• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.725-734
• /
• 2010

This study conducted hydraulic testing to assess the stability of two types of pyramid-shaped artificial reefs (ARs) constructed to promote the growth of shellfish and seaweed. Previous theoretical and hydraulic experimental studies have clearly demonstrated Froude similitude. The results of this study revealed that some dimensionless design parameters affected the stability of both types of artificial reefs under various wave and current field conditions (e.g., surf similarity parameters, water particle velocity, wave pressure). In the fixed bed condition, the dimensionless water particle velocity based on the surf similarity parameter was large (about 0.4), and in the moveable bed condition, the relative water depth based on the dimensionless wave pressure was low (about 0.11). In addition, horizontal wave pressure and uplift pressure varied by relative water depth, demonstrating the tendency for wave pressure to decrease linearly with increased relative depth. These findings indicate that the development of more stable design technology forartificial reefs should be based on long-term data and additional study of sliding due to wave action. The findings also highlight the importance of hydraulic experiments in solving problems that have emerged in the design and construction of artificial reefs.

• Journal of Sensor Science and Technology
• /
• v.17 no.6
• /
• pp.462-469
• /
• 2008

In this study, we have fabricated a fiber-optic radiation sensor using an organic scintillator and plastic optical fiber for brachytherapy dosimetry. Also, we have measured relative depth dose rates of Ir-192 source using a fiber-optic sensor and compared them with the results obtained using a conventional EBT film. Cerenkov lights which can be a noise in measuring scintillating light with a fiber-optic sensor are measured and eliminated by using of a background optical fiber. It is expected that a fiber-optic radiation sensor can be used in brachytherapy dosimetry due to its advantages such as a low cost, simple usage and a small volume.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.343-344
• /
• 2010

markerless system to a two-dimensional imaging is used to estimate the depth map as a stereo vision system uses expensive equipment. We estimate the depth map from monocular image enhancement and object extracted relative to the vanishing point is estimated depth map. Augmented objects in order to get better virtual immersion depending on the distance of the objects should be drawn in different sizes. In this paper, creating images obtained from the vanishing point, and in-depth information on the augmented object, augmented with different sizes and improved engagement of inter-object interaction.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.2
• /
• pp.91-99
• /
• 2024

Collision avoidance system is important to improve the robustness and functional safety of autonomous vehicles. This paper proposes an object-level distance estimation method to develop a collision avoidance system, and it is applied to golfcarts utilized in country club environments. To improve the detection accuracy, we continually trained an object detection model based on pseudo labels generated by a pre-trained detector. Moreover, we propose object-aware depth estimation (OADE) method which trains a depth model focusing on object regions. In the OADE algorithm, we generated dense depth information for object regions by utilizing detection results and sparse LiDAR points, and it is referred to as object-aware LiDAR projection (OALP). By using the OALP maps, a depth estimation model was trained by backpropagating more gradients of the loss on object regions. Experiments were conducted on our custom dataset, which was collected for the travel distance of 22 km on 54 holes in three country clubs under various weather conditions. The precision and recall rate were respectively improved from 70.5% and 49.1% to 95.3% and 92.1% after the continual learning with pseudo labels. Moreover, the OADE algorithm reduces the absolute relative error from 4.76% to 4.27% for estimating distances to obstacles.

• 한국해양학회지
• /
• v.15 no.1
• /
• pp.58-61
• /
• 1980

Water movements at nine different layers were observed from July 31 to August 2, 1976 at station H, which has water depth 42 meters and 3km far from the coast of Wolsong, and dispersion coefficients were computed from these current data, then relative magnitudes of dispersion coefficients were calculated at each layers. Relative magnitudes of dispersion coefficients based on the surface value are 62% at 5m layer, 24% at 10m layer, 20% at 15m and 20m layers, 17% at 25m layer, 24% at 30m layer, 28% at 35m layer and 15% at bottom layer, respectively.

• Journal of Biomedical Engineering Research
• /
• v.18 no.2
• /
• pp.107-112
• /
• 1997

The effect of gamma-irradiation sterilization on molecular structural changes in orthopaedic surgical-grade polyethylene was studied. The relative crystallinity ud. percent crosslinking of the substance increased as a result of the gamma irradiation and varied anisotropically as a function of depth. Samples from the articulating surfaces showed 5% Venter relative crystallinity than those from the mid-sections, whereas samples from the mid-sections exhibited 15% greater crosslinking than those from the surfaces. These anisotropic variations are discussed in assDciation with oxidation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.682-687
• /
• 2000

In this research the remaining service life of the concrete due to the steel corrosion was predicted by three cases; causing carbonation, using sea sand, using deicing salts. In case of deterioration by carbonation, effective carbonation depth, effective coverage depth and relative humidity are considered for predicting method. In case of using sea sand, predicting method is made of rust growth equation from polarization resistance method. In case of using deicing salts, predicting method is made of transformation of Fick's law. Three methods are very useful in predicting service life of concrete.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.26-32
• /
• 2018

The Northeast China is an important site geologically and geophysically because of a huge volcano called Mt. Baekdu, which is one of the largest volcanoes in the world. Signs of eruption have been recently observed and people are keen to its behavior. We carried out relative travel time tomography to investigate the velocity structure between 100 ~ 600 km depth beneath Northeast China. We used teleseismic data during 2009 ~ 2011 recorded in NecessArray provided by IRIS (Incorporated Research Institute for Seismology). The relative observations were obtained by using the multi-channel cross-correlation method. Based on the tomographic results, we observed that the locations beneath which low-velocity zones are observed coincide with the locations of several volcanic regions in Northeast China. A low-velocity anomaly is revealed beneath Mt. Baekdu down to 600 km depth, which is thought to the main origin of the magma supply for Mt. Baekdu. Another low velocity anomaly is observed beneath east of the Datong volcano down to around 300 km depth, which is inferred to be related to an upwelling from deep mantle. We observed a low velocity anomaly beneath the Wudalianchi volcano down to around 200 km depth, which may imply that this volcano has been formed by an upwelling from the asthenosphere.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.543-546
• /
• 2002

This paper discussed micro - structure of skin concrete to understand transport properties from surface and seek thickness from surface which is seriously influenced on durability. Concrete at nearer surface has high porosity relative to inner concrete. The porosity of concrete and ISAT value at region from surface to 20 mm depth is decreased with depth. On the other hand, according to the result of ASTM C 1202 with specimen thickness, critical depth which affects fast ionic penetration through interfacial transition zone (ITZ) equals 35mm and the critical depth would be directly influenced by the effects of ITZ on chloride diffusion unrelated with W/C ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.90-93
• /
• 2003

The most common deteriorating processes of concrete structures in the world-wide are carbonation and chloride ion. In this paper, chloride profiles of carbonated concrete is predicted to considering two layer composite model, which is based on Fick's 2nd law. From the experimental result on combined deterioration of chloride and carbonation, it was examined that high chloride concentration was built up to 3-5㎜ over depth from carbonation depth. The analytical modeling of chloride diffusion, which was based on the Fick's 2nd law of diffusion, was suggested to depict the relative influence of the carbonation depth.