가진 relay를 적용 할 경우, cooperation 통신을 하기 위한 기법을 제안하고 성능을 분석한다. 이동국과 relay간 뿐만 아니라 relay와 기지국간에도 STC(space time coding)에 의해 MIMO채널이 형성되어 cooperative diversity와 MIMO에 의한 diversity 이득을 함께 얻을 수 있어 시스템의 성능이 크게 향상된다. 또한 이동국과 relay에서 송신전력을 위한 간략화 된 전력할당 기법을 제안하여 이에 따른 시스템의 성능이 향상됨을 분석한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권3호
• /
• pp.95-101
• /
• 2006

This paper proposes a modified current differential relay for $Y-{\Delta}$ transformer protection. The relay uses the same restraining current as a conventional relay, but the differential current is modified to compensate for the effects of the exciting current. A method to estimate the circulating component of the delta winding current is proposed. To cope with the remanent flux, before saturation, the core-loss current is calculated and used to modify the measured differential current. When the core then enters saturation, the initial value of the flux is obtained by inserting the modified differential current at the start of saturation into the magnetization cure. Thereafter, the core flux is then derived and used in conjunction with the magnetization curve to calculate the magnetizing current. A modified differential current is then derived that compensates for the core-loss and magnetizing currents. The performance of the proposed differential relay was compared against a conventional differential relay. Test results indicate that the modified relay remained stable during severe magnetic inrush and over-excitation, because the exciting current was successfully compensated. This paper concludes by implementing the relay on a hardware platform based on a digital signal processor. The relay does not require additional restraining signal and thus cause time delay of the relay.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.287-289
• /
• 1999

This paper proposes mechanism analysis in thermal overload relay. Overload protection performance is closely connected with mechanism of thermal overload relay. In shortage of analytical technique, we have experienced many difficulties in development of thermal overload relay. We applied analytical results to develop optimum thermal overload relay.

• 융합신호처리학회논문지
• /
• 제7권2호
• /
• pp.45-52
• /
• 2006

이동 Ad-hoc 네트워크(Mobile Ad-hoc Network)는 자기 조직화, 기반망에 독립적인 네트워크의 특성상 많은 응용 분야를 가지고 있다. 본 논문에서는 mRelay(Multi-hop Relay) 시스템이라고 명명한 MANET을 위한 멀티미디어 응용 서비스 모델을 제안한다. mRelay 시스템은 무선 멀티미디어 통신 기능을 가진 무인 이동체를 mRelay 단말로 사용하여 멀티흡 통신 기반의 인터넷 연동이 가능한 멀티미디어 서비스를 제공한다. 멀티흡 라우팅 프로토콜인 AODV가 수정되어 mRelay 단말에 적용되었고, mRelay 시스템이 실내에서의 다양한 시나리오 상황에서 기반망 도움 없이 이동 Ad-hoc 네트워크를 구성하고 유지하며, 안정적인 멀티흡 멀티미디어 서비스가 가능함을 보였다. mRelay 시스템은 다양한 이동 Ad-hoc 네트워크의 응용 서비스에 활용될 수 있을 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4865-4886
• /
• 2017

The user experience of practical indoor power line communication (PLC) applications is greatly affected by the system quality-of-service (QoS) criteria. With a general broadcast-and-multi-access (BMA) relay scheme, in this work we investigate the joint source and relay power optimization of the amplify-and-forward (AF) relay systems used under indoor broad-band PLC environments. To achieve both time diversity and spatial diversity from the relay-involved PLC channel, which is time-varying in nature, the source node has been configured to transmit an identical message twice in the first and second signalling phase, respectively. The QoS constrained power allocation problem is not convex, which makes the global optimal solution is computationally intractable. To solve this problem, an alternating optimization (AO) method has been adopted and decomposes this problem into three convex/quasi-convex sub-problems. Simulation results show the fast convergence and short delay of the proposed algorithm under realistic relay-involved PLC channels. Compared with the two-hop and broadcast-and-forward (BF) relay systems, the proposed general relay system meets the same QoS requirement with less network power assumption.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.612-620
• /
• 2017

Relay coordination in power system is a complex problem and so far, meta-heuristic algorithms and other methods as an alternative approach may not properly deal with large scale relay coordination due to their huge time consuming computation. In some cases the relay coordination could be unachievable. As the urgency for a proper approach is essential, in this paper an innovative and simple relay coordination method is introduced that is able to be applied on optimization algorithms for relay protection coordination. The objective function equation of operating time of relays are divided into two separate functions with less constraints. As the analytical results show here, this equivalent method has a remarkable speed with high accuracy to coordinate directional relays. Two distribution systems including directional overcurrent relays are studied in DigSILENT software and the collected data are examined in MATLAB. The relay settings of this method are compared with particle swarm optimization and genetic algorithm. The analytical results show the correctness of this mathematical and practical approach. This fast coordination method has a proper velocity of convergence with low iteration that can be used in large scale systems in practice and also to provide a feasible solution for protection coordination in smart grids as online or offline protection coordination.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.7-12
• /
• 2004

The role of protective relay with correct setting value is very important for the reliable operation of power : system. The setting process of a protective relay is difficult and requires hard work of calculations. Therefore, KEPCO as been using PROSET2000, a computer program system, in order to automate the setting process of protective relays in power transmission network since 2000. This system has a database and relay setting modules for each type of realy with coresponding Human and Computer Interaction(HCI). For the setting of a new type of relay, it require a new module, a HCI and a database table corresponding to the new relay. But it's update is not easy in case of new type of relay. This paper discussed the update method introducing a concept of Open Interface. It addressd a method to make a new HCI for new relay in view of object-oriented method using UML(Unified Modeling Language). Using the UML, we updated the PROSET2000. HCI screens for a new relay is generated automatically using the information of the new relay stored in the database. And, the database management module is upgraded to solve problems in manage and maintain the database in view of Open Interface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.510-512
• /
• 2005

This paper introduces the development of automatic system for estimation of digital relay performance. We have developed an automatic estimation system "HRV2004(Himap Relay function Verifier 2004)" for digital relay in 2004 and it has been verified in the field for one years. This paper describes the development details and field experience of HRV2004. HRV2004 can perform a series of jobs required for the relay testing in one environment and could handle most of all models of protective relay currently produced by Hyundai Heavy Industries. The functionality of this program consists of GUI of relay setting for beginner, fault record analysis and relay performance estimation. The core of this system is an automatic reporting of estimation test. If user is only click a button for relay estimation and one will received testing report to deliver customer. Additional benefit is fast response than the manual estimation. For example, the manual estimation takes spending 6 hours but this system is about 15 minutes.