• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4968-4986
• /
• 2017

In this paper, we primarily address the difficulty of automatic generation of a plausible depth map from a single image in an unstructured environment. The aim is to extrapolate a depth map with a more correct, rich, and distinct depth order, which is both quantitatively accurate as well as visually pleasing. Our technique, which is fundamentally based on a preexisting DepthTransfer algorithm, transfers depth information at the level of superpixels. This occurs within a framework that replaces a pixel basis with one of instance-based learning. A vital superpixels feature enhancing matching precision is posterior incorporation of predictive semantic labels into the depth extraction procedure. Finally, a modified Cross Bilateral Filter is leveraged to augment the final depth field. For training and evaluation, experiments were conducted using the Make3D Range Image Dataset and vividly demonstrate that this depth estimation method outperforms state-of-the-art methods for the correlation coefficient metric, mean log10 error and root mean squared error, and achieves comparable performance for the average relative error metric in both efficacy and computational efficiency. This approach can be utilized to automatically convert 2D images into stereo for 3D visualization, producing anaglyph images that are visually superior in realism and simultaneously more immersive.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1302-1309
• /
• 2012

본 논문은 2D/3D 동영상 변환을 위한 그룹화된 객체별 깊이 정보의 차등 적용 기법에 관한 연구이다. 기존의 깊이 정보 획득 기법 중 움직임 정보를 깊이 정보로써 사용할 때 움직임이 존재하지 않는 객체의 경우 깊이 정보를 획득할 수 없어 해당 객체의 3D 효과를 얻을 수 없는 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하고자 객체와 배경을 추출하고 객체에 움직임 정보를 이용한 깊이 정보를 할당하는 과정을 거친 후, 배경과 깊이 정보가 할당되지 못한 객체에 깊이 단서 중 하나인 상대적 높이 단서를 이용한 깊이 정보를 할당함으로써 모든 객체에서 3D 효과를 얻을 수 있는 기법을 제안한다. 제안한 기법으로 깊이맵을 생성하여 DIBR(Depth Image Based Rendering)으로 3D 영상을 생성하여 확인한 결과 움직임이 없는 객체에서도 3D 효과를 얻을 수 있음을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.357-359
• /
• 2010

단안영상에서 영상의 깊이를 판단하기 위해서 사용하는 소실점은 건물, 도로와 같은 건축물이 포함된 실외영상이나 복도, 방 내부 등의 실내구조에 대한 영상에서 소실점은 매우 강력한 깊이단서이다. 소실점을 이용한 깊이지도는 2차원 영상에서 3차원 공간구조를 복원하기위해 사용된다. 하지만 소실점이 영상 내에 존재하는 경우 소실점의 위치에 따라서도 서로 다른 상대적 깊이표현 방법이 필요하다. 본 논문에서는 영상에 존재하는 소실점의 위치를 고려하여 보다 개선된 depth-map 생성하였다. 제안된 방법은 소실점이 위치하는 영역을 7구역으로 정의하고 영역에 따라서 서로 다른 깊이 방향을 제안하였다.

• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.175-181
• /
• 1987

개단 강관말뚝의 선단지지력은 폐색 효과에 의하여 발생되는데 이 폐색 효과는 말뚝의 직경에 대한 관입깊이의 비 즉, 상대 관입깊이와 밀접한 관계가 있는 것으로 알려져 있다. 이에 본 연구에서는 폐색 효과를 종합적으로 평가하기 위하여 지반의 상대밀도와 모형말뚝의 상대 관입 깊이를 달리하여 재하시험을 수행하였으며 개단 말뚝의 유효직경을 축소시킬 목적으로 십자 모양의 칸막이 판을 선단에 부착한 모형말뚝에 대한 시험도 병행하였다. 그 결과로서 개단 말뚝은 말뚝의 극한 지지력을 기준으로 폐색효과를 평가할 때 말뚝 타설 지반이 단단할수록 작은 상대관입깊이에서 큰 폐색효과를 얻을 수 있으나 100%의 폐색효과는 지반의 상대밀도에 상관없이 대략 상대관입깊이 25 정도에서 발휘된다는 사실을 알았다. 그리고 칸막이 판의 설치로 인한 폐색효과의 증대는 기대하기 어려운 것으로 판단된다.

• 한국수산과학회지
• /
• 제56권3호
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• Geomechanics and Engineering
• /
• 제38권2호
• /
• pp.165-177
• /
• 2024

Liquefaction phenomenon refers to a phenomenon in which excess pore water pressure occurs when a dynamic load such as an earthquake is rapidly applied to a loose sandy soil ground where the ground is saturated, and the ground loses effective stress and becomes liquid. The laboratory repetition test for liquefaction evaluation can be performed through a repeated triaxial compression test and a repeated shear test. In this regard, this study attempted to evaluate the effects of the relative density of sand on the liquefaction resistance strength according to particle size distribution using repeated triaxial compression tests, and additional experimental verification using numerical analysis was conducted to overcome the limitations of experimental equipment. As a result of the experiment, it was confirmed that the liquefaction resistance strength increased as the relative density increased regardless of the classification of soil, and the liquefaction resistance strength of the SP sample close to SW was quite high. As a result of numerical analysis, it was confirmed that the liquefaction resistance strength increased as the confining pressure increased under the same relative density, and the liquefaction resistance strength did not decrease below a certain limit even though the confining pressure was significantly reduced at a relatively low relative density. This is judged to be due to a change in confining pressure according to the depth of the ground. As a result of analyzing the liquefaction resistance strength according to the frequency range, it was confirmed that there was no significant difference from the laboratory experiment results in the basic range of 0.1 to 1.0 Hz.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1378-1385
• /
• 2002

The importance of direct genetic, maternal, heterosis and epistatic effects were examined on post-weaning weight, height, length, girth, fat depth and muscle (ratio of stifle to hip width) with dry and wet season gains in these traits. The breeds used were two pure breeds (Jersey and Limousin), the Limousin${\times}$Jersey $F_1$, and two backcrosses ($F_1{\times}$Jersey dams and $F_1{\times}$Limousin dams). Direct genetic effects were large (p<0.001) for all traits except for length. Jersey maternal effects were large for weight, girth, fat depth and muscle in the post-weaning wet season gains which is an evidence of the impact of Jersey dam on progeny beyond weaning. There were large heterosis effects on fat depth and muscle relative to other traits. Epistatic effects were observed for post-weaning performance in weight, girth, fat depth and muscle. There are indications that there were different genetic effects for post-weaning compared to preweaning growth traits. Thus, it could be hypothesized from this study that different quantitative trait loci (QTL) affect early and late growth in Jersey and Limousin cross cattle breeds. The follow up work will examine the different chromosomal gene effects on pre- and post-weaning growth.

• 한국토양비료학회지
• /
• 제44권5호
• /
• pp.722-726
• /
• 2011

The management standard on soil conditions in 'Fuji' apple to produce high quality fruit were not yet made. Therefore, this study was carried out to investigate the optimum soil environmental conditions of ten contents on production of high quality fruit in 'Fuji' apple. The soil and fruit characteristics were analyzed at total 60 orchards in major apple producing areas such as Chungju, Moonkyeung, yeongju, andong, yeosan and yeongcheon (10 orchards an area). The soil environmental factors affected fruit weight was highest relative contribution in saturated hydraulic conductivity of 36.5%. The bulk density and soil pH were low as relative contribution. The fruit weight was influenced by soil physical properties more than soil chemical properties. The soil environmental factors affected sugar content were hydraulic conductivity of 28.3% and organic matter content of 18.2%. The cultivation layer depth and soil pH were low as relative contribution. The fruit coloring was highest relative contribution in saturated hydraulic conductivity 55.9%. while soil pH, cation and soil texture were low. Fruit coloring was high influenced over 70% by soil physical properties. Finally, relative contribution on fruit quality related with sugar content, fruit weight, and coloring were high influenced by saturated hydraulic conductivity of 21.% and organic matter content of 18.7% but bulk density and cultivation layer depth were low relative contribution. The fruit growth and saturated hydraulic conductivity in 'Fuji' apple were very closely related. Therefore, orchard soil management to produce high quality fruit was very importance drainage management and organic matter application. We concluded that scientific soil management is possible by qualifiable of soil management factors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1168-1173
• /
• 2003

When the tube contacted to support and antivibration bar of the steam generator in unclear power plant, the contact area is worn out by their relative displacement. In the study, wear depths of the tube inclined to tube support and antivibration bar are approximately predicted by a method using the contact load and relative displacement. In the case of the inclined contact, the results show wear depths of the steam generator tube predicted by the impact model are larger than those by the sliding model.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.9-15
• /
• 2011

Any relative deformation between the cutting tool and the workpiece at machining point results directly in geometric and dimensional errors. The sources of relative deformations between the cutting tool and the workpiece at the contact point may be due to vibration, thermal deformation and cutting forces. In this paper, geometric error prediction of workpiece in turning has been investigated. To reach this goal, turning experiments are carried out according to selected cutting conditions. The variable cutting conditions are cutting speed, depth of cut and feed rate. The results will be useful as a guidance to select cutting conditions to improve the geometrical accuracy.