• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.115-125
• /
• 2011

An accurate estimation of software development size is an important factor in calculating reasonable cost of project development and determining its success. In this study, we propose estimation models, using function point based on the functional correlation between software, with empirical data. Three models($FP_{est}(I)$, $FP_{est}(II)$, $FP_{est}(III)$) are developed with correlation and regression analysis. The validity of the models is evaluated by the significance test by comparing values of Mean Magnitude of Relative Error (MMRE) and predictions of each model at level n%. Model $FP_{est}(III)$ proved to be superior to other models such as IFPC(Indicative Function Point Count), EFPC(Estimated Function Point Count), EPFS(Early Prediction of Function Size), $FP_{est}(I)$, and $FP_{est}(II)$. As a result, the accuracy of the model appears to be very high to determine the usefulness of the model to finally overcome weakness of other estimation models. The model can be efficiently used to estimate project development size including software size or manpower allocation.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.69-75
• /
• 2011

This paper investigates phrase positional effects on the timing of F0 (pitch) peaks in Tokyo Japanese disyllabic words with varying accent type (HL or LH) and phrase position (final or non final). The F0 peak timing was normalized by the total word duration ('normalized H timing'). The normalized H timing was significantly affected by accent type and phrase position. The H timing was later in the LH accent type than in the HL accent type, and in non final positions than in final positions. In addition, to examine the validity of the quantitative results, different models of phrase position effects were compared by measuring H timing in two approaches: normalization versus relative distance measures. For the normalization measures, the H timing was measured as the time of the F0 peak divided by the total word duration or by the duration of the tone bearing syllable. For the relative distance measures, the H timing was measured as the distance in milliseconds from the end of the word or from the end of the associated syllable. The best model was the normalization by the total word duration, rather than by the duration of the tone bearing syllable. This means that phrase positional effects on the timing of F0 peaks in Japanese disyllabic words are best modeled in terms of proportion of the total word duration.

• Particle and aerosol research
• /
• v.10 no.1
• /
• pp.9-17
• /
• 2014

Several studies have been carried out on the source contribution of the particulate Polycyclic Aromatic Hydrocarbons (PAHs) over Seoul by using the Chemical Mass Balance Model (CMB)(Lee and Kim, 2007; Kim et al., 2013). To confirm the validity of the modeling results, the modified model employing a photochemical loss rate along with varying residence times and the standard model that considers no loss were compared. It was found that by considering the photochemical loss rate, a better performance was obtained as compared to those obtained from the standard model in the CMB calculation. The modified model estimated higher contributions from coke oven, transportation, and biomass burning by 4 to 8%. However, the order of the relative importance of major sources was not changed, coke oven followed by transportation and biomass burning. Thus, it was concluded that the standard CMB model results are reliable for identifying the relative importance of major sources.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.9-18
• /
• 2002

Thermal humidity characteristics were considered theoretically and experimentally. A Simply well-fitted correlation of a saturated vapor pressure-temperature curve of water was introduced based on Antoine equation to make theoretical prediction of relative humidity according to temperature variation. Characteristics of dew point were also examined theoretically and its relation with temperature and humidity was evaluated. The exact mass of water vapor in a specified humidity and temperature condition was estimated to provide useful insight into the idea about how much amount of water corresponds to a specified humidity and temperature condition in a confined system. A simple but well-fitting model of dehumidification process was introduced to anticipate the trend of relative humidity level during GN2(gaseous nitrogen) purge process in a humidity chamber. Well-suitedness of this model was also verified by comparison with experimental data. The overall appearance and specification of two thermal humidity chambers were introduced which were used to perform various thermal humidity tests in order to yield useful data necessary to support validity of theoretical models.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.164-173
• /
• 1999

Robot calibration needs accurate measurements of robot end-effector position at a number of different robot configurations. One of the efficient ways of the measurement is "Touching on Jig" method suggested in [7], which utilizes a touch sensor and a fixture consisting of various sizes of blocks. By moving the end-effector to touch the surface of a block whose position relative to the other is known, the end-effector position relative to the fixture coordinate system can be obtained at the instant of touching. However, the global size of fixture is too small to cover the various configurations of the robot. Because of the manufacturing difficulties, the fixture cannot be manufactured large enough for well distributed position measurement. It results in the improvement of robot accuracy only in the limited space near to the fixture rather than over the whole space of the robot working volume. The paper proposes a method to resolve the above problem by measuring the end-effector positions with respect to several different coordinate system using the same measurement devices. It is found that the proposed method leads the improvements of robot position accuracy over the large space of working volume. The experimental studies are performed to show the validity of the method and their results are discussed.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_1
• /
• pp.769-780
• /
• 2024

For an organization to survive and prosper, it is essential to continuously develop innovative products by proactively anticipating consumers' implicit requirements. The Kano model has become more useful since Sireli et al. (2007) and Tontini (2007) introduced a simple equation for determining the importance of characteristics by using the concept of Kano's Potential Customer Satisfaction Coefficient (PCSC). However, although several studies have utilized the PCSC concept to determine the importance of characteristics, it is surprising that the two equations have been accepted without any validation process. This study aims to propose a modified equation using PCSC and to conduct a validity test of the proposed equation, demonstrating its superiority over the previously suggested two equations, The author analysed 26 Kano related articles (27 cases), and the correlation coefficients were compared with those obtained from direct rating importance, which served as a comparative criterion. The results indicate that the proposed equation is valid for assessing characteristic importance and demonstrates significantly higher correlation coefficients with the direct method than those suggested by Tontini (2007) and Siireli et al. (2007). The proposed method offers advantages in terms of accuracy and survey duration over traditional methods that directly ask for relative importance (e.g., AHP by Saaty (1980)). Furthermore, the integration of the Kano model with IPA or QFD could enhance the accuracy and efficiency of research in determining the importance of characteristics.

• Tunnel and Underground Space
• /
• v.6 no.4
• /
• pp.335-341
• /
• 1996

This fundamental study analyzes the relationship between rock thermal properties and psychrometric properties in underground space and has a ultimate goal to develope technologies for predicting major environmental variables. The study is divided into 2 subjects (1) developement of a basic model for predicting temperature and humidity, (2) analysis of the validity of the model through application to a local underground storage space for military supplies. The basic model is built for the network of tunnel-shaped underground spaces. The model takes into account rock thermal properties and changes in moisture content in the air due to condensation/evaporation on the rock surface. Using lumped-parameter analytical method, heat flux from or to the surrounding rock is calculated and then the psychrometric properties(air quantity, pressure, temperature, humidity) are estimated through network simulation. The model can be utilized regardless of the tunnel type. The study site is a local storage space built in rock, mainly granite gneiss and quartz-porphyry. It is a U-shaped tunnel, 593.5m long and 6x6.5m wide. Relative humidity inside has to be strictly controlled under 55% to avoid erosion of a certain types of supplies stored in 6 chambers with the capacity of 300~1.000 ton. The thermal conductivity varies between 2.734 and 2.779W/m$^{\circ}C$ and the thermal diffusivity is in the range of 1.119 and $1.152{\times}10^{-6}\;m^2/s$ the specific heat between 910 and $920\;J/kg^{\circ}C$. Relative errors of the predicted values of dry/wet temperature and relative humidity are 0.8~3.0%, 0~7.5% and 0~7.0%, respectively. Apparent errors associated with the rock surface temperature seems to be partly due to the intrinsic limitations in the infrared thermometer used in this study.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.5
• /
• pp.5-13
• /
• 2022

In this study, dynamic characteristics and liquefaction resistance characteristics of silica sand which is used to simulate sandy layer were conducted using the cyclic triaxial test according to the relative density difference. The difference in liquefaction resistance with the relative density was confirmed through the test results, which the relative density conditions were changed to 40%, 60%, and 80%, and the cyclic resistance ratio (CRR) curve of the silica sand was obtained. In addition, in order to examine the validity of the liquefaction resistance ratio (CRR) curve, artificial silica sand ground was created, and liquefaction potential was evaluated through the simple assessment method and the detailed assessment method, and the safety factors of each were compared.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.363-371
• /
• 2023

Purpose: This paper aims to develop evaluation criteria of Plan- 'Understanding the Organization' in the PDCA(Plan-Do-Check-Act) requirements of ISO 22301 which is a global standard in the area of BCMS(Business Continuity Management System). Method: The group of 20 experts in the BCMS checked for the validity of the evaluation criteria of Plan- 'Understanding the Organization' by the modified Delphi technique and relative importance are surveyed by the group. Results: As a result, the 12 evaluation criteria with relative importance that can be applied for BCMS evaluation of the organizations are developed and proposed. Conclusion: In order to introduce a quantitive evaluation in the BCMS, it was concluded that evaluation criteria need to be chosen and given relative importance, thus the criteria with the importance could be used for effective evaluation

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1184-1186
• /
• 2002

Recently, according to the industrial development relative to multimedia, demand of display system is radically increase, thus development for power supply of back-lighting is advanced lively. Fluorescent lamp operated at high frequency by the electronic ballast provide benefits like unnoticeable flicker effect and higher luminous efficiency. This paper presents analysis of Push-Pull type resonant inverter for CCFL drive for stable characteristic and life improvement of fluorescent lamp operated at high frequency. Also it has proposed design procedure of Current-Fed type resonant inverter. On the basis of equivalent circuit, component characteristic and suitable region of operation frequency from simulation using Matlab and Pspice is predicted. Suitability of applied equivalent model and validity of design process from the experimental results with CCFL inverter.