• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.161-167
• /
• 2012

It is known that big brown bats can distinguish echo of a prey at various angles. In this paper, we suggest a new object localization strategy using ultrasonic echolocation. We calculate the relative energy ratio between a high frequency component of ultrasound signal and a low frequency component of ultrasound signal for a target object. We found the measure depends on bearing angle of the object in space. We also tested energy ratio of echoed FM ultrasound signals depending on frequency, based on cross-correlation. It can determine the relative angular position of objects even though the reflected signals are congested form each object.

• Steel and Composite Structures
• /
• v.10 no.4
• /
• pp.317-329
• /
• 2010

According to the results of 9 circular concrete filled steel tube (CFT) push-out tests, a new theoretical model for average bond stress versus free end slip curve is proposed. The relationship between verage bond stress and free end slip is obtained considering some varying influential parameters such as slenderness ratio and diameter-to-thickness ratio. Based on measured steel tube strain and relative slip at different longitudinal positions, the distribution of bond stress and relative slip along the length of steel tube is obtained. An equation for predicting the varying bond-slip relationship along longitudinal length and a position function reflecting the variation are proposed. The presented method can be used in the application of finite element method to analyze the behavior of CFT structures.

• YAKHAK HOEJI
• /
• v.32 no.5
• /
• pp.319-327
• /
• 1988

Pharmacokinetic interaction of cimetidine and isoniazid was investigated in the rabbits. Isoniazid was administered orally at a dose of 30mg/kg to six rabbits after 10, 20, and 30mg/kg pretreatment of cimetidine twice a day for 10days. Concentration of the free and the total isoniazid in the blood and the urine was determined by spectrophotometer. Relative bioavailability and biological half-life($t\frac{1}{2}{\beta}$) were increased significantly by cimetidine pretreatment. Overall elimination rate constant and total clearance of isoniazid were decreased significantly by cimetidine pretreatment. The ratio of metabolites to isoniazid in the blood and the urine was decreased significantly by cimetidine pretreatment. Relative bioavailability, INAH to metabolites ratio in the blood and decrease in total clearance were highly correlated with the does of cimetidine pretreated. This result might be due to the inhibition of isoniazid metabolism in the liver by cimetidine pretreatment.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.1-8
• /
• 2001

This paper deals with magnetic field analysis and computation of cogging torque using an analytical method in Interior Permanent Magnet Motor (IPMM). The magnetic field is analyzed by solving space harmonics field analysis due to magnetizing and the cogging torque is analyzed by combining field analysis with relative permeance. In reducing cogging torque, the inferences of various design variable and magnetizing distribution are investigated. It is shown that the slot and pole ratio (the pole-arc / pole-pitch ratio) combination has a significant effect on the cogging torque and presents a optimal flux barrier shape to reduce the cogging torque. The validity of the proposed technique is confirmed with 2-D Finite Element(FE) analysis.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.545-552
• /
• 1996

Researches on chromosome are very significant in cytogenetics since a gene of the chromosome controls revelation of the inheritance plasma The human chromosome analysis is widely used to diagnose genetic disease and various congenital anomalies. Many researches on automated chromosome karyotype analysis has been carried out, some of which produced commercial systems. However, there still remains much room for improving the accuracy of chromosome classification. In this paper, we propose an algorithm for reconstruction of the chromosDme image to improve the chromosome classification accuracy. Morphological feature parameters are extracted from the reconstructed chromosome images. The reconstruction method from chromosome image is the 32 direction line algorithm. We extract three morphological feature parameters, centromeric index(C.I.), relative length ratio(R.L.), and relative area ratio(R.A.), by preprocessing ten human chromosDme images. The experimental results show that proposed algorithm is better than that of other researchers'comparing by feature parameter errors.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.103-107
• /
• 1996

In this paper, We propose an algorithm for reconstitution of chromosome images to extract its morphological feature parameters. It is reconstituted from 460 chromosome images using the 32 direction line algorithm. We extract three morphological feature parameters such as centromeric index, relative length ratio, and relative area ratio. The experiment results show that our method is batter than that of other researchers comparing with the error of feature parameters.

• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.24-31
• /
• 2001

Ultrafiltration membranes base on copoly(amide-imide) derivatives were prepared by the phase inversion method and the factors determining the permeation characteristics of membrane were investigated. The permeation behavior was observed by the relative ratio of permeate flux (J$\_$t/)/pure water flux (J$\_$o/). The characteristics through membrane were measured using aqueous solution of poly(ethyleneglycol) (MW 2.0$\times$10$\^$4/) over a temperature range of 10∼90$\^{C}$. With increasing the operating temperature, the relative ratio of flux became high. All the membranes had good chemical stability. Copoly(amide-imide) membranes having various Permeation properties could be obtained. Further, it was proved that the membrane performances could be determined from the preparation conditions as well as various operating conditions.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1056-1059
• /
• 1995

The bulk photopolymerization of methyl methacrylate (MMA) with primary arylsilane (e.g., phenylsilane) and various primary alkylsilanes (e.g., benzylsilane, 3-phenoxyphenyl-1-silabutane, 3-naphthyl-1-silabutane, and 3-chlorophenyl-1-silabutane) was performed to produce poly(MMA)s containing the corresponding silyl moiety as an end group. It was found for the phenylsilane that while the polymerization yields increased and then decreased with a turning point at the molar ratio of MMA:silane=10:1 as the relative silane concentration increases, the polymer molecular weights decreased, and the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increment of molar ratio of silane over MMA. The photopolymerization yield of MMA with the arylsilane was found to be higher than those with the alkylsilanes and without the silanes. Thus, the silanes seemed to significantly influence on the photopolymerization as both chain initiation and chain transfer agents.

• Structural Engineering and Mechanics
• /
• v.11 no.1
• /
• pp.49-70
• /
• 2001

This paper is concerned with a study on thermo-elastoplastic characteristics of functionally graded composite. Compared to the classical layered composites, it shows a wide range of thermo-elastoplastic characteristics according to the choice of two major parameters, the thickness-wise volume fraction of constituents and the relative thickness ratio of the graded layer. Therefore, by selecting an appropriate combination of the two parameters, one is expected to design the most suitable heat-resisting composite for a given thermal circumstance. Here, we address the parametric investigation on its characteristics together with theoretical study on thermo-elastoplasticity and numerical techniques for its finite element approximations. Through the numerical experiments, we examine the influence of two parameters on the thermo-elastoplastic characteristics.

• Communications for Statistical Applications and Methods
• /
• v.6 no.2
• /
• pp.621-634
• /
• 1999

Consider the several methods of constructing interval for relative ration from two independent binomial samples. The special interests are gives in the cases of low rates and small samples. bias-corrected and accelerated bootstrap method is proposed to overcome are the non-efficiency of current methods based on asymptotic resuts. Simulation studies are presented to demonstrate the performance of the proposed method.