• 제목/요약/키워드: Relative value

검색결과 2,873건 처리시간 0.037초

고층 스카이브리지의 변위 허용치 산정에 대한 연구 (Study on Evaluating Displacement Tolerance of Sky-bridge in Tall Buildings)

  • 김윤곤
    • 대한건축학회논문집:구조계
    • /
    • 제36권4호
    • /
    • pp.135-142
    • /
    • 2020
  • The new method for evaluating the displacement tolerance of sky-bridges with pin-roller type supports was proposed considering both return period of phase difference between connected buildings and geometrical characteristics of skybridge. Because displacement tolerance is relative value, which is most affected by the phase difference of the connected buildings, the dynamic response of these building with time history analysis should be evaluated. However, the initial phase could not be specified, so the result of displacement tolerance would be varied with respect to initial value. Thus, the tolerance can be reasonably evaluated SRSS calculation with design displacements based on statistical approach and of each building. In addition, the geometrical characteristics of sky-bridge should be considered because the transverse displacement of sky-bridge span causes the shear deformation of the bridge and longitudinal displacement tolerance cannot release the shear deformation. Therefore, the some pin-end support in sky-bridge should have longitudinal displacement tolerance to accommodate the shear deformation. By resolving this shear deformation, it is possible not only to accommodate transverse displacement, but also to avoid the complicated joint details such as both pot bearing and guided supports with shear key.

A Design and Implementation of Yoga Exercise Program Using Azure Kinect

  • Park, Jong Hoon;Sim, Dae Han;Jun, Young Pyo;Lee, Hongrae
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권6호
    • /
    • pp.37-46
    • /
    • 2021
  • 본 논문에서는 Azure Kinect를 사용하여 요가 자세의 정확도를 측정하고 판단하는 프로그램을 설계하고 구현하였다. 이 프로그램은 Azure Kinect Camera와 센서를 통해 사용자의 모든 관절 위치를 측정한다. 측정한 관절의 값은 두 가지 방법으로 정확도를 판단하는 데이터로 사용된다. 측정된 관절 데이터는 삼각법과 피타고라스의 정리를 통하여 관절의 각도를 구한다. 또한, 측정된 관절 값은 상대적인 위치 값으로 변경한다. 각각 계산하여 구한 값은 목표하고자 하는 자세의 관절 값 및 상대적 위치 값과 비교하여 정확도를 판단한다. Azure Kinect Camera를 통해 사용자가 본인의 자세를 확인할 수 있도록 화면을 구성하고 사용자의 자세 정확도를 피드백으로 전달해 사용자의 자세 향상을 유도한다.

잣나무 묘목(苗木)의 생육환경(生育環境) 요인(要因)에 따른 생장해석적(生長解析的) 연구(硏究) (A Study on the Growth Analysis of Pinus koraiensis Seedings under Various Relative Light Intensities and Planting Densities)

  • 김영채
    • 한국산림과학회지
    • /
    • 제78권3호
    • /
    • pp.314-322
    • /
    • 1989
  • 물질생산적(物質生産的) 측면(側面)에서 잣나무에 대한 광환경(光環境) 및 식재밀도(植栽密度)를 달리한 생육조건(生育條件)과 그에 따른 묘목(苗木)의 생장관계(生長關係)를 추적(追跡)하고 생육환경(生育環境)의 개선방안(改善方案)을 위(爲)한 양묘생산(養苗生産)의 기초확립(基礎確立)을 목적(目的)으로 광도(光度) 및 식재밀도(植栽密度)를 각각 4개(個) 수준(水準)으로 구분(區分) 생육(生育)시킨 잣나무 묘목(苗木)(2-2)를 대상으로 영국계(英國系)의 생장해석법(生長解析法)을 도입(導入), 이들에 대한 묘목(苗木)의 상대생장율(相對生長率)(Relative growth rate)과 순동화율(純同化率)(Net assimilation rate) 등을 산출(算出)하였다. 또한 상대생장율(相對生長率)과 순생장율(純生長率) 간(間)의 상관관계(相關關係)를 통계적(統計的)으로 비교(比較) 분석(分析)하였던 바 잣나무 묘목(苗木)의 생육(生育) 환경개선방안(環境改善方案)의 모색이 요구(要求)되었기에 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 묘목(苗木)의 건중량생장(乾重量生長)의 변화(變化) 양상(樣狀)은 각(各) 처리구간(處理區間) 공(供)히 생육초기(生育初期)에는 큰 차이(差異)가 없었으나 생육후기(生育後期)에는 차이(差異)를 나타냈고 광도(光度)가 높을수록, 그리고 식재밀도(植栽密度)가 소(疎)할 수록 증가(增加)하여 광조건(光條件)의 변화(變化)가 물질생산(物質生産)에 미치는 영향(影響)에 주요(主要)한 변수(變數)로 작용(作用)되었다. 2. 엽면적생장(葉面積生長)은 상대광도(相對光度) 63%구(區)가 가장 컸고, 그보다 광도(光度)가 높거나 낮아질 수록 점차(漸次) 감소(減少)하였다, 상대광도(相對光度) 19%구(區)가 가장 적게 나타났다. 3. 상대생장율(相對生長率)(RGR)은 상대광도(相對光度) 63%구(區)에서 $6{\times}6/m^2$ (36본(本))구(區)의 6월(月) 생장(生長)이 최대(最大)였고, 상대광도(相對光度) 19% 구(區)에서 $12{\times}12/m^2$(224본(本))구(區)의 9월(月) 생장(生長)이 최소치(最少値)를 나타냈다. 4. 순동화율(純同化率)(NAR)은 생육초기(生育初期)에는 감소(減少)하다가 8월(月)과 9월(月)을 기점(起點)으로 증가(增加) 하였으며 상대광도(相對光度) 100%의 $6{\times}6$=36본(本)$/m^2$구(區)에서 6월(月)의 생장(生長)이 최대치(最大値)를, 그리고 상대광도(相對光度) 19%구(區)에서 $12{\times}12$=144본(本)$/m^2$구(區)의 9월(月) 생장(生長)이 최소치(最少値)를 나타냈다. 5. 상대생장율(相對生長率)과 순동화율(純同化率) 간(間)에는 모두 고도(高度)의 유의성(有意性)이 인정(認定) 되었으며 이들은 정(正)의 상관관계(相關關係)에 있었다.

  • PDF

농촌 원형경관의 문화재적 가치 속성 및 중요도 연구 (A Study on the Evaluation of Value Indicator and Importance of Prototype Landscape in Rural Areas)

  • 강영은;최동욱;홍성희;민수희;김상범;임승빈
    • 농촌계획
    • /
    • 제16권4호
    • /
    • pp.117-129
    • /
    • 2010
  • This study is to make value estimating system to valuate prototype landscape of rural and to derive itemized importance to select priority preservable object The results of the study are summarized as follows, It is examined value estimating standard by analyzing prototype landscape related previous study, law and order. Also, It is derived conclusive prototype landscape value estimating system by doing attribute assessment of preserving objects while surveying the site and interviewing professionals, Value estimating system is classified into five items of physical value which are integration, harmony, diversity, symbolism and aesthetics, The historical-cultural value are divided into four categories which are religious value, originality, historicity and scarcity, The communal values are divided into three categories which are sociality, continuing and regional locality and also divided into three categories which are rarity, primitiveness and diversity as the ecological value, Relative priority of prototype landscape value estimating system result is derived as historical-cultural value as the superior position and physical value, communal value and ecological value as the priority order. In the subordinate, historical categories are derived to be the most valuable and originality, symbolism, integration, regional locality, continuing, harmony, aesthetics, religious value, primitiveness, diversity of physical values and diversity of ecological value in order of the priority assessment The results of the study have the meaning of practical use in prior selection and preservation plan of preserving prototype landscape as practical alternative plan for systematical preservation of damaging prototype landscape.

급성 허혈성 뇌졸중에서 관류 자기공명영상과 99mTC-HMPAO 단광자방출단층촬영술을 이용한 뇌경색의 예측 (Prediction of Infarction in Acute Cerebral Ischemic Stroke by Using Perfusion MR Imaging and $^{99m}Tc-HMPAO$ SPECT)

  • Ho Cheol Choe;Sun Joo Lee;Jae Hyoung Kim
    • Investigative Magnetic Resonance Imaging
    • /
    • 제6권1호
    • /
    • pp.55-63
    • /
    • 2002
  • 목적 급성 허혈성 뇌졸중에서 관류 MR영상으로 측정한 상대적 뇌혈용적과 단광자방출전산화단층촬영으로 측정한 상대적 뇌혈류량이 나중에 발생할 뇌경색을 예측할 수 있는지 알아보고자 하였다. 대상 및 방법 급성 일측성 중대뇌동맥 폐색 환자에서 증상 발생 6시간 이내에 관류 MR영상과 99mTc-HMPAO 단광자방출전산화단층촬영을 모두 시행한 13명을 대상으로 하였다. 동맥 폐색에 의한 허혈 부위와 반대측 정상 부위에서 각 관류 변수를 측정하여 그 비(허혈 부위 관류변수 값 / 정상 부위 관류 변수 값)를 구한 후, 나중에 경색으로 이행할 부위와 그렇지 않을 부위를 판별할 수 있는 관류변수 비의 절단값을 계산하였다. 결과 : 경색으로 이행한 부위와 그렇지 않은 부위에서 상대적 뇌혈용적 비의 평균값은 각각 $0.58{\pm}0.27{\;}and{\;}0.99{\pm}0.17$ (p<0.001)이었고, 상대적 뇌혈류량 비의 평균 값은 $0.41{\pm}0.22{\;}and{\;}0.71{\pm}0.14$ (p<0.001)이었다. 경색으로 이행할 부위와 그렇지 않을 부위를 판별하는 절단값은 상대적 뇌혈용적 비가 0.80, 상대적 뇌혈류량 비가 0.56이었다. 각 절단값의 민감도, 특이도, 능률은 뇌혈용적 비가 80.6, 87.5, 82.7%이었고 상대적 뇌혈류량 비가 72.2, 75.0, 73.0%이었다. (두 관류변수 사이에서 p>0.05). 결론 : 급성 허혈성 뇌졸중에서 상대적 뇌혈용적과 상대적 뇌혈류량의 측정은 뇌경색의 발생을 예측하는 데에 유용한 것으로 사료된다.

  • PDF

자기펄스 성형 및 방전 플라즈마 소결 공정으로 제조한 텅스텐 소결체의 특성 (Fabrication and Properties of Densified Tungsten by Magnetic Pulse Compaction and Spark Plasma Sintering)

  • 이의선;변종민;정영근;오승탁
    • 한국재료학회지
    • /
    • 제30권6호
    • /
    • pp.321-325
    • /
    • 2020
  • The present study demonstrates the effect of magnetic pulse compaction and spark plasma sintering on the microstructure and mechanical property of a sintered W body. The relative density of green specimens prepared by magnetic pulse compaction increases with increase in applied pressure, but when the applied pressure is 3.4 GPa or more, some cracks in the specimen are observed. The pressureless-sintered W shows neck growth between W particles, but there are still many pores. The sintered body fabricated by spark plasma sintering exhibits a relative density of above 90 %, and the specimen sintered at 1,600 ℃ after magnetic pulse compaction shows the highest density, with a relative density of 93.6 %. Compared to the specimen for which the W powder is directly sintered, the specimen sintered after magnetic pulse compaction shows a smaller crystal grain size, which is explained by the reduced W particle size and microstructure homogenization during the magnetic pulse compaction process. Sintering at 1,600 ℃ led to the largest Vickers hardness value, but the value is slightly lower than that of the conventional W sintered body, which is attributed mainly to the increased grain size and low sintering density.

L 및 LH-모멘트법과 지역빈도분석에 의한 가뭄우량의 추정(I) - L-모멘트법을 중심으로 - (Estimation of Drought Rainfall by Regional Frequency Analysis using L and LH-Moments(I) - On the Method of L-Moments -)

  • 이순혁;윤성수;맹승진;류경식;주호길
    • 한국농공학회지
    • /
    • 제45권5호
    • /
    • pp.97-109
    • /
    • 2003
  • This study is mainly conducted to derive the design drought rainfall by the consecutive duration using probability weighted moments with rainfall in the regional drought frequency analysis. It is anticipated to suggest optimal design drought rainfall of hydraulic structures for the water requirement and drought frequency of occurrence for the safety of water utilization through this study. Preferentially, this study was conducted to derive the optimal regionalization of the precipitation data that can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. Five homogeneous regions in view of topographical and climatological aspects were accomplished by K-means clustering method. Using the L-moment ratio diagram and Kolmogorov-Smirnov test, generalized extreme value distribution was confirmed as the best fitting one among applied distributions. At-site and regional parameters of the generalized extreme value distribution were estimated by the method of L-moments. Design drought rainfalls using L-moments following the consecutive duration were derived by the at-site and regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design drought rainfall derived by at-site and regional analysis in the observed an simulated data were computed and compared. In has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE. RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design drought rainfall. Consequently, optimal design drought rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

Distribution and Habitat Chracteristics of Lonicera japonica Thunb. in the Inland and the Seashore Areas of Korea

  • Kim, Seong-Min;Shin, Dong-Il;Yoon, Seong-Tak;Song, Hong-Seon
    • 한국약용작물학회지
    • /
    • 제15권5호
    • /
    • pp.362-366
    • /
    • 2007
  • This study was conducted to evaluate the status of habitat distribution, environmental characteristics and plant species growing with Lonicera japonica in its habitats. In the distribution of plant coverage below 30%, it was 84.6% in the inland area and 80.7% in the seashore area. There was similar coverage in both inland and seashore areas. But the average relative coverage in the seashore area was 26.1%, which is a little higher than that of the inland area (22.5%). In the habitats, both inland and seashore areas showed a high distribution ratio below 10 degrees. But among them, inland areas showed a high distribution ratio (62.4%) below 10 degrees, which was about twice as much as the seashore areas (32.2%). Habitat distribution was most often found on the southern slopes in both inland and seashore areas. The average soil pH of Lonicera japonica habitat was 5.2 in the inland areas and 6.9 in the seashore areas. Also, the seashore areas showed little content of $P_2O_5$, but high content of K, Mg, Na on the other hand compared to the inland area. Miscanthus sinensis was the highest importance value (16.4) among plants growing with Lonicera japonica in their habitats in both inland and seashore areas. But in the inland areas, Artemisia princeps showed the highest importance value, and Miscanthus sinensis was the highest in the seashore areas.

비타민 E 소재의 인체생리반응 및 쾌적성 평가 (Evaluation of Thermal Physiological Responses and Comfort in Vitamin E Fabric)

  • 임순;정명희
    • 복식문화연구
    • /
    • 제13권3호
    • /
    • pp.406-413
    • /
    • 2005
  • This study performed the evaluation of skin temperature, heart rate, temperature and relative humidity of microclimate, and subjective sensation, such as thermal sensation, wet sensation and comfort sensation to estimate physiological responses of the human body and its comfortable feeling to the vitamin E fabric. Experiments were performed on the five healthy adult women whose average age was 21, at climate chamber in which temperature, relative humidity and air current were set up below $30{\pm}\;1^{\circ}C$, $50{\pm}\;15\%$ and 0.2m/s, respectively. Two kinds of clothes were used for experiments: unfinished sports clothes, with the same form and the same size, of short-sleeved knit shirt and long trousers made with $100\%$ cotton, and finished sports clothes printed with the vitamin E solution of the level of $0.88\%$. Exercises of walking (about 105 steps/minute) with the exercise intensity of 2.5 were performed for 20 minutes using treadmill. In result, the study showed significant difference (p<0.01) in average skin temperature between unfinished and finished sport clothes, and represented higher value with having unfinished sport clothes in wear than with finished one. The study also showed significant difference (p<0.01) in heart rate only during the period of exercise, and represented higher value generally with unfinished sport clothes than with finished one. There were significant differences not only in temperature of microclimate (p<0.01) but also in humidity of microclimate (p<0.05) between two sport clothes. As for the evaluation of subjective sensation, the study showed significant difference (p<0.05) in thermal sensation between the two kinds of sport clothes, significant difference in wet sensation only during the period of exercise, and significant difference (p<0.05) in comfort sensation only during the period of recovery.

  • PDF

컨조인트분석을 이용한 쇠고기 구이전문점의 이용행태에 따른 선호도분석에 관한 연구 (A Study on the Preference Analysis according to the Usage Behavior of Grilled Beef Restaurant by Conjoint Analysis)

  • 김헌철
    • 한국조리학회지
    • /
    • 제23권4호
    • /
    • pp.93-104
    • /
    • 2017
  • This study aimed to investigate the preferences for the particular menu depend upon a purpose of the events and a time slot. The study set the 16 imaginary profile of 5 selective attributes by using Conjoint Analysis for the customers who ate out at the grilled beef restaurant. The result showed that most significant factors of preference were a sirloin, Korean beef, a traditional interior design, a rice menu and the amount of marbling, in that order. In addition, the study revealed a high level of relative importance depend on the parts of meat cuts and the most preferred factor of the general customers was a sirloin in selective attributes. Next, the country of origin was important. All events showed the highest preference in the parts of meat cuts like the whole consumer group and there was a high partial value in sirloin for the purpose of the events. However, the prime ribs showed a higher level of relative importance when the customers had light meals or they participated in conferences. At the preference analysis of the important attributes and the level of partial value, the most significant factors were a sirloin, a country of origin, a traditional interior design, a rice menu, and the amount of marbling, in that order both in lunch and dinner. In addition, the study found that the parts of meat, the atmosphere in the restaurant, the quality of beef, dessert, and the country of origin were significant in order at relative importance.