• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.635-643
• /
• 2007

국내에 고해상도 지도제작용 항공디지털카메라 영상의 도입 및 공급이 현실화됨에 따라 항공디지털카메라 영상을 이용한 수치지도의 제작 및 갱신에 많은 관심이 모아지고 있다. 본 연구는 푸쉬부룸 항공디지털카메라 영상을 이용하여 기존의 1/1,000 수치지도의 갱신방법을 제시하고자 하였다. GPS측량성과를 이용하여 기하보정을 수행하고, 수치도화를 위해 수치사진측량시스템을 이용하였다. 수치도화는 건물 및 도로를 묘사하였고, GPS측량성과를 이용하여 절대위치정확도 평가와 해석도화에 의해 제작된 수치지도를 이용하여 상대위치정확도 평가를 수행하였다. 절대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.172m,\;{\pm}0.127m$, 평균거리오차는 0.208m, 상대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.238m,\;{\pm}0.281m$, 평균거리오차는 0.337m로 나타났다. 따라서, 본 연구에서 제시한 항공디지털카메라 영상을 이용한 수치지도 갱신방법은 국토지리정보원 규정의 허용오차 이내였으므로, 향후 국가기본도 제작은 물론 지자체의 GIS사업 및 다양한 분야에 활용할 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권2호
• /
• pp.87-94
• /
• 2019

The Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) positioning has been widely used in geodesy, surveying, and navigation fields. RTK can benefit enormously from the integration of multi-GNSS. In this study, we develop a GPS/BeiDou Navigation Satellite System (BDS) RTK integration algorithm for long baselines ranging from 128 km to 335 km in South Korea. The positioning performance with GPS/BDS RTK, GPS-only RTK, and BDS-only RTK is compared in terms of the positioning accuracy. An improvement of positioning accuracy over long baselines can be found with GPS/BDS RTK compared with that of GPS-only RTK and that of BDS-only RTK. The positioning accuracy of GPS/BDS RTK is better than 2 cm in the horizontal direction and better than 5 cm in the vertical direction. A lower Relative Dilution of Precision (RDOP) value with GPS/BDS integration can obtain a better positional precision for long baseline RTK positioning.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.367-372
• /
• 2000

Accuracy of a machined component is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the accuracy of this relative motion is the geometric error of machine tools. In this study, geometric error is modeled using form shaping motion of machine tool, where a form shaping function is derived from the homogeneous transformation matrix. Geometric errors are measured by laser interferometer. After that, the local positioning error can be estimated from the form shaping model and geometric error data base. From this information, we can remodel the part by shifting the design surface to the amount of positional error. By generating tool path to the redesigned surface, we can reduce the machining error.

• 한국측량학회지
• /
• 제26권5호
• /
• pp.529-536
• /
• 2008

상대측위는 좌표가 정확히 알려진 측점을 기준으로 다른 측점의 좌표를 상대적으로 결정하는 방법으로 측지분야 및 정밀측위 분야에 활용되고 있다. DGPS(Differential GPS) 기법은 일정한 거리 내에서 위성과 수신기의 공통오차를 소거할 수 있다는 장점이 있지만 기선의 길이가 증가할수록 오차가 증가하는 단점을 가지고 있다. GPS 절대측위는 상대측위와는 달리, 원하는 측점의 수신기에서 수신한 GPS 위성들의 신호를 이용하여 독립적으로 측점의 위치를 결정하는 방식이다.이때 관측된GPS 신호에는 위성시계 오차, 전리층 및 대류권 통과에 따른 오차, 다중경로 오차 등 위치 결정에 영향을 주는 여러 오차 요인들이 포함되어 있어 이를 보정해 주어야 한다. 본 연구에서는 Bernese GPS Software 5.0을 이용한 정밀절대측위 방법과 AUSPOS - Online GPS Processing Service를 이용한 상대측위 방법으로 국토지리정보원의 GPS 상시관측소 관측자료를 처리하고 이를 국토지리정보원의 고시성과와 비교.분석하여 정밀절대측위를 이용한 정밀위치결정의 정확도를 분석하고 그 효용성을 제시 하고자 한다.

• 대한인간공학회지
• /
• 제21권3호
• /
• pp.47-58
• /
• 2002

The similarity of shape of shape of interface between human cognitive map and real product is the important factor to determine the human performance. Nevertheless, the degree of similarity between these has not been defined quantitatively in recent studies. Therefore, in this study, the cognitive map and the mental workload were measured by SMM(Sketch Map Method) and RNASA-TLX(Revision of NASA-Task Load Index). And the numerical expression of the accuracy point was suggested for the quantitative calculation of relative positional similarity between cognitive map and real product. In the experiment, nine subjects were participated and two kinds of vehicles were used. Mental workload was mental workload was measured immediately after the road test. The result of analysis on the relationship between accuracy and mental workload shows that the negative correlation exists on each vehicle, and the lower score of mental workloads id measured on the vehicle that has the higher score of accuracy between two vehicles.

• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.333-340
• /
• 2008

지상라이다에 의한 건물 실내 모델링을 구축하고 정확도를 분석하기 위해 제원이 다른 2개의 지상라이다를 실험지역에 적용하였다. 본 연구는 실내 공간 모델링을 위해 스캐닝 된 점군 단위에 대하여 3차원 정합 시 다량의 기준점 획득이 어려운 환경 하에서 (1) 점군 단위별 구조물 좌표계로 변환하여 처리한 경과와 (2) 점 군간 상호 정합 후 기준점에 의한 일괄 좌표변환 결과와의 편차를 비교하였다. 실험결과, 제원에 다르더라도 공통적으로 점군 정합 후 일괄처리 결과가 점군 단위별 변환 후 정합한 방법보다 오차의 크기, 분포가 적게 나타나고 있음을 확인하였다.

• 한국측량학회지
• /
• 제37권2호
• /
• pp.55-62
• /
• 2019

The stereo geometry establishment based on the precise sensor modeling is prerequisite for accurate stereo data processing. Ground control points are generally required for the accurate sensor modeling though it is not possible over the area where the accessibility is limited or reference data is not available. For the areas, the relative orientation should be carried out to improve the geometric consistency between the stereo data though it does not improve the absolute positional accuracy. The relative orientation requires conjugate points that are well distributed over the entire image region. Therefore the automatic conjugate point extraction is required because the manual operation is labor-intensive. In this study, we applied the method consisting of the key point extraction, the search space minimization based on the epipolar line, and the rigorous outlier detection based on the RPCs (Rational Polynomial Coefficients) bias compensation modeling. We tested different parameters of window sizes for Kompsat-2 across track stereo data and analyzed the RPCs precision after the bias compensation for the cases whether the epipolar line information is used or not. The experimental results showed that matching outliers were inevitable for the different matching parameterization but they were successfully detected and removed with the rigorous method for sub-pixel level of stereo RPCs precision.

• 수산해양기술연구
• /
• 제20권2호
• /
• pp.105-111
• /
• 1984

추측항법과 Loran C 항법을 결합한 Hybrid 항법의 정도를 평가하기 위하여, 군산수산전문대학 실습선 전북 401, 403 호에 설치되어 있는 Hybrid항법장치를 이용하여 1982년 7월부터 1983년 6월 사이에 한국서해안 해역에서 실선관측을 행하여 그 측위의 정도를 Radar 위치와 비교.검토한 결과는 다음과 같다. 1. 9970, 5970 Chain의 Loran C 시간차의 표준편차는 각각 약 0.21$\mu$s, 약 0.06$\mu$s로 5970 Chain의 시간차 변동이 9970 Chain보다 적었다. 2. Hybrid위치와 Loran C 위치는 Radar 위치와의 편위거리가 각각 약 0.4 mile, 약 0.51 mile로서 Hybrid 항법이 Loran C 항법보다 정도가 더 높았다. 3. Hybrid 위치와 Loran C의 계산기 simulation 위치는 Radar 위치와의 위치거리가 각각 0.4 mille, dir 0.98 mile로 Hybrid 항법이 Loran C의 계산기 simulation 위치보다 정도가 더 높았으며, 추측위치의 미소한 변동에 대한 Loran C의 변위량을 보정하면 Loran C의 계산기 simulation 위치의 정도도 더 높일 수 있음을 알 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.74-74
• /
• 2002

This paper describes a corner matching technique for automatic relative orientation. Automatically matched corner points from stereo aerial images are used to a data set and help to improve automation of relative orientation process. A general corner matching process of overall image to image has very heavy operation and repetitive computation, so very time-consuming. But aerial stereo images are approximately seventy percent overlapped and little rotated. Based this hypothesis, we designed a sectional corner matching technique calculating correlation section by section between stereo images. Although the overlap information is not accurate, if we know it approximately, the matching process can be lighter. Since the size of aerial image is very large, corner extraction process is performed hierarchically by creating image pyramid, and corners extracted are refined at the higher level image. Extracted corners at the final step are matched section by section. Matched corners are filtered using positional information and their relation and distribution. Filtering process is applied over several steps because the thing affecting to get good result-good relative orientation parameter- is not the number of matched corner points but the accuracy of them. Filtered data is filtered one more during the process calculating relative orientation parameters. When the process is finished, we can get the well matched corner points and the refined Von-Gruber areas besides relative orientation parameters. This sectional corner matching technique is efficient by decreasing unnecessarily repetitive operations and contributes to improve automation for relative orientation.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.37-46
• /
• 2016

The difference between definition time of GPS (Global Positioning System) position data and actual display time of car positions on a map could reduce the accuracy of car positions displayed in PND (Portable Navigation Device)-type CNS (Car Navigation System). Due to the time difference, the position of the car displayed on the map is not its current position, so an improved method to fix these problems is required. It is expected that a method that uses predicted future positionsto compensate for the delay caused by processing and display of the received GPS signals could mitigate these problems. Therefore, in this study an analysis was conducted to correct late processing problems of map positions by mapmatching using a Kalman filter with only GPS position data and a RRF (Road Reduction Filter) technique in a light-weight CNS. The effects on routing services are examined by analyzing differences that are decomposed into along and across the road elements relative to the direction of advancing car. The results indicate that it is possible to improve the positional accuracy in the along-the-road direction of a light-weight CNS device that uses only GPS position data, by applying a Kalman filter and RRF.