• Journal of Plant Biology
• /
• v.36 no.2
• /
• pp.159-170
• /
• 1993

We investigated the effects of maternal and paternal parentage, and ovule position in a pod on seed development, weight, and progeny performance, using an annual crop commonly called cowpea (Vigna unguiculata L.). The experiment was conducted in a greenhouse. Nine maternal parents were randomly selected, and 3 individuals were chosen as paternal parents based on the male fitness components. Five types of hand-pollination were attempted on each flower of the maternal plants to evaluate the influence of paternal identify. Independent variables such as parentage and ovule position affected the pattern of seed development. Ovules in the middle position of the pod exhibited a much higher probability of seed maturation than those at the stylar and basal positions, confirming the position effect. These independent variables also appeared to exert a significant effect on seed weight, although it was not possible to evaluate the relative importance of those variables due to a significant interaction between parents. Mixed pollination tended to yield heavier seeds than other paternal parents. Ovules in the middle and basal end positions produced heavier seeds than those at the stylar end regardless of maternal and paternal parentage. Seed weight was independent of all measurements of progeny performance. At week 2 after germination significant paternal effects were found to be mediated through the ovule position in a pod. In particular, the progeny derived from self-pollination performed worse than the progeny from other paternal parentage. The progeny performance at week 4 after germination was affected by maternal parents independently of seed weight. These results show that paternal and maternal effects were quite consistent from the seed development to early growth of the progeny. Consequently, maternal and paternal effects on seed development and weight, and progeny performance may reflect, at least to some extent, genetic contribution of both parents. If so, it is possible for sexual selection on maternal and paternal function to generate the evolution of reproductive traits related to seed production.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.273-278
• /
• 2016

In HEVC variable block size motion estimation, same search window data are duplicatedly used in each block size. It increases memory bandwidth, and it is difficult to exploit early termination. In this paper, largest block size and its corresponding smaller block sizes with same positions are performed at the same time. It reduces memory bandwidth and computation by reusing search window data and computation results. In the early termination, image quality can be degraded when it determines early termination by observing largest block size only, since smaller block sizes cannot be equally terminated due to their relative positions. So, in this paper, processing order of early termination is changed to perform smaller block sizes in turns. The designed motion estimation engine was described in Verilog HDL and it was synthesized and verified in 0.18um process technology. Its gate count and maximum operating frequency are 36,101 gates and 263.15 MHz, respectively.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.88-95
• /
• 2020

In this study, we present methods to quantitatively analyze and correct the distortions and biocular parallaxes in a head-up display (HUD). To analyze asymmetrical distortions, five kinds of distortions are proposed and evaluated at five eye positions of an eyebox. The differences between distortions evaluated at the four corners of the eyebox and that at the center are defined as the relative distortions, which occur due to head motion of the driver. We also define the convergence and divergence parallaxes at six biocular positions in the eyebox to quantitatively analyze them. Using these analytical methods, we constrain the degree of biocular parallaxes and distortion changes with eye position to be small, so that an optical system nearly free from them can be obtained by optimization design for HUD optics.

• Journal of The Korean Astronomical Society
• /
• v.33 no.2
• /
• pp.89-95
• /
• 2000

As an efficient method to detect blending of general gravitational microlensing events, it is proposed to measure the shift of source star image centroid caused by microlensing. The conventional method to detect blending by this method is measuring the difference between the positions of the source star image point spread function measured on the images taken before and during the event (the PSF centroid shift, ${\delta}{\theta}$c,PSF). In this paper, we investigate the difference between the centroid positions measured on the reference and the subtracted images obtained by using the difference image analysis method (DIA centroid shift, ${\delta}{\theta}$c.DIA), and evaluate its relative usefulness in detecting blending over the conventional method based on ${\delta}{\theta}$c,PSF measurements. From this investigation, we find that the DIA centroid shift of an event is always larger than the PSF centroid shift. We also find that while ${\delta}{\theta}$c,PSF becomes smaller as the event amplification decreases, ${\delta}{\theta}$c.DIA remains constant regardless of the amplification. In addition, while ${\delta}{\theta}$c,DIA linearly increases with the increasing value of the blended light fraction, ${\delta}{\theta}$c,PSF peaks at a certain value of the blended light fraction and then eventually decreases as the fraction further increases. Therefore, measurements of ${\delta}{\theta}$c,DIA instead of ${\delta}{\theta}$c,PSF will be an even more efficient method to detect the blending effect of especially of highly blended events, for which the uncertainties in the determined time scales are high, as well as of low amplification events, for which the current method is highly inefficient.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.511-517
• /
• 2004

The existing rehabilitation systems were developed to exercise specific joints only. Therefore rehabilitating the various joints of human, various kinds of devices are need. To overcome these defects, this paper proposed the CMRS, an integrated system that performs various rehabilitation exercises. The characteristics of motion and the positions between human body and the system were investigated with the kinematics analysis of upper and lower limb of human body. We presented a proper mechanism to develop a rehabilitation device on the base of the study and studied the relative positions between head part and human joints. Through the simulations, the possibility of rehabilitation system was verified. And the base frame was also developed for convenient and stable position control. Finally, the CMRS was developed as an 8 degree of freedom mechanism. It is expected that the CMRS will be applied to the rehabilitations of various joints.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1131-1135
• /
• 2010

This paper presents a method to capture the posture of the human lower-limbs on the 3D space by using a single camera and a planar mirror. The system estimates the pose of the camera facing the mirror by using four coplanar IR markers attached on the planar mirror. After that, the training space is set up based on the relationship between the mirror and the camera. When a patient steps on the weight board, the system obtains relative position between patients' feet. The markers are attached on the sides of both legs, so that some markers are invisible from the camera due to the self-occlusion. The reflections of the markers on the mirror can partially resolve the above problem with a single camera system. The 3D positions of the markers are estimated by using the geometric information of the camera on the training space. Finally the system estimates and visualizes the posture and motion of the both legs based on the 3D marker positions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.155-163
• /
• 2022

The tillering potential of panicle number type (PNT) rice greatly varies with planting density. Moreover, grain filling and ripening differ depending on the panicle position, which may further affect rice grain quality. The present study evaluated the grain quality of PNT rice sparsely planted to reduce production costs. The physicochemical characteristics of starch from the grains of PNT type rice 'Ilpum' planted at different densities (37, 50, 60, and 80 plants/3.3 m²) and at different positions of panicles (upper or lower on the culm) were determined. Overall, as the planting density decreased, the number of panicles increased but the starch content decreased, which further reduced the 1,000-grain weight. In particular, at the lowest density (37 plants/3.3 m²), protein content increased but particle size, enthalpy, and relative crystallinity decreased. The effects were more pronounced at lower than at upper panicle positions. These findings indicate that tillering potential differs with planting density, ultimately affecting the palatability of rice grains. Based on these findings, we propose restricting rice transplantation to a planting density of ≤37 plants/3.3 m² to achieve the best quality of grains at lower costs and with less labor.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.173-178
• /
• 2024

This study presents a technique for assessing the dimensional quality of assembly parts in Prefabricated Steel Structures (PSS) using a stereo vision sensor. The stereo vision system captures images and point cloud data of the assembly area, followed by applying image processing algorithms such as fuzzy-based edge detection and Hough transform-based circular bolt hole detection to identify bolt hole locations. The 3D center positions of each bolt hole are determined by correlating 3D real-world position information from depth images with the extracted bolt hole positions. Principal Component Analysis (PCA) is then employed to calculate coordinate axes for precise measurement of distances between bolt holes, even when the sensor and structure orientations differ. Bolt holes are sorted based on their 2D positions, and the distances between sorted bolt holes are calculated to assess the assembly part's dimensional quality. Comparison with actual drawing data confirms measurement accuracy with an absolute error of 1mm and a relative error within 4% based on median criteria.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.46-55
• /
• 2006

The purpose of this study is a development of an automatic mosaicing for applying to large number of airborne multispectral images, which reduces manual operation by human. 2436 airborne multispectral images were acquired from DuncanTech MS4100 camera with three bands; green, red and near infrared. LIDAR(LIght Detection And Ranging) data and GPS/INS(global positioning system/inertial navigation system) data were collected with the multispectral images. First, the multispectral images were converted to image patterns by unsupervised classification. Their patterns were compared with those of adjacent images to derive relative spatial position between images. Relative spatial positions were derived for 80% of the whole images. Second, it accomplished an automatic mosaicing using GPS/INS data and unsupervised classification. Since the time of GPS/INS data did not synchronized the time of readout images, synchronized GPS/INS data with the time of readout image were selected in consecutive data by comparing unsupervised classified images. This method realized mosaicing automatically for 96% images and RMSE (root mean square error) for the spatial precision of mosaiced images was only 1.44 m by validation with LIDAR data.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.3
• /
• pp.105-110
• /
• 2016

PURPOSE: The aim of this study was to investigate the influence of hip abduction velocity and position change on the relative onset times of the gluteus medius, the tensor fascia latae, and the quadratus lumborum in healthy subjects. METHODS: For this study, 15 healthy young adults were recruited. The subjects were asked to move their hip joints up to 35 degrees of abduction at a speed of $70^{\circ}/sec$ and $17.5^{\circ}/sec$ in the supine and side-lying positions. Electromyography data was collected for the gluteus medius, tensor fascia latae, and quadratus lumborum to determine the onset times. RESULTS: There were significant differences between the fast speed ($70^{\circ}/sec$) and the slow speed ($17.5^{\circ}/sec$) in hip abduction in a supine position and in a side-lying position, relatively. The onset time of the gluteus medius was faster than that of the tensor fascia latae and the quadratus lumborum in the side-lying position at the speed of $70^{\circ}/sec$ and $17.5^{\circ}/sec$. CONCLUSION: The findings of this study indicated that hip abduction in a side-lying position is an effective method to recruit the gluteus medius earlier than the tensor fascia latae and the quadratus lumborum. Thus, the exercise position is considered necessory in the purpose of rehabilitation for gluteus medius muscle strengthening program.